I make 4-stroke Engine from a Fridge Compressor

Поділитися
Вставка
  • Опубліковано 24 лип 2021
  • ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
    ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
    ╠╗║╚╝║║╠╗║╚╣║║║║║═╣
    ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ NOW, FOR FREE: bit.ly/MyBestDIY​
    #fridgecompressor
    #4strokeengine
    #generator
  • Наука та технологія

КОМЕНТАРІ • 745

  • @kinghomemade
    @kinghomemade  3 місяці тому

    *I turn fridge compressor into a 12v fridge compressor* ua-cam.com/video/TVXLXwhZaoA/v-deo.htmlsi=4XJkcupmX3cIpRwn

  • @user-oe9dn8ot5x
    @user-oe9dn8ot5x 2 роки тому +66

    От клапанов я вообще ржал до икоты 😂. И от ГРМ тоже 😂 Хочется услышать мнение Доктора Дью.

    • @GHOST-tz8hz
      @GHOST-tz8hz 2 роки тому +5

      Я тоже вахуях

    • @lamie3958
      @lamie3958 2 роки тому +3

      Там даже нету топливо в трубках, че за хуита

    • @gold4808
      @gold4808 2 роки тому +3

      Тупо наебалдаже дыма нет тока непонятно как оно крутится

    • @motoson04
      @motoson04 2 роки тому +3

      @@gold4808 скорее всего там эфир. А он и без клапанов работать сможет. Как авиа модельные двигатели типа мк...компрессионного типа.

    • @vape_bar7286
      @vape_bar7286 Рік тому +4

      Доктор дью повторит эту самоделку,ещё и проверит😏

  • @paulandrulis4672
    @paulandrulis4672 2 роки тому +59

    If you watch, the rotation of the crankshaft opens the exhaust valve first, then rolls over and opens the intake as the exhaust closes. Simple and ingenious. This is actually a two stroke design, not four stroke, as the two valves act like reed valves would. It is still cool. Wouldn't last long without oiling, but a compressor was never designed to work like an engine, so can't have it all ways at once, lol. Slick work there King Homemade.

    • @hiiiiii5280
      @hiiiiii5280 2 роки тому +3

      Your missing the point that its homemade

    • @airsight2753
      @airsight2753 2 роки тому +13

      Fake engine, look at the vapor carburetor he put it backward how it will run? 😆😆

    • @paulandrulis4672
      @paulandrulis4672 2 роки тому +1

      Carefully

    • @leorenzoduce2502
      @leorenzoduce2502 2 роки тому +6

      @@hiiiiii5280 you are missing the point too that it's fake

    • @hiiiiii5280
      @hiiiiii5280 2 роки тому +2

      @@leorenzoduce2502 well sorry if i came on too hard, did not mean it that way but who said it was real

  • @babakleg
    @babakleg Рік тому +32

    А я и не знал, что реле топливного насоса от мотоцикла может выдавать ток высокого напряжения для свечи. А приварить свечу вместо того чтобы нарезать для нее резьбу это вообще топ. Я на своем мотоцикле также сделаю 😆

    • @m1sst4k37
      @m1sst4k37 Рік тому +6

      какое реле топливного насоса? это коммутатор. а вот свеча да, это позор

    • @user-fk9kq9dj3u
      @user-fk9kq9dj3u 11 місяців тому +1

      ​@@m1sst4k37 этот способ реал работает?

    • @m1sst4k37
      @m1sst4k37 11 місяців тому +1

      @@user-fk9kq9dj3u в видео? не
      двигатель из холодильника компрессора можно сделать, но не как в видео

    • @user-fk9kq9dj3u
      @user-fk9kq9dj3u 11 місяців тому +1

      @@m1sst4k37 а как по другому

    • @maraksaman4538
      @maraksaman4538 2 місяці тому

      ​@@m1sst4k37ну

  • @eswaramoorthya2943
    @eswaramoorthya2943 2 роки тому +42

    1 fire for 2round of center shaft
    In other words
    Inlet and exhaust valves operated 1 time when rotor rotates 2 times timing gear ⚙️needed
    This is one type of compressor but not 4 stroke engine

  • @offroadoutlawspro7954
    @offroadoutlawspro7954 Рік тому +9

    It’s crazy how it can go so fast it appears to be going in slow motion. Great Job.

