A lot of viewers have been real thankful for our DIY videos and have ask if there was a way to buy us a Beer. UA-cam now has a ‘THANKS’ button under every video, Just click the button. 😀 It’s not required or expected, but it is appreciated. THANK YOU!
Thank you so much. Saved a lot of time and money. I wasn't seeing any picture when I removed either of the connectors but still proceeded to put the tape on the right connector leaving the first 10 pins and it worked like magic!
Thank you so much! We had a crazy week of our fridge, washer and 2 cars dying on us. We replaced the fridge and washer and got the cars fixed. Of course the tv would start acting up on us the second we had everything all set. Thanks to you and your great user friendly directions we didn’t have to add a tv to the list of things to buy or have someone fix. Thank you so very much! It worked!
Thank you so much for this video. Wasn't totally sure what I was doing but my dad and I tried our best to follow your instructions and we fixed it! Thank you so much!
Just did this and it 100% worked I just put tape on the right one and good as new. You saved me hundreds of dollars I hope your pillows are cool on both sides forever
Instructions unclear I am now wrapped in tape… just kidding thanks a million man! Samsung had quoted me $450 to swap the LCD panel. I owe you big time!
I have no idea how much money I have saved because of your video. Every service I called said it's not worth fixing this this and I will be better off with buying a new TV. Well little do they know, there is a godlike guy on youtube who used a small piece of tape and fixed the whole issue within MINUTES. Thank you 🙏 you are amazing!
It worked. It took me a few tries to get the right amount of pins covered. After that there was a black line of the side of the screen, that was fixed by cutting the tape in half. Thank you so much for your video!
Problem with flickering screen disappear 🫡👌 but still have that black line on … u said to cut the tape on half meaning… I tied to cut a long, then in width and still can’t manage it… can you explain me… will really appreciate
Came here to say: this worked!! Had to place the tape a 2nd time but it’s working now. I got this tv refurbished from Samsung after my first one started having issues, and a month in it started with this. Hopefully this lasts longer than the job they did! Thanks so much
Thank you! Thank you! Thank you! You're a life saver! On the Samsung communities they have you reset the image, reset the entire TV disconnect any periphicals (like that makes a difference if you have this issue on the on screen menus as well :( ) In addition to this my experience: -Pull one flat cable: no image at all -Pull the other flat cable (putting the first one back of course): no image at all So, I thought I had really broken the TV now! -Push both cables back: image was back and after a few minutes the issue re occurred. -Just taped from about the 10th pin on one of the cables (50% chance I have right one ;) ): issue seemed to be gone, but so was about 10 cm of the image on the left side :( -Cut off a piece of tape of about 4mm in width. Taped that on the place where I had just put the wider piece of tape: yes! The issue was gone and I had the complete image! So as it turns out, one can easily fix this with a piece of tape!
A repair Shop affiliated with Samsung told me that the pannel was not good anymore and to replace it it would cost me 600$ ... i tried this and it worked , thank you so much
I never write comments on UA-cam videos but this one deserves it. You saved me so much time, money, and headaches. For those reading, it did take a good amount of tries to figure out which strip needed the tape but when you get the clear picture, it’s a great feeling. Thank you SOOO much for this video and your assistance! Is there a way I can support you or your business to show my gratitude?
Well, I can't figured which connector is problematic because with one unplugged I didn't have picture at all. I used tape hack for right connector and it's fixed! Thank you:)
Thanks you.. i gave my TV to three service guys and they all said that i need new TV or repair will be expansive. Today i almost wanted buy new tv for 600€ but i tried your advice and i hope it will last. You saved much money for people out there.
This is my first ever youtube comment and it is worth it! You have saved me a large amount of money replacing my TV 👍🏽👍🏽 I did had to trial and error a couple of times between the sides as when I took the ribbon out to find which side was causing it I got a black screen 😆
I really thought that this was somekind of bull$hit. I was like it cant be real. Well turns out this works. Counted 10pins from the side and put some packaging tape on right side ribbon. And now my tv no longer flickers. Cheers bro, you literally saved me.
