The idea of male and female sides is something I'll always be grateful for learning; I don't like the "sliding" aspects of magnetic clasps. The frank discussion of your tribulations with epoxying and de-magnetizing the magnets was refreshingly real and is one of the reasons we all have loved you forever.
One thing I've noticed other artists using to cut tubing is a small plumber's pipe cutter! I haven't had a chance to buy one yet and try it, but it sure worked great for them! It's a smaller than palm size, not the great big ones with handles. Cuts straight, no clean up! Also, to save some soldering, if the silver ball at the top of the cap is large enough, you can drill a hole in the center, and then just add the jump ring through there. Thanks Nancy for all your sharing, and your wonderful sense of humor! PS: I love the chain you made to use this clasp on! Do you, or will you have a video on making it?
Great suggestions! Thanks. I've used the plumber's pipe cutter and have found that it curls in the ends of the tubing. So, for me, it didn't work. Someday I'll create a good tube cutter! Thanks again. N
Oh, WOW, it is amazing! It is the first time ever I saw how to make this clasps!!! Thank you sooooooo much for sharing what you know! I might get brave and try!!!
Beautifully done video. And thanks for showing the screw ups. I'm always screwing up things (shaky hands) and am becoming a master at fixing my screw ups. I'm definitely going to try to make these because I love the idea of an using magnet clasps but don't like the premade ones. 🔥🔥🔥
There are always, will always be screw-ups. I like to call them learning experiences! Usually, though, the biggest screw-ups are in front of a live class! So much fun. Thanks so much for your feedback!
I always get excited when I see a new NLTH video available! Thanks for sharing your design and technique tutorials! You are my favorite jewelry artist on YT! I must confess my eyes always glaze over during the math formula segments of the process, so it is so appreciated when you show your written notes so I can take screenshots. I've always been math challenged so it is very helpful to see your process in writing. Love you, love your channel, love your creations! I can't wait for the next one!
Nancy love!!! Sooo good to hear your voice! Tip I've been doing that eliminated my [red handled] tube cutter; I use my Mitre vise to cut tubing, the saw blade snugs right up to the steel side of the vice and I get 90° (or 45° or 30°...) perfect tube pieces. Wire too!
Great idea Gabi! Hope you are happy and selling jewelry like crazy! Love to Sophie!!! Someday, we'll have to talk on the phone again or, better yet, visit! Love ya gal. N
Okay so I don't know about anyone else but I cannot DRILL, I snap the bits like I'm the Hulk, I've just about given up, WHAT'S MY PROBLEM???? Just for the record I'm talking about the tiny straight drills, not conical or balls
Ok, here's the intel: Slow the rotary tool down - way down!!!! Use new drill bits every so often. They do get dull! The less you lubricate and the faster you go, the sooner they wear out. I've seen students wear out a drill bit in less than an hour. Lubricate, lubricate, lubricate. Drill a little, lubricate, drill a little, etc. Hold the flex shaft or Dremel as perpendicular as you can, especially with very thin drill bits like 20 or 22 gauge. These fine bits tend to break the most. Get out a practice piece of metal and practice, practice, practice. If things go wrong, think back about what you did wrong and try again, correcting the problem. Did I say slow down and lubricate? Haha! Don't push down hard. Nice and easy - a tad harder than you would a pen or a pencil. Sometimes, if you don't need an uber precise opening, you can move the drill bit from side to side a little - that can help remove more metal but, don't push down hard when you are doing that. Remember that brass, bronze, nickel, white gold and some low karat golds are tough metals and can take a while to drill through. Watch the drill bit when you are drilling. Is it bowing? If it is, you're pushing too hard. (Wear safety goggles). Don't forget if you do break off a bit, a tablespoon of alum in (from what I can recall) a cup of water. Keep the water hot for quicker results - place it on a cup warmer in a pyrex or oven-safe cup or use a small crockpot. Leave it in the alum/water until the steel is gone. Good luck! Hope one or all of these suggestions help. Nancy
@@NancyHamiltonJewelry definitely thanks so much... Many excellent tips, i dont often drill, I was making an attempt at dangle earrings where they drilled through square wire, snap snap snap i thought maybe the bits were cheap but i broke the other ones too 😆 I'm betting I'm doing the opposite of all of the above that you mentioned
The idea of male and female sides is something I'll always be grateful for learning; I don't like the "sliding" aspects of magnetic clasps. The frank discussion of your tribulations with epoxying and de-magnetizing the magnets was refreshingly real and is one of the reasons we all have loved you forever.
Haha! Thank you so much. Alas, there are always tribulations!
Always a pleasure to watch you showing us how to make and do things. I like your humour, it makes learning fun....😄 Thank you so much : )
Particularly fascinating video for me. Watched bits over and over. Cheers Nancy.