  • @user-ty5et8xe9b
    @user-ty5et8xe9b 2 роки тому +32

    Хотябы шланги правильно поставил бы чтоб все поверели

  • @user-nc2mr4zx9g
    @user-nc2mr4zx9g 2 роки тому +62

    Engineers: dies from cringe

  • @LucasOliveira-dm8mb
    @LucasOliveira-dm8mb 2 роки тому +40

    Que bom que ninguém aqui é engenheiro pq esse negócio não é 4 tempos em nenhum lugar do mundo. As 2 "válvulas" abrem ao msm tempo e a cada 360° do motor.

    • @migfer7
      @migfer7 2 роки тому +16

      para mim é falso ,há muita coisa errada na construção.

    • @hectorreyes1378
      @hectorreyes1378 2 роки тому +2

      De hecho creo que tienes razón hay muchas fallas

    • @fatimaaraujo8827
      @fatimaaraujo8827 2 роки тому +2

      @@migfer7 mas rapaz essa mentiras é só pra gente se divertir kkkk

    • @DreafouShadow
      @DreafouShadow Рік тому +2

      E o combustível esta agindo contra as leis da gravidade. Kkkk

    • @gabrielv.4358
      @gabrielv.4358 Рік тому

      Nē kkk

  • @pablotristan9080
    @pablotristan9080 2 роки тому +11

    Me gusto mucho tu trabajo, pero pudiste haber calculado el diámetro para hacerle roscado con un machuelo donde va la bujia. Saludos

  • @iacopotuttino5515
    @iacopotuttino5515 Рік тому +2

    It’s built like a four stroke but it’s actually a two one…but very very good!

  • @qwertykeyboard5901
    @qwertykeyboard5901 9 місяців тому

    This just gives me more ideas on a gas powered refrigeration compressor.
    5cc 2 stoke would probably do the trick. Make it run at really low RPMs and it should both be cool&quiet and sip gas.

  • @DatBlueHusky
    @DatBlueHusky 10 місяців тому

    this guy is something else. why would you not thread the holes for the spark plug but freaking welds it in?

  • @forestgimblett2364
    @forestgimblett2364 2 роки тому +3

    That's a new one , now run it on wood stove smoke . And a little vegetable oil for lube .see were I'm going .Very good !

  • @topgeah
    @topgeah 2 роки тому +8

    The drill and engine sounds come straight from the Let’s Make Something video

    • @stievenbulanadi6035
      @stievenbulanadi6035 2 роки тому

      Hahahaha i knew him hes my fav youtuber

    • @fullmetaljacket7
      @fullmetaljacket7 2 роки тому

      Definitely is! LOL ua-cam.com/video/Bk4RND5AbRc/v-deo.html Good thing I was not the only one to spot it.

    • @stievenbulanadi6035
      @stievenbulanadi6035 2 роки тому

      He was the first one who made that engine i think🤔🤔🤔

  • @johnzillner1596
    @johnzillner1596 Рік тому

    First time I've seen anyone tig weld and walk the cup backwards ! LMAO 😜🤪

  • @fooman2108
    @fooman2108 2 роки тому +26

    Wouldn't it have been better to drill/tap the plug hole rather just weld the plug in (which also will give you a small compression leak I would bet)?

    • @Gremlin_868
      @Gremlin_868 2 роки тому +11

      I'm sure that was to original plan put he drilled it to big 😂😂

    • @captaincrunch8464
      @captaincrunch8464 2 роки тому +10

      The Video is fake

  • @aurelienddx8003
    @aurelienddx8003 Рік тому +12

    well many things to say.
    First you can't get high voltage for spark from a CDI you need high voltage coil
    The inlet port is directly on a liquid (wich look like water ) but the hose is empty
    This engine is probably 3.5 or 4cc but sound like a way bigger
    No smoke coming out the exhaust,

  • @carlaosilva3603
    @carlaosilva3603 Рік тому +11

    Mais verdadeiro que nota de 3 real kkkkkkkk

  • @jorgemdk5608
    @jorgemdk5608 2 роки тому +23

    1.- las válvulas abren prácticamente al mismo tiempo
    2.- no hay tiempo de compresión
    3.- no hay humo ni explosiones visibles
    4.- no hay flujo de combustible cor la manguera transparente
    5.- no hay ningún tipo de movimiento en el combustible ( eso no succiona nada)
    6.- y el carburador ???
    7.- creo que es muuuy falso
    8.- como enciendes una bujía solo con un CDI? Sin usar una bobina?