Very helpful and did the trick thanks. Would be interesting to know why it works. For anyone else attempting this repair, I found it much easier to guess 10 pins in (because they are tiny), put a thin strip of tape where I thought it should be (cut 2/3rds off the width of standard tape) and then took a photo on my phone and zoomed in to count them, adjusting accordingly.
Thank you for your video. I fixed my tv using this method and i confirm it works! I had to place my tape on the left ribbon connector, as that was where my problem was. I used a piece of tape about 1cm wide, on the 11th pin (leaving 10 pins unblocked from the left side)
works for me.. from 11th pin to 20th..but you have to try correct side of flexi connector.. First not worked, but i put tape on other side of connector and it worked.. great.thanks
Amazing! I don’t know how you figured out this work around! Worked on my 55” Samsung Smart TV!!! I had my doubts, thank you! You must work for Samsung to have come up with this fix!
Our TV is currently doing this, we are trying this fix, will update with results. Nothing is coming on when we disconnect either connecter, but I’ve seen other comments saying it works anyways, so I figure what do we have to lose? Edit: it works!!! Thank you!!! Saved us so much money!
I tried it and worked like a charm!! I couldn't view the TV to check which ribbon cable it was so I placed the tape about where you put it, plugged TV in got it right on the 1st try Thank you P.S. If it goes out again I think I'll just replace the Ribbon Cable
100% works. 👏👏Thanks a lot for the video buddy. My tv is samsung UE50RU7470U. I had same problem but finding which connector was causing issue was pain. If I disconnect one connector my screen will go blank not like shown in the video. So I made a lucky guess and tapped 10 pin after on right strip connector and it worked. 👏👏
I just stumbled upon your video and fixed my Samsung The Frame 2020, 55inch. It had similar issues and at first I only saw one ribbon so I was confused. After looking further I saw on the bottom two small ribbons that were connected with the big one. So these were indeed for the left and right side of the screen. However blocking pin 11-20 with tape didn't solve it entirely, as I had grey lines on top and throughout the screen and some other green lines. It was pretty watchable but I tried some more pins and eventually blocking pin 12-20 solved it entirely for me :-) Thanks so much!
Brilliant video, however it would have been good to find out how to remove the back plate of the TV. I had to watch another video to find this out. TV working perfectly again, many thanks to you.
Thank you so much, i had a problem with my tv, in this case, the left side of the panel was grey-ish and the right side was normal. I had another T-con board with different flexible cables, so i just changed the right side cable and it worked.
Thankyou! This helped me. When i tried to check which one was the issue i couldnt find it. As i removed one side the screen turned completely black. So i assumed as you did and chose the right one. And left 10 pins from the right and on the 11 i put the tape. Tape was 1 cm wide. After that screen works perfectly. Thanks
Awesome! This solution works perfectly. 😂😂 I must say it was a haslet trying to open my TV. But it paid off. I would have spent so much money for a repair service. Thanks man
Solved! Thank you , it worked. I have seen many similar clips, but only in this one is a Samsung model like mine. The problem for me was on the left plug. I succeeded the first time with a wide size but I wanted to reduce it to 3 pins. The problem reappeared but not as obvious as the first time. I came back with the wide size and it works. What changes did I make to remove these pins? What differences should I notice on the display?
Thank you so much it’s wonderful and it’s working.⭐️⭐️⭐️⭐️⭐️ One question?! ⚠️🛑🛑 With that method i will miss some features or quality of the picture ?
Hi Friend, first of all congratulations for the video. I wanted to ask you for help: I have a problem with my Samsung LE40B530P7WX TV because it has horizontal stripes. I did several tests but nothing. Could you tell me which are the PINs that I have to block with the tape, I can not understand which is the trace of the signal (VCOM, CLKN, CLKP, CPV, STV, VGM ....) that is causing the problem. A thousand thanks.
