I just glue basted for the first time and it worked WONDERFULLY. I will probably never baste any other way again. I put the batting down and put the glue on the batting and gently pressed the quilt back smooth over it then flipped and repeated with quilt top. I used Elmers straight from bottle and got no bleed through, but I practiced first on some scraps to get my speed right so I'd have a thin line of glue. I did get a few globs and quickly spread them with a small piece of cardboard. No issues with the needle while I machine quilted it on domestic. So incredibly happy with the results. Didn't try blue basting the binding.
I have used this method and it worked great. No more spray adhesive for me. Just a suggestion - put the glue first on the batting and not the fabric (both for the backing and the top) then spread it just a bit with a spatula or something like that. I have noticed that this will significantly decrease the “bleed through” of the glue into the fabric. Thank you for this excellent tutorial.
I like your quilt ! Great pattern and colors. I experimented using Elmer’s glue on a large table runner I had just finished. I hand quilt and found that the glue was not a problem for my “between needle”. I did reinforce with some well-placed pin basting, but now I don’t think that was necessary. I did not use an iron. I let the glue set for about 24 hrs. That was all it needed here in hot, dry Arizona. This method worked well. I’ll try it on a larger quilt next.
I have done this method and it was good. I mix 50/50 of Glue to Water. Then use a foam brush to spread it so it is more even. Your method seems to be thick and is why it would have gone through the outside of the fabric. Just a suggestion. Your quilt is beautiful.
Works better to put the batting down first, apply the glue then put the quilt back over the glued batting and smooth. Then turn the whole thing over, apply glue to the batting again and smooth the top over that.
This made me feel more confident about the quilt coat I just made using glue for the first time and it taught me how to use it to bind! Very helpful video. Thank you!
In the past, I used white glue to affix patches on my husband's uniforms before sewing. I never had problems with gumming up my sewing machine. I have thread basted my quilt projects in the past but have been thinking about using white glue to baste a current project. I will bear in mind that your basting soaked through in places.
I used to glue baste. Now I use fusible tape/webbing and baste on my design wall. I also glue baste my binding and….I glue baste my quilt blocks as I rarely use pins. One caution….if one leaves to large a bead of glue to dry it can cause sewing issues as it becomes hard. This will happen if you don’t iron as the iron will flatten out the bead. I love glue. And if you are doing production phasing of your work glue will allow you to pre assemble and then pedal to metal sewing without futzing with pins
I was thinking of doing something similar with washable glue, but was thinking of diluting it with a little water, and brushing a very thin layer with a wide paintbrush. I too worried about the glue getting hard or jamming the sewing machine needle. Good to know this technique works. So much faster than pin-basting, and way cheaper than spray-baste!
This is a good way to Ruin the inside of your sewing machine or long arm as the needle when quilting pushing the glue residue inside the machine. Very Bad idea to do 👎
I use this method, with a smaller stream of glue and on the batting instead of the fabric. I give the quilt at least an hour to dry completely after ironing, and I've never had any problems with gumming up my machine.
I just glue basted for the first time and it worked WONDERFULLY. I will probably never baste any other way again. I put the batting down and put the glue on the batting and gently pressed the quilt back smooth over it then flipped and repeated with quilt top. I used Elmers straight from bottle and got no bleed through, but I practiced first on some scraps to get my speed right so I'd have a thin line of glue. I did get a few globs and quickly spread them with a small piece of cardboard. No issues with the needle while I machine quilted it on domestic. So incredibly happy with the results. Didn't try blue basting the binding.
I have used this method and it worked great. No more spray adhesive for me. Just a suggestion - put the glue first on the batting and not the fabric (both for the backing and the top) then spread it just a bit with a spatula or something like that. I have noticed that this will significantly decrease the “bleed through” of the glue into the fabric. Thank you for this excellent tutorial.
I like your quilt ! Great pattern and colors.
I experimented using Elmer’s glue on a large table runner I had just finished. I hand quilt and found that the glue was not a problem for my “between needle”. I did reinforce with some well-placed pin basting, but now I don’t think that was necessary. I did not use an iron. I let the glue set for about 24 hrs. That was all it needed here in hot, dry Arizona.
This method worked well. I’ll try it on a larger quilt next.
I have done this method and it was good. I mix 50/50 of Glue to Water. Then use a foam brush to spread it so it is more even. Your method seems to be thick and is why it would have gone through the outside of the fabric. Just a suggestion.
Your quilt is beautiful.
Works better to put the batting down first, apply the glue then put the quilt back over the glued batting and smooth. Then turn the whole thing over, apply glue to the batting again and smooth the top over that.
This made me feel more confident about the quilt coat I just made using glue for the first time and it taught me how to use it to bind! Very helpful video. Thank you!
In the past, I used white glue to affix patches on my husband's uniforms before sewing. I never had problems with gumming up my sewing machine. I have thread basted my quilt projects in the past but have been thinking about using white glue to baste a current project. I will bear in mind that your basting soaked through in places.
Watch Stitch obsessed about basting with Elmers glue ua-cam.com/video/Hw0NFtt8q2k/v-deo.html
Can you please tell me about the gorgeous quilt in this video? I love the colors you used and the bold block pattern! Thank you.
I used to glue baste. Now I use fusible tape/webbing and baste on my design wall. I also glue baste my binding and….I glue baste my quilt blocks as I rarely use pins. One caution….if one leaves to large a bead of glue to dry it can cause sewing issues as it becomes hard. This will happen if you don’t iron as the iron will flatten out the bead. I love glue. And if you are doing production phasing of your work glue will allow you to pre assemble and then pedal to metal sewing without futzing with pins
I was thinking of doing something similar with washable glue, but was thinking of diluting it with a little water, and brushing a very thin layer with a wide paintbrush. I too worried about the glue getting hard or jamming the sewing machine needle. Good to know this technique works. So much faster than pin-basting, and way cheaper than spray-baste!
That's an interesting idea! If you try it, let me know how it goes!
Wondering if glueing could be an option when hand quilting. Making the sandwich is my least favorite part about making quilts 😅
Ps your quilt is beautiful.
This is a good way to Ruin the inside of your sewing machine or long arm as the needle when quilting pushing the glue residue inside the machine. Very Bad idea to do 👎
I use this method, with a smaller stream of glue and on the batting instead of the fabric. I give the quilt at least an hour to dry completely after ironing, and I've never had any problems with gumming up my machine.
@@cbuitron1130 , I’ve read about people ruining their machines & I have an expensive Long arm so I’m Not taking chances.