    • @jvps.
      @jvps. 2 роки тому +2

      Falou tudo ermaño

    • @olafanders5698
      @olafanders5698 2 роки тому +1

      you are totally correct, i have had the same Thouths

    • @hoangphuong7436
      @hoangphuong7436 Рік тому

      Ok giong nhu ban

  • @bambangsuprayitno1201
    @bambangsuprayitno1201 2 роки тому +1

    Tutorial seperti ini penting untuk bangsa pemula yg mencari ilmu asalkan jangan lepas dr hukum2 tehnik tutorial itu sendiri lanjut

  • @bahruji4179
    @bahruji4179 2 роки тому +1

    Sangat cocok menurutku Asalkan bisa mengatur antara putaran jarak antara roda/arah piston maju/mundur/antara/tutup buka udara/tutup buka pembakaran api yg memecah sehingga piston terdorong

  • @bintangdemarta9952
    @bintangdemarta9952 Рік тому

    Keren kayaknya yak anak teknik mesin tugas akhir nya bikin ginian 😁

  • @arfei88
    @arfei88 Рік тому +2

    Впечатляет.
    Жаль, что нет разъяснений. А хотелось бы. Принцип, устройство, этапы, последовательность, информация о создаваемых и применяемых деталях и технических решениях.

    • @MrRusty-fm4gb
      @MrRusty-fm4gb Рік тому

      Wouldn’t you want the data sheets too for all the components?

    • @kamehameha1377
      @kamehameha1377 Рік тому +2

      Это фейковое видео.
      Мопедное зажигание не работает с датчиками холла, да и вместо датчика он припаял конденсатор, ГРМ вообще ору, одновременно впуск и выпуск открываются в конце 1 оборота, ну и до кучи, где пузыри в банке с бензином при запуске, ведь мотор потребляет воздух пр работе.

  • @n0tlance314
    @n0tlance314 2 роки тому +8

    Never seen a 4 stroke that doesn't need timed valves, doesn't need oil, or properly timed ignition system.

    • @mx125dave
      @mx125dave 2 роки тому +5

      yes, fake

    • @nicolafoudre
      @nicolafoudre Рік тому

      My dude is turning the engine like it has no compression

  • @firebladex8586
    @firebladex8586 2 роки тому

    3:19 I gotta try this method of cutting metal!

  • @joemason9187
    @joemason9187 Рік тому +1

    Absolutely awesome

  • @davidhile5363
    @davidhile5363 Рік тому

    Even if this thing did work how long would it last without a lubrication or cooling system ?????

  • @Laughing_Central638
    @Laughing_Central638 9 місяців тому

    Bro learned value working principle in macdonalds washroom😂

  • @paulsiviour7001
    @paulsiviour7001 Рік тому +2

    Incredible working model. Well done

  • @lepajama9139
    @lepajama9139 2 роки тому

    which type of fuel are you using in this engine?

  • @hugorios3414
    @hugorios3414 2 роки тому +1

    Disculpe mi ignorancia, pero no idea tengo lo que hiciste. ..saludo desde Paraguay, América del sur 🙋

  • @TOTOMOTOR
    @TOTOMOTOR 2 роки тому +2

    Beautifull work.... 🔥👍👍

  • @dhandapanianbu0477
    @dhandapanianbu0477 Рік тому

    What oil use.................?

  • @dungtrananh1522
    @dungtrananh1522 2 роки тому +3

    How do you timing between intake and exhaust camshafts?

    • @idunnksupurmom
      @idunnksupurmom 2 роки тому

      It depends on the engine I guess and whether or not you want to retard or advance the timing to keep the intake or exhaust valve open longer, but in general they are close to 90° apart I do believe but they are on a 2:1 ratio with the crankshaft

  • @AnalisandoSampa
    @AnalisandoSampa 9 місяців тому

    It is strange that the valve cam is being driven by the main motor shaft while in four-stroke engine it is by a secondary shaft that rotates half the rotational speed.

  • @ashwantnaidu9888
    @ashwantnaidu9888 2 роки тому

    Why Do Fridge Compressors Make The Howling Noise When Running?.