Wow! Thank you it worked. Maybe i need to cover more pins with tape... flickering has completely stopped, but i have a 1cm wide vertical black line on the left of the screen
@@repoapps hey thanks for trying to help get rid of the line, I tried leaving the 1st 9, 10, 11 & 12 pins exposed and the line is still there. Gonna put the back on... unless there's anything else I can try. Ps. I'm using 4mm wide tape
Disconnecting either side left me with no picture at all, but I just applied the tape on the right side and it worked. My tape was a bit thicker than yours and maybe covered up too many pins and left me with small black strip on the right, no flickering though.. cutting the tape in half width ways seemed to do it, smaller than that left me with horizontal lines.. anyway thanks for the solution dude
Just curious for info these pins 11-21 have definitely some function as per manufacturer...so by putting tape on these pins we block or isolate, signals/voltage, from these pins to mother board...??? And the jumping problem is resolved...??
Unreal - honestly thanks to this legend for posting this video. Also, my fix was to cover the left ribbon - 10pins from the left. Took me 5 go’s but it works!!!
Removing either ribbon just made the whole screen blank. But I tried the sticky tape anyway and it worked! Here's a tip, if you can't read the pins coz they're too small, take a close up pic on your phone then zoom in your saved photo to count how many you've taped over
Hello, I'm tempt to try that tutorial, but my symptom isn't a double line flickering like yours. I'm getting a snow dots rectangle flickering blink, like 5 cm on the right. Would covering the 'CKV' like also be the solution ?
Mixed results on my 50 inch Samsung UN50NU6900. Less flickering but still twitches, I will let it run for a few hours to see if it worsens. I have to redo the tape and zoom some pics to make sure I covered all the right pins 11-20. This really seems to get worse as temperature increases and, as an electronics engineer, I am tempted to reflow the board as a last resort to see if that fixes it. What signals are present in those blocked pins 11-20, please ? I would like to understand WHY we are blocking those pins. Thank you.
Have the same issue. When removing both ribbon cables the screen remained black. Tried covering the said pinouts as instructed in the video and comments but the flickering still persisted. Tried different combinations also. Is there anything else I could try?
It works for me my LG 55UH615T 😅. A bit of trial and error as I am not sure which side to stick on and how many pin should I and should I not cover. However, I don't understand how cover some of the pins fixed the flickering issue. Something to do with CKV line.
Stupidly easy fix for an even stupider issue, this worked for me too! Cut some tape in half and covered ten pins from the right on the right strap and it worked!
Hello, I have a Samsung UE43NU7442U with the same issue, but it’s flickering a lot more than your TV does. Can this fix be used with my TV too? They are really similar to each other. And also, did you cover the 10th pin too or only the 11th?
This worked to solve the initial jumping display but drastically reduced the color output on the left side. I replaced the Tcon cables on both sides and the jumping issue returned so I put the taped cable back.
The question would be what pins are really the culprit? Are there pins I can leave uncovered that will fix the color issue without reintroducing the jumping issue?
Thank you for the video! It's fixed the issues however i can't seem to get the color to correctly work now. It's fades the color out now from left to right. Might be time for a new tv. Thank you though
This worked for me, I disconnected those 2 strips trying to trouble shoot which side was bad and the screen wouldn’t illuminate if only 1 was connected so I reconnected both sides and the double-vision flickering went away, I guess they just needed to be re-seated
Thanks for the video, I tried the trick and it worked for the flickering (right band was damaged) but now I have a vertical black line on the left outer part of the screen. Do you know what I can do about it ?
A lot of viewers have been real thankful for our DIY videos and have ask if there was a way to buy us a Beer. UA-cam now has a ‘THANKS’ button under every video, Just click the button. 😀 It’s not required or expected, but it is appreciated. THANK YOU!
What kind of tape and why 10 spots over?
bro how much would it cost to do this in a shop?
Thank you so much. Saved a lot of time and money. I wasn't seeing any picture when I removed either of the connectors but still proceeded to put the tape on the right connector leaving the first 10 pins and it worked like magic!
Thank you so much! We had a crazy week of our fridge, washer and 2 cars dying on us. We replaced the fridge and washer and got the cars fixed. Of course the tv would start acting up on us the second we had everything all set. Thanks to you and your great user friendly directions we didn’t have to add a tv to the list of things to buy or have someone fix. Thank you so very much! It worked!