One thing I've noticed other artists using to cut tubing is a small plumber's pipe cutter! I haven't had a chance to buy one yet and try it, but it sure worked great for them! It's a smaller than palm size, not the great big ones with handles. Cuts straight, no clean up! Also, to save some soldering, if the silver ball at the top of the cap is large enough, you can drill a hole in the center, and then just add the jump ring through there. Thanks Nancy for all your sharing, and your wonderful sense of humor! PS: I love the chain you made to use this clasp on! Do you, or will you have a video on making it?
Great suggestions! Thanks. I've used the plumber's pipe cutter and have found that it curls in the ends of the tubing. So, for me, it didn't work. Someday I'll create a good tube cutter! Thanks again. N
The clasp and book chain are stunning!!
Oh, WOW, it is amazing! It is the first time ever I saw how to make this clasps!!! Thank you sooooooo much for sharing what you know! I might get brave and try!!!
Thank you! Your videos are great! I like how you show your ooopses, but also explain your thoughts on how to fix them. ❤️
Beautifully done video. And thanks for showing the screw ups. I'm always screwing up things (shaky hands) and am becoming a master at fixing my screw ups.
I'm definitely going to try to make these because I love the idea of an using magnet clasps but don't like the premade ones. 🔥🔥🔥
There are always, will always be screw-ups. I like to call them learning experiences! Usually, though, the biggest screw-ups are in front of a live class! So much fun. Thanks so much for your feedback!
Love it thanks
Fantastic! Thanks for sharing.
Love this - thank you for the inspiration!
Great vedio 👍 , please add little bit of smile next time when you make those round moved 😍
Great job on your magnetic clasp Nancy! Thanks for the tip about the position of the magnet 🙃🙂
I always get excited when I see a new NLTH video available! Thanks for sharing your design and technique tutorials! You are my favorite jewelry artist on YT! I must confess my eyes always glaze over during the math formula segments of the process, so it is so appreciated when you show your written notes so I can take screenshots. I've always been math challenged so it is very helpful to see your process in writing. Love you, love your channel, love your creations! I can't wait for the next one!
Thank you soooooo much! I'm blushing!
Nancy love!!! Sooo good to hear your voice! Tip I've been doing that eliminated my [red handled] tube cutter; I use my Mitre vise to cut tubing, the saw blade snugs right up to the steel side of the vice and I get 90° (or 45° or 30°...) perfect tube pieces. Wire too!
Great idea Gabi! Hope you are happy and selling jewelry like crazy! Love to Sophie!!! Someday, we'll have to talk on the phone again or, better yet, visit! Love ya gal. N
Nancy! Love it! Also that chain! Is that vintage? Or did you make that!
Great video and instructions, duh 😂
👍
Okay so I don't know about anyone else but I cannot DRILL, I snap the bits like I'm the Hulk, I've just about given up, WHAT'S MY PROBLEM????
Just for the record I'm talking about the tiny straight drills, not conical or balls
Ok, here's the intel: Slow the rotary tool down - way down!!!! Use new drill bits every so often. They do get dull! The less you lubricate and the faster you go, the sooner they wear out. I've seen students wear out a drill bit in less than an hour. Lubricate, lubricate, lubricate. Drill a little, lubricate, drill a little, etc. Hold the flex shaft or Dremel as perpendicular as you can, especially with very thin drill bits like 20 or 22 gauge. These fine bits tend to break the most. Get out a practice piece of metal and practice, practice, practice. If things go wrong, think back about what you did wrong and try again, correcting the problem. Did I say slow down and lubricate? Haha! Don't push down hard. Nice and easy - a tad harder than you would a pen or a pencil. Sometimes, if you don't need an uber precise opening, you can move the drill bit from side to side a little - that can help remove more metal but, don't push down hard when you are doing that. Remember that brass, bronze, nickel, white gold and some low karat golds are tough metals and can take a while to drill through. Watch the drill bit when you are drilling. Is it bowing? If it is, you're pushing too hard. (Wear safety goggles). Don't forget if you do break off a bit, a tablespoon of alum in (from what I can recall) a cup of water. Keep the water hot for quicker results - place it on a cup warmer in a pyrex or oven-safe cup or use a small crockpot. Leave it in the alum/water until the steel is gone. Good luck! Hope one or all of these suggestions help. Nancy
@@NancyHamiltonJewelry definitely thanks so much... Many excellent tips, i dont often drill, I was making an attempt at dangle earrings where they drilled through square wire, snap snap snap i thought maybe the bits were cheap but i broke the other ones too 😆 I'm betting I'm doing the opposite of all of the above that you mentioned