  • @DaVeHiLl200
    @DaVeHiLl200 2 роки тому +39

    I have a challenge for you brother.
    Make a hydrogen fuel cell (easy) make the motor run on hydrogen and produce electricity, then take some of the electricity created to power the hydrogen fuel cell (around 12v) and the rest of the electricity created is disposable.
    If you can do this you have created a Zero Point Energy Device, a water powered electricity generator 😁
    Do you accept my challenge brother?
    I think you will do it easily.
    For your hydrogen fuel cell use two stainless steel food whisks and put a stainless steel scouring pad inside, very efficient 👍🏼✌😊🙏

    • @2gaming184
      @2gaming184 2 роки тому

      Baler chele

    • @dipangameing2138
      @dipangameing2138 2 роки тому +1

      making a fool🤣

    • @wompstopm123
      @wompstopm123 2 роки тому +2

      it takes more energy to break a water molecule into hydrogen than you get out of burning hydrogen

    • @peter7582
      @peter7582 Рік тому

      Just make a perpetual motion machine, bro

    • @gabrielv.4358
      @gabrielv.4358 Рік тому

      Amazingg

  • @gorandiaye50
    @gorandiaye50 6 місяців тому

    merci pour votre excellent travail

  • @marcellfeher5784
    @marcellfeher5784 9 місяців тому

    What kind of fuel is in the tank? (gasoline?)

  • @celsoconceicao6575
    @celsoconceicao6575 2 роки тому +4

    Parabéns gostaria de saber de vc quanto vc cobrar para fabricar um moto desse pra mim,meu nome é Celso

  • @kurimaw1161
    @kurimaw1161 2 роки тому

    My humor is so broken, im deadass laughing At that sound 1:02

  • @roscoe454
    @roscoe454 2 роки тому +2

    your fuel fumes hose is below the liquid...your spoof might have fooled me til i saw that your hoses were backwards for the fuel input side...

  • @JROrg2009
    @JROrg2009 2 роки тому +6

    Most interesting indeed. What precise tool / make /model are you welding with ?

    • @JjMn1000
      @JjMn1000 2 роки тому

      It seems to be a tig welder.

  • @orguezdj2981
    @orguezdj2981 2 роки тому

    Hello. You use fuel? or waht.thanks

  • @fanatikfanatikoff
    @fanatikfanatikoff Рік тому +15

    Минусуй видос если от доктора!😂

    • @user-sf2px7bg3d
      @user-sf2px7bg3d 4 місяці тому

      Сам понял что сказал?

    • @fanatikfanatikoff
      @fanatikfanatikoff 4 місяці тому +1

      @@user-sf2px7bg3d да

    • @user-sf2px7bg3d
      @user-sf2px7bg3d 4 місяці тому

      @@fanatikfanatikoff тогда перефразируй, а то никто кроме тебя не понял

    • @fanatikfanatikoff
      @fanatikfanatikoff 4 місяці тому +1

      @@user-sf2px7bg3d кто понимает о чем речь тот понял. Остальные игнорируйте.

    • @fffsolov7202
      @fffsolov7202 4 місяці тому +2

      Я понял. Видос минусуем!))

  • @kanwaraulakh4042
    @kanwaraulakh4042 2 роки тому

    Is datt a normal refrigerators compressor

  • @154rus3
    @154rus3 Рік тому +1

    Поставил комутатор от мопеда,сам комутатор высокое напряжение не выдаёт а выдаёт только импульсы для высоковольтной катушки,без высоковольтной катушки искры на свече не будет

  • @user-xi8kc5uv8t
    @user-xi8kc5uv8t 2 роки тому +4

    11:48The pressure movement is a new idea 😍👌🏼
    good luck bro♥️♥️🇸🇦

    • @drv.k5
      @drv.k5 2 роки тому +1

      🇮🇶

    • @user-xi8kc5uv8t
      @user-xi8kc5uv8t 2 роки тому +1

      @@drv.k5 🌚♥️♥️♥️♥️ منورين الحلوين

    • @drv.k5
      @drv.k5 2 роки тому

      @@user-xi8kc5uv8t حياتي انته

  • @mehdikalanaki2904
    @mehdikalanaki2904 2 роки тому

    How much power does it make?

  • @tonikileitor
    @tonikileitor 2 роки тому

    How do you do the ignition sistem?