Thank you soooooo much!!! I just fixed my 49” LG now with your instructions!! You deserve a million likes!! 🙌🏻
Thank you so much for this video. Wasn't totally sure what I was doing but my dad and I tried our best to follow your instructions and we fixed it! Thank you so much!
Just did this and it 100% worked I just put tape on the right one and good as new. You saved me hundreds of dollars I hope your pillows are cool on both sides forever
Instructions unclear I am now wrapped in tape… just kidding thanks a million man! Samsung had quoted me $450 to swap the LCD panel. I owe you big time!
I have no idea how much money I have saved because of your video. Every service I called said it's not worth fixing this this and I will be better off with buying a new TV. Well little do they know, there is a godlike guy on youtube who used a small piece of tape and fixed the whole issue within MINUTES. Thank you 🙏 you are amazing!
It worked. It took me a few tries to get the right amount of pins covered. After that there was a black line of the side of the screen, that was fixed by cutting the tape in half. Thank you so much for your video!
I literally had 100% same issue. Cut the tape in half solved the black line, flickering is gone too. This man is godlike
Problem with flickering screen disappear 🫡👌 but still have that black line on … u said to cut the tape on half meaning… I tied to cut a long, then in width and still can’t manage it… can you explain me… will really appreciate
Came here to say: this worked!! Had to place the tape a 2nd time but it’s working now. I got this tv refurbished from Samsung after my first one started having issues, and a month in it started with this. Hopefully this lasts longer than the job they did! Thanks so much
You have or had jutter not flicker.
Thank you! Thank you! Thank you! You're a life saver! On the Samsung communities they have you reset the image, reset the entire TV disconnect any periphicals (like that makes a difference if you have this issue on the on screen menus as well :( )
In addition to this my experience:
-Pull one flat cable: no image at all
-Pull the other flat cable (putting the first one back of course): no image at all
So, I thought I had really broken the TV now!
-Push both cables back: image was back and after a few minutes the issue re occurred.
-Just taped from about the 10th pin on one of the cables (50% chance I have right one ;) ): issue seemed to be gone, but so was about 10 cm of the image on the left side :(
-Cut off a piece of tape of about 4mm in width. Taped that on the place where I had just put the wider piece of tape: yes! The issue was gone and I had the complete image!
So as it turns out, one can easily fix this with a piece of tape!
A repair Shop affiliated with Samsung told me that the pannel was not good anymore and to replace it it would cost me 600$ ... i tried this and it worked , thank you so much
Happy For You 😊
I never write comments on UA-cam videos but this one deserves it. You saved me so much time, money, and headaches. For those reading, it did take a good amount of tries to figure out which strip needed the tape but when you get the clear picture, it’s a great feeling. Thank you SOOO much for this video and your assistance! Is there a way I can support you or your business to show my gratitude?
Well, I can't figured which connector is problematic because with one unplugged I didn't have picture at all. I used tape hack for right connector and it's fixed! Thank you:)
Thanks you.. i gave my TV to three service guys and they all said that i need new TV or repair will be expansive. Today i almost wanted buy new tv for 600€ but i tried your advice and i hope it will last. You saved much money for people out there.
This is my first ever youtube comment and it is worth it! You have saved me a large amount of money replacing my TV 👍🏽👍🏽
I did had to trial and error a couple of times between the sides as when I took the ribbon out to find which side was causing it I got a black screen 😆
I really thought that this was somekind of bull$hit. I was like it cant be real. Well turns out this works. Counted 10pins from the side and put some packaging tape on right side ribbon. And now my tv no longer flickers. Cheers bro, you literally saved me.
Not clear. So we have ti left 10 mins and need to put tape from 11th pin? How many pins we have to block?
Very helpful and did the trick thanks. Would be interesting to know why it works. For anyone else attempting this repair, I found it much easier to guess 10 pins in (because they are tiny), put a thin strip of tape where I thought it should be (cut 2/3rds off the width of standard tape) and then took a photo on my phone and zoomed in to count them, adjusting accordingly.
Thank you for your video.
