engineering mode ntg 3.0 mercedes-benz s-class w221 2007-2009 NTG 3.0 part 2
Вставка
- Опубліковано 2 кві 2023
- NTG 3.0 engineering mode
IGNITION OFF
Hold mute button,push knob to right,press seat button while holding all at same time roll volume button - Авто та транспорт
I had to replace my command unit & when it got switched I lost the Aux/iPod function. Will this menu let me enable that again or do I need xentry DAS? Thanks a lot!
You will need das to enable or vediamo if you have
I don’t know if my head unit is faulty but when i press the seat button or the navi/tel nothing happens. I can’t access my dynamic seat from anywhere… any suggestions where to look to resolve the issue?
Try first to replace button panel (seat,navi/tel knob etc)
Can I activate my Aux feature from here? I had a Joytech CarPlay module installed and it currently isn’t listed as an option on my 2007 W221 when I go to the menu so the unit works, but I have no sound. I was told I have to bring it to Mercedes to have them “activate” it , can I do it myself with this method? Please help 🙏
If your car doesn't have aux as a feature,it is impossible to activate it
One more note. How can I stop the bang of the alarm while reversing
It could be an aftermarket siren installed, if it is factory option you have to use xentry to deactivate
thank you, In my car not showing tmps on the dashboard, can you please explain how can I see the tmps tire pressure on dashboard, thankd
Tire pressure monitor should be on your instrument cluster manu, and if outside temperature is not showing, you could have a bad temp sensor or missing sensor
My w221 has the central screen stuck in the air conditioning, I can't access the radio, or the rear camera or any type of adjustment, nor can I activate the air suspension at all. The radio doesn't play but you see I can't enter it either
Any recommendation ?? regards
So your screen is all blackout but just bottom a/c comand bar is on?
Entschuldigung, wie kann ich einen Comand von Japanisch auf Deutsch für das S 350 umstellen? Mir würde interessieren was für einen Comand bräucht und wie ist verbindung
If you have vediamo, you can change it
Hey, do the 2013 S550 comes with a car play inside of it?
I dont think so
Hii, I have a 2006 s320 cdi and the commands did show up, my Bluetooth isn't working with sound (but it connects to the phone it self) is there a way to turn it on? And another question is there a way to turn on the aux screen sharing there?
Ty for the video btw rlly nice explanation! You got a new sub here!
Hello! So, Bluetooth is just for talking on the phone, not for music streaming. Also, the AUX input can't be activated if you don't have it as an option.
Thanks for this useful content - for me it was only possible to enter the menue starting from screen state "Vehicle", "Display off" highlighted, all other starting points did not work for me. In the video you can see this, but it is not so obvious, perhaps you can write this also to your video comment?
Thanks for sharing that information,I'm glad it worked out for you,I will add that to description box
@@German-garage thanks I do not mean temperarure sensor I mean tire pressure sensor not shoeing on dashboard, thanks
@nidalhanbali312 tire pressure monitoring has nothing to do with comand unit or I'm not understanding what are you trying to say
You are my savior. Holy sheep shite! I was soooo bummed thought I had a defective unit or something!! You have Cashapp? I want to give you a donation, no 🧢.
@@German-garagefirst of all thank you for your video. Secondly, commenter is 100% correct , cannot enter menu at all unless exactly what he stated is on screen and selected. I had tried many many other variations hoping this was the case and was unsuccessful, his comment saved me from giving up thinking I had a defective unit.
2006 s 350 i did the same but the commands did not showed up. Is there any other way to call those commands?
- Select "vehicle" then highlight "SYSTEM SETTING" using the COMAND controller
-Push the COMAND controller to the right and hold it - Press the "seat adjustment" button and the "mute" button
Try this way
How can I adiust the clock in my car. I have bought it from japan
Setting - time and date
Hello, how do I activate this with a s350 2010 s class? The problem is it has no mute button, it has the favorite button that you could configure to massage, display off etc. How do I do this in that car?
ua-cam.com/video/0HZTVPsXCwk/v-deo.html
Thanks! Very helpful 👍
Как Входить в пункты меню?, нажимаю на джойстик ничего не происходит. Хочу включить функцию PTY в звуке
If I am understanding correctly from translation,you are not able to enter the menu by clicking?
Hello! I have a Mercedes S550 imported from Japan, I was told I cannot adjust the time (clock) because it is connected to the satellites. Is there a way to adjust it?
Yes you can deactivate it with xentry
@@German-garage thank you
@@German-garage thank u for you interested my dear I’m not a professional, please can u explain that by video, my car is S550 model 2008
@@bassamnouri3475 do you have xentry diagnostics computer?
@@German-garage no I don’t have
I have lock next to the phone icon after i have paired , will yhis help me to be able to ise my phone 2008 MB s550
I'm sure you can connect your phone via Bluetooth
Dvd player not working, it's possible active in secret menu???
It could be defective headunit or DVD module
I have s63 w221 nothing in audio working no sound what i should do please advise
Check the amplifier
I have s600 and this button is not mute is favorite how k can do it
What year is your s600?
Hi, I have a Japanese spec S600 2012 and i cant adjust the time and the cds all cannot read.
I dont know if this is a software related issue, it's what you called a bad unit in your video. If it is a bad unit what do i need to do?
Seems like your comand you is going bad when you experience those issues. You can get used comand unit. Just make sure part number matches from used to yours,you have to remove your unit to get the part number and search for used unit
@@German-garage So basically a software update won't fix this?
I dont think so but you can try software update
Hi, I have the same problem with my s550 imported from Japan. Can't set the time and can't get the time setting from the menu.
@faraway8719 The best way to go is to get another used comand unit based on your region
Can I activate my split view in this menu?
Split view is option,you can activate it but it won't work
I want to deacivate TA in a NTG 3.0 US COMAND. Where to do this?
Where are you located?
@@German-garage europe. I have das access. Can I reach you via mail?
@schraubermtc dm @German_garage instagram
@@German-garage very kind. I have no Instagram
@schraubermtc email germangarage23@gmail.com
Hello Help me please I no longer have the TV in the car I can no longer find channels
Check the amplifier might be bad or headunit
I have Japanese spec w216 and I can confirm that also this combination does not work,
You will have to use xentry or vediamo to activate
Genius , could point where exactly ? I have xentry
Send me dm instagram german_garage
please help me too. japanese 2008 cl55
Apparently the technique I use it dont work for Japanese market,sorry
The bovee adapter SUCKS
Why?
@@German-garage it doesn't work with the steering wheel buttons,
It just starts playing music randomly and you can't use your phone
You have to use an oem bluetooth adapter in order to be able to use steering wheel commands
@@German-garage can i from that menu activate back up camera?
Yes you can
But engineering mode you can't really do anything like I'd like to change the color of my command center you can't even do that
There no option for color changing