  • @7wpollard
    @7wpollard 2 роки тому

    Does it come with a warranty though? 😆 🤣 😂

  • @LungPom
    @LungPom 2 роки тому

    What's the ignition kit?

  • @ArtCraftBanglasantu123
    @ArtCraftBanglasantu123 2 роки тому

    What the name of your welding machine? Please🙏 told.

  • @Elv383
    @Elv383 8 місяців тому

    Cadê o tempo do motor ? Como conseguiu determinar?

  • @resgatemusical.2070
    @resgatemusical.2070 Рік тому

    can it be used in a kart?

  • @mmuneer334
    @mmuneer334 2 роки тому

    Wich welding is this?

  • @user-pt1dv3jd5r
    @user-pt1dv3jd5r 7 місяців тому

    Клапана вообще отпад😂🎉

  • @marcopozzi522
    @marcopozzi522 2 роки тому +5

    I have a question... Where is the venturi effect that every carburators have?

    • @d0cktor523
      @d0cktor523 2 роки тому +6

      This engine is fake

    • @airsight2753
      @airsight2753 2 роки тому +1

      That carb is called vapor carburetor, it doesn't need venturi effect to work. But the engine was clearly fake, it doesn't have a timing gear or chain.

    • @sulaiman9766
      @sulaiman9766 Рік тому

      @@airsight2753 are u been dumb??

  • @MrRusty-fm4gb
    @MrRusty-fm4gb Рік тому

    If you you find 100 refrigerators and take the compressor out of all of them, can you make a 400-stroke engine? And would it be enough power to push a ford class aircraft carrier through the open sea?

  • @odpadleak
    @odpadleak 2 роки тому +1

    nice oscillator..

  • @arjunahatama480
    @arjunahatama480 Рік тому

    I like your videos, I'm from Vietnam

  • @TheMadMax
    @TheMadMax 2 роки тому +3

    What about using heater plug instead of spark plug?

    • @user-nb3br8sl8d
      @user-nb3br8sl8d 2 роки тому

      Как насчет работы на воде , у вас все заработает , кинокруты блять 😂😂😂😂😂

  • @ngelanturngawurchannel5465
    @ngelanturngawurchannel5465 2 роки тому +1

    Nice 👍👍

  • @furyfireff1518
    @furyfireff1518 2 роки тому

    3;00 your fingaring 😂😂

  • @darlinreyes71
    @darlinreyes71 2 роки тому +1

    Son completos me gustaría aprender

  • @user-ob1pf6yk6m
    @user-ob1pf6yk6m Рік тому +1

    спасибо, по ржал .Видео от Боливуд.🤣🤣🤣🤣

  • @clutchkikn.
    @clutchkikn. Рік тому

    Why did you weld the spark plug

  • @foxxxee
    @foxxxee 2 роки тому +8

    Какая игра боже оскар несите

    • @ordinaryperson._.
      @ordinaryperson._. 2 роки тому +2

      Го спамить ссылку этого видео ДОКТОРУ ДЬЮ

    • @ordinaryperson._.
      @ordinaryperson._. 2 роки тому +1

      Го спамить ссылку этого видео ДОКТОРУ ДЬЮ

    • @freefire-si8ew
      @freefire-si8ew 2 роки тому +2

      Го

    • @freefire-si8ew
      @freefire-si8ew 2 роки тому +1

      @@ordinaryperson._. я оставел ком в последнем видео

  • @fahimahmed-wn1jc
    @fahimahmed-wn1jc 9 місяців тому

    is it possible to make diesel engine from fridge compressor?

  • @turboshaft981
    @turboshaft981 Рік тому

    Whoa welding the plug in there,? I thought he was going to tap some threads to install the plug

  • @anonymously241
    @anonymously241 Рік тому

    What is the top speed?

  • @ArjunaXhd-ry6bj
    @ArjunaXhd-ry6bj 10 місяців тому

    does the 2 stroke exist

  • @wesleyp3024
    @wesleyp3024 2 роки тому

    thats a fine hobby engine but there are glaring issues all over the place. most of those parts should have been machined and not made out of scrap. i dont think it would last very long under sustained heavy loads.

  • @ulhassawant7700
    @ulhassawant7700 Рік тому

    This engine for how many cc we can say?would the bike be run with this engine?