I fixed my tv using this method and i confirm it works! I had to place my tape on the left ribbon connector, as that was where my problem was. I used a piece of tape about 1cm wide, on the 11th pin (leaving 10 pins unblocked from the left side)
works for me.. from 11th pin to 20th..but you have to try correct side of flexi connector.. First not worked, but i put tape on other side of connector and it worked.. great.thanks
Amazing! I don’t know how you figured out this work around! Worked on my 55” Samsung Smart TV!!!
I had my doubts, thank you!
You must work for Samsung to have come up with this fix!
i'm happy for you 😉
Thank you so so much. I calculated precisely from 11th to 20th pin and put the tape over. All the problems are fixed. I really can't thank you enough.
Thanks bro it was a smooth fix for me. 🙃
The tricky part is counting the 11th to 20th on the ckv cable other than that, everything is easy.
Best repair video on youtube. Fix my tv in 20 min. Thanks you so much.
Took me a bit of time to get the back of and to find the pins but can confirm. This 100% works. Great video. Thanks man.
Our TV is currently doing this, we are trying this fix, will update with results. Nothing is coming on when we disconnect either connecter, but I’ve seen other comments saying it works anyways, so I figure what do we have to lose?
Edit: it works!!! Thank you!!! Saved us so much money!
Can’t thank you enough man I just saved around 150$ following your method 👏🏽
happy for you ❤️
I tried it and worked like a charm!! I couldn't view the TV to check which ribbon cable it was so I placed the tape about where you put it, plugged TV in got it right on the 1st try Thank you P.S. If it goes out again I think I'll just replace the Ribbon Cable
Worked perfectly! Thank you so much for making this video
Worked for me too! Had to cut the tape in half so it didn’t cover as many pins, thank you very much that’s saved us a lot of money 🙏
100% works. 👏👏Thanks a lot for the video buddy. My tv is samsung UE50RU7470U. I had same problem but finding which connector was causing issue was pain. If I disconnect one connector my screen will go blank not like shown in the video. So I made a lucky guess and tapped 10 pin after on right strip connector and it worked. 👏👏
Where is he getting 10 from? I’m counting 12 to where he put the tape and 20 to where that burnt line is
I just stumbled upon your video and fixed my Samsung The Frame 2020, 55inch. It had similar issues and at first I only saw one ribbon so I was confused. After looking further I saw on the bottom two small ribbons that were connected with the big one. So these were indeed for the left and right side of the screen.
However blocking pin 11-20 with tape didn't solve it entirely, as I had grey lines on top and throughout the screen and some other green lines. It was pretty watchable but I tried some more pins and eventually blocking pin 12-20 solved it entirely for me :-) Thanks so much!
As crazy as this repair looks, it really does work. Thank you
For me, it took some time to figure out the 10th pin and after that, the trick worked for me as well. Thanks
Brilliant video, however it would have been good to find out how to remove the back plate of the TV. I had to watch another video to find this out. TV working perfectly again, many thanks to you.
Thank you so much, i had a problem with my tv, in this case, the left side of the panel was grey-ish and the right side was normal. I had another T-con board with different flexible cables, so i just changed the right side cable and it worked.
Worked for me! much appreciated! Your video has really helped fix my tv it wasn’t bs!
TYSM THIS WORKED AFTER MULTIPLE TRIES (FIRST TIMES LEFT HALF FLICKERING)
This worked perfectly! Thank you so much!
Thankyou! This helped me. When i tried to check which one was the issue i couldnt find it. As i removed one side the screen turned completely black. So i assumed as you did and chose the right one. And left 10 pins from the right and on the 11 i put the tape. Tape was 1 cm wide. After that screen works perfectly. Thanks
happy for you 😉
Awesome! This solution works perfectly. 😂😂 I must say it was a haslet trying to open my TV. But it paid off. I would have spent so much money for a repair service. Thanks man
Hi Ian also having trouble trying to open TV, what did you use to get the screews out
Tbarkellah 3lik...... I fixed my problem using your hint! it works perfect thanks a lot!
Thanks Sir, i tried it and it worked wonders...big thanks to you and wishing you the best in your future endeavors
Seemed wayyy to good to be true. I cannot believe this actually worked! I cannot thank you enough! Worked on my 2018 LCD
Worked for me - took several attempts to get the right pins covered but definitely worked - THANK YOU
how to find the right pin????
