It be nice to see a song that falls outside one of the ranges and the technique in action to figure out what is causing the issue and adjusting the eq to fix. That song hit all 4 bands dead in the middle. Thank you for making the content.
First of all thanks a lot for this video and the effort you put into all that content. You are doing a great job! In this example the tonal balance was great and you didn't have to fix anything. My question is how to fix things if it doesn't fit perfectly? Is adding gain to a specific frequency with an EQ enough? Thx in advance and keep up the good work. Cheers
Sorry for getting back to you so late. If your song is close within those frequency ranges then yes you can just use gain to fix them. If they are pretty far off you're going to want to make adjustments within your mix. I suggest using this plug-in during the mixing phase and not waiting for mastering.
Hi great instructional video, I’m a solo guitarist who performs live with backing tracks (drums and bass ) there don’t seem to be target curves for just drums and bass only, have you any tips for target curves creating these type of tracks .
If you are targeting drums and bass, the low end of tonal balance will be high and decline through the lower mids and then the upper mids will be very low and the highs will go up due to the cymbals. It's hard to explain in writing but will look like a skewed smiley face favoring the low end. I guess you could say a grin. lol 👍
Nice Job explaining the plugin, but I'd like to have seen it used with a less than already perfect mix. All my song are lacking low mids and I need to learn how to fix that. A multiband compressor helps but I need to learn how to adjust the offending tracks.
Thanks for this explanation. I'm having a problem . I use Superior Drummer 3 and the problem is always with (Bass Drum) . When I use (Tonal Balance Control 2) the cursor always reads on the left although I didn't use anything like EQ or Compression. What's the solution? Thanks for the reply in advance
Hello Audio Sorcerer! I looked at your site and I wondered in relation to your mixing service what is the maximum number of tracks authorized by song because I believe that it is not specified. Thank you for your answer.
@@AudioSorcerer Thank you very much for your answer, besides I was wondering if in the context of a song the French voices are a problem for you or not at all? I listen to your work and it sounds good! So I would like to work with your service.
Thanks for this video. Well, what if the crest factor is far to the left, although the white lines are perfectly within the green areas? What will I have to do then? (I have Ozone 9, but I haven‘t got Neutron 3 and won‘t purchase it in the next few months).
Dude, if you want to do a pro audio UA-cam channel, you need to fix your audio. Put up some treatment man, I can't even listen to this. Good luck with the channel. I'm sure it is hard and you will get better over time.
Great content, great voice great face great insight but Jesus Lord, the hair is over processed straightened to death. And brushed over to one side to to the extreme. Looks like somebody just opened the door and the guest came through. Or you walked outside first into a wall of cobwebs. Just leave your hair alone it’s a distraction to your content. Everything else you’re doing is perfect and you really got it going on. Just leave leave your hair alone for God sake.
It be nice to see a song that falls outside one of the ranges and the technique in action to figure out what is causing the issue and adjusting the eq to fix. That song hit all 4 bands dead in the middle. Thank you for making the content.
First of all thanks a lot for this video and the effort you put into all that content. You are doing a great job! In this example the tonal balance was great and you didn't have to fix anything. My question is how to fix things if it doesn't fit perfectly? Is adding gain to a specific frequency with an EQ enough? Thx in advance and keep up the good work. Cheers
Sorry for getting back to you so late. If your song is close within those frequency ranges then yes you can just use gain to fix them. If they are pretty far off you're going to want to make adjustments within your mix. I suggest using this plug-in during the mixing phase and not waiting for mastering.
@@AudioSorcerer what would those adjustments be?
Individual EQ and level balancing of your tracks.
Your voice suits presentations superbly.
Thanks Rudolph! 👍
Love you bro ty this vst is a game changer for me
No problem! 🤘🤘🤘
Hi great instructional video, I’m a solo guitarist who performs live with backing tracks (drums and bass ) there don’t seem to be target curves for just drums and bass only, have you any tips for target curves creating these type of tracks .