    • @m4-f82
      @m4-f82 Рік тому

      Yes, you can run a jet with this

  • @vpkworkshop3685
    @vpkworkshop3685 2 роки тому

    Welding name plz ,. what is the welding

  • @rthd_vlog3729
    @rthd_vlog3729 2 роки тому +3

    Qua đến hoa kỳ luôn =))

  • @muratcoskun4498
    @muratcoskun4498 2 роки тому +6

    Amazing work

  • @Mahmoodalhaeyk
    @Mahmoodalhaeyk 2 роки тому

    you're an artist

  • @cihanyilmaz7184
    @cihanyilmaz7184 2 роки тому +3

    Otomotiv sanayisi seni neden kesfetmemis cok yazik :)

  • @user-wj7bn6jq6i
    @user-wj7bn6jq6i 2 роки тому

    I want to know how to put lubricating oil

  • @rascalcoyote6768
    @rascalcoyote6768 2 роки тому +2

    NEVER heat a magnet, if you heat a magnet specially that hot it will demagnetize

  • @TheConceptBoy
    @TheConceptBoy 2 роки тому +1

    Why not weld a threaded nut instead of welding the spark plug?

    • @holliday72889
      @holliday72889 2 роки тому

      What’s the point if it doesn’t run anyways? My guess is he didn’t have a nut that fit the spark plug laying around

  • @user-luckyBird
    @user-luckyBird 5 місяців тому

    Кому тоже стало больно от того, что он свечу приварил?
    От использования системы газораспределения?
    Ну, как игрушка на полчаса, подойдет

  • @strikersaivlogs2695
    @strikersaivlogs2695 2 роки тому +3

    How use

  • @rintheviil2159
    @rintheviil2159 2 роки тому +1

    Jio fridge se jugar bitha diya 🥶jio India

  • @raymondgacusan35
    @raymondgacusan35 2 роки тому +1

    Wow two values same direction huhu

  • @lidio222
    @lidio222 2 роки тому

    Nao entendi como esta válvulas as duas abrem e fecham ao mesmo tempo. se nos motores de 4 tempo elas tem tempo diferente? uma de admissão outra de exaustão.

    • @uvevuevue9074
      @uvevuevue9074 2 роки тому

      Thats fake,he use lets learn something sound

  • @dingdingdrongdrong2
    @dingdingdrongdrong2 Рік тому

    bạn mua mấy cái block này rẻ rẻ ở đâu vậy

  • @HiteshKumar-mk6zo
    @HiteshKumar-mk6zo 2 роки тому

    Sir ye chal kisse raha hai please bata do

  • @user-im2tk4mr6f
    @user-im2tk4mr6f Рік тому

    Хороший был компрессор

  • @NOSOK_NOSOHEK
    @NOSOK_NOSOHEK 8 місяців тому

    Подскажите какой сваркой он варит в 3:30

  • @peacefulosprey7140
    @peacefulosprey7140 Рік тому

    This man can put GM put of business

  • @masterbullshitdo
    @masterbullshitdo Рік тому

    This engine run off 220v, it can power your whole entire house + some.

  • @digeolrc8586
    @digeolrc8586 Рік тому

    spark plug in welding, difficult to replace

  • @user-lw9dk7vu4q
    @user-lw9dk7vu4q 2 роки тому +11

    Интересно 250 тысяч человек хоть подозревают что их разводят

    • @seedkls3730
      @seedkls3730 2 роки тому

      Поч?
      Edit: понял

    • @NikolayIslentev
      @NikolayIslentev 2 роки тому

      Я верил пока не увидел перепутанные трубки топливной системы.

    • @asdasdasdasd8884
      @asdasdasdasd8884 Рік тому

      Честно говоря, я 15 минут пытался понять, какого хрена он вообще работает, поскольку тут нет ни соотношения скорости грм и кшм 1:2, ни топливно-воздушной смеси. А потом зашел в комменты.

  • @thisisaweirdnameone7614
    @thisisaweirdnameone7614 Рік тому

    incredible

  • @airsight2753
    @airsight2753 2 роки тому

    You put the vapor carburetor backward LOL 😆😆.

  • @marinasouza9408
    @marinasouza9408 Рік тому

    HP???

  • @vivetuvida35
    @vivetuvida35 2 роки тому +1

    Könnte mehr auf Sicherheit achten ..
    Seine Verletzungsgefahr ist sehr hoch