@@risvymahi3118 Trial and error!
Thank you so much. I was about to bin my Samsung and your fix worked with some trial and error. I can now watch the football later today.
THANK YOU!!!! WORKED GREAT AFTER I TAPED IT! SAVED ME HUNDREDS OF DOLLARS
Happy for you 😉
Amazing, thanks for this. Can't believe it worked! Would like to know what exactly covering the pins has done - what has it disabled?
it's ckv signals
Solved! Thank you , it worked. I have seen many similar clips, but only in this one is a Samsung model like mine. The problem for me was on the left plug. I succeeded the first time with a wide size but I wanted to reduce it to 3 pins. The problem reappeared but not as obvious as the first time. I came back with the wide size and it works. What changes did I make to remove these pins? What differences should I notice on the display?
no need to remove the pins just use a tape to isolate it , no difference.
happy for you 😊
It works!!!!!! Yehey. Wow. It's like magic in our tv Thank you. ❤❤❤❤
Thank you so much it’s wonderful and it’s working.⭐️⭐️⭐️⭐️⭐️
One question?! ⚠️🛑🛑
With that method i will miss some features or quality of the picture ?
no , happy for you 😉
This was a massive help. Thanks a lot
Hi Friend, first of all congratulations for the video. I wanted to ask you for help: I have a problem with my Samsung LE40B530P7WX TV because it has horizontal stripes. I did several tests but nothing. Could you tell me which are the PINs that I have to block with the tape, I can not understand which is the trace of the signal (VCOM, CLKN, CLKP, CPV, STV, VGM ....) that is causing the problem. A thousand thanks.
Wow! Thank you it worked. Maybe i need to cover more pins with tape... flickering has completely stopped, but i have a 1cm wide vertical black line on the left of the screen
cover just 9 or 10 pin
@@repoapps hey thanks for trying to help get rid of the line, I tried leaving the 1st 9, 10, 11 & 12 pins exposed and the line is still there. Gonna put the back on... unless there's anything else I can try. Ps. I'm using 4mm wide tape
Disconnecting either side left me with no picture at all, but I just applied the tape on the right side and it worked.
My tape was a bit thicker than yours and maybe covered up too many pins and left me with small black strip on the right, no flickering though.. cutting the tape in half width ways seemed to do it, smaller than that left me with horizontal lines.. anyway thanks for the solution dude
This helped me alot tnx alot you saved me you just a new subscriber (hisense vidaa smart tv)55inches
currently having this same issue. Tried common fixes but doesn't fix issue. Im gonna try your fix and hope it will work.
Thank tou so much my friend you fix my tv,thanks for your help,keep up the good work and the help you provide...!!!!
you're welcome 😉
Just curious for info these pins 11-21 have definitely some function as per manufacturer...so by putting tape on these pins we block or isolate, signals/voltage, from these pins to mother board...??? And the jumping problem is resolved...??
Unreal - honestly thanks to this legend for posting this video.
Also, my fix was to cover the left ribbon - 10pins from the left. Took me 5 go’s but it works!!!
Thank for the video it helped me out.. all i had to do was flip the scripts now my tv is working fine....i really appreciate you
Wdym flip the scripts?
Thank you bro, I fix my father's TV in less than 30min, cheers
Wasnt expecting this, but it works😂❤
Removing either ribbon just made the whole screen blank. But I tried the sticky tape anyway and it worked! Here's a tip, if you can't read the pins coz they're too small, take a close up pic on your phone then zoom in your saved photo to count how many you've taped over
How many are you supposed to tape over from the 10th pin ?
10 pins
@@repoapps thanks
From the 10th pin on wards? Or start at 0
yes from the 10th pin cover 10 pins
Hello, I'm tempt to try that tutorial, but my symptom isn't a double line flickering like yours. I'm getting a snow dots rectangle flickering blink, like 5 cm on the right. Would covering the 'CKV' like also be the solution ?
Thanks a lot Hero, greetings from Poland
worked like a charm! thankful for this video! you saved my TV. on to buy new sneakers instead 😂
Thanks youuuuuuuuuuuuuuuuuuuu. This worked for us!!!!!!