If you are targeting drums and bass, the low end of tonal balance will be high and decline through the lower mids and then the upper mids will be very low and the highs will go up due to the cymbals. It's hard to explain in writing but will look like a skewed smiley face favoring the low end. I guess you could say a grin. lol 👍
Nice Job explaining the plugin, but I'd like to have seen it used with a less than already perfect mix. All my song are lacking low mids and I need to learn how to fix that. A multiband compressor helps but I need to learn how to adjust the offending tracks.
Did you ever figure it out?
great tutorial!, thanks!
You're welcome! 🤘🤘🤘
Fire video!!!!! THANK YOU!!!!
Thanks for checking it out! 👍
You are a great teacher! ✊🏿✊🏿✊🏿🔥🔥🔥
Thanks so much! 👍
Thanks for the video. Great content you have
Thanks so much Ari! 👍
Thanks for this explanation. I'm having a problem . I use Superior Drummer 3 and the problem is always with (Bass Drum) . When I use (Tonal Balance Control 2) the cursor always reads on the left although I didn't use anything like EQ or Compression. What's the solution? Thanks for the reply in advance
Are you checking a full mix on tonal balance or just a drum mix?
@@AudioSorcerer In both
Hello Audio Sorcerer! I looked at your site and I wondered in relation to your mixing service what is the maximum number of tracks authorized by song because I believe that it is not specified. Thank you for your answer.
I usually like to keep the max around 60 tracks before we start talking about a price increase.
@@AudioSorcerer Thank you very much for your answer, besides I was wondering if in the context of a song the French voices are a problem for you or not at all? I listen to your work and it sounds good! So I would like to work with your service.
@@GilgaFrame Thanks for checking out my work Filipe. I have mixed songs in other languages before so it shouldn't be a problem.
@@AudioSorcerer thank you Audio Sorcerer, very cool, I come back to you when I have a song ready!
Plugin looks cool. Doesn't appear to fix totally cheesy lyrics in a vocal track though.
Lamo no cap
Great tutorial! Extra points for looking like the lead singer for the Red Hot Chili Peppers 🌶
lol, I have gotten that before.
Thanks for this video. Well, what if the crest factor is far to the left, although the white lines are perfectly within the green areas? What will I have to do then? (I have Ozone 9, but I haven‘t got Neutron 3 and won‘t purchase it in the next few months).
Are you using any bus compression on your mix bus? That could help tame the dynamics a bit.
I really liked the music track
I'm glad you are digging it! 👍
bro the moon lapped earth in the time your computer moved one plugin a step down the channel strip. 😂
CONGRATULATIONS! YOU JUST GOT A NEW KOREAN SUBSCRIBER!!!
I'm global now! 😋
@@AudioSorcerer and another one here
@@97supra8 Thanks so much! 🤘
Do you master Tech house?
I master all genres.
@@AudioSorcerer thanks for the quick response. I’ll be in contact soon.
Sounds good! 👍
You must show a eq repair with this plugin, I see all the video awaiting for this 😕
x2
audio sorcerer needs to get better mic audio lmaoooooooooooo
PT in 2024? woooh.....
Eeeek! ProTools is showing its age. 👵🏾👵🏾👵🏾
What daw are you using?
Dude, if you want to do a pro audio UA-cam channel, you need to fix your audio. Put up some treatment man, I can't even listen to this. Good luck with the channel. I'm sure it is hard and you will get better over time.
damn $200 though 0.0
It's worth every penny 👍
you hopefully don't "master" in this room, because the acoustics suck quite heavy there
Great content, great voice great face great insight but Jesus Lord, the hair is over processed straightened to death. And brushed over to one side to to the extreme. Looks like somebody just opened the door and the guest came through. Or you walked outside first into a wall of cobwebs. Just leave your hair alone it’s a distraction to your content. Everything else you’re doing is perfect and you really got it going on. Just leave leave your hair alone for God sake.
Lol tonal balance 2 sucks