Thx for the help . Only one question is it the same for all smart TVs I got Philips model 43PUS6523/12 do ps. replay me ASAP
Thanks ! Works for me
thank you so much. it work again! 😄
Mixed results on my 50 inch Samsung UN50NU6900. Less flickering but still twitches, I will let it run for a few hours to see if it worsens. I have to redo the tape and zoom some pics to make sure I covered all the right pins 11-20. This really seems to get worse as temperature increases and, as an electronics engineer, I am tempted to reflow the board as a last resort to see if that fixes it. What signals are present in those blocked pins 11-20, please ? I would like to understand WHY we are blocking those pins. Thank you.
Thanks for lowering my bp 😉, it worked
Have the same issue. When removing both ribbon cables the screen remained black. Tried covering the said pinouts as instructed in the video and comments but the flickering still persisted. Tried different combinations also. Is there anything else I could try?
It works for me my LG 55UH615T 😅. A bit of trial and error as I am not sure which side to stick on and how many pin should I and should I not cover. However, I don't understand how cover some of the pins fixed the flickering issue. Something to do with CKV line.
It worked ! Thanks a ton
you're welcome 😉
Stupidly easy fix for an even stupider issue, this worked for me too! Cut some tape in half and covered ten pins from the right on the right strap and it worked!
Thanks. It fixed mine but it seems screen casting started malfunctioning afterwards. Please is there a fix for it as well?
Wow..thanks a lot mate works a treat
Happy to help
I'm not sure why but that actually worked, my tv was flickering, I put some tape on the damaged ribbon and that's it... Thanks!!
happy for you 😊
is your tv still alive? my tv started flickering up and down about a day ago and i want to do this but idk how it will work out in the long run
@@AIZRN i did this not too long ago and it works perfectly fine
Worked perfectly for me, again the problem started .. what to do
Hello, I have a Samsung UE43NU7442U with the same issue, but it’s flickering a lot more than your TV does. Can this fix be used with my TV too? They are really similar to each other. And also, did you cover the 10th pin too or only the 11th?
just try , yes the 11th then 9pins
@@repoapps Alright, thank you! :)
Thank you!
I just fixed a Samsung 42”
This worked to solve the initial jumping display but drastically reduced the color output on the left side. I replaced the Tcon cables on both sides and the jumping issue returned so I put the taped cable back.
The question would be what pins are really the culprit? Are there pins I can leave uncovered that will fix the color issue without reintroducing the jumping issue?
Thanks master. But what was the reason of this problem such that putting a tap fixes it?
Thank you for the video! It's fixed the issues however i can't seem to get the color to correctly work now. It's fades the color out now from left to right. Might be time for a new tv. Thank you though
just cover 10pins if you cover more then that the picture may be not correct
BEST HACK VIDEO EVER, THANK YOU! 😀👍
This worked for me, I disconnected those 2 strips trying to trouble shoot which side was bad and the screen wouldn’t illuminate if only 1 was connected so I reconnected both sides and the double-vision flickering went away, I guess they just needed to be re-seated
❤️ good info
Very nice video.
It worked THANK YOU
Iam very thankful to your video
Had to guess on mine, but I used some scotch tape to cover pins 10-20 on the right strip, and my screen flickering is now gone! Samsung un50mu6300f
yeah mine too. Samsung are awful quality.
OMG, can't believe this worked on the 1st try and I winged it as well, thanks lol
Thx it worked 🙂
Amazing, its worked
Could I buy another of the ribbons that you are disconnecting I see amazon has them for 20$ would that work?
Two words Sir......... Thank You
Thanks for the video, I tried the trick and it worked for the flickering (right band was damaged) but now I have a vertical black line on the left outer part of the screen. Do you know what I can do about it ?
you need to make the tape smaller and block less pins
Yes this worked for me too! Tape less pins!! Thank you 🙏
then how much pin i must cover with tape ?? my tv panasonic, not android tv, but led tv
8:37 if i calculate correct you i see the first 12 golden are left out and then 17 golden pins are taped after wards?