Lead Welding On The Vertical. MADE EASY. (CHEAT CODE)
Вставка
- Опубліковано 4 жов 2024
- In this video I give a demonstration of how to weld lead on the vertical.
I also talk about the tools you need to perform this task.
Complete step by step guide.
I hope you enjoy. - Навчання та стиль
Videos like this will benefit so many up and coming roofers careers. Myself included, thank you for this!
I get asked for this all the time so I thought I’d make it happen. I’m going to do a series of different welding vids. All the different cuts etc.
Magic mate thé most educational video .
Now i Know what Ive done wrong.
Thank you I’m glad you’ve found the video helpful. Thanks for watching and taking the time to leave a comment.
I was always taught to stitch it from the bottom up without a rod for vertical welding. In all the years I've welded ive never tried welding top to bottom - I will have to have a go thanks for sharing.
Please let me know how you get on. Thanks for watching.
Thanks! I'm a welder and mostly weld stainless steel with Tig.
Now I have a problem with some roofing in my gutter. I'm going to go and give this a try! Thank you very much for sharing!
Your welcome. Thanks for watching.
Fair play to you for taking the time to get on and make the video you said you would, and excellent as ever 👏
Thank you and thanks for watching.
I Do the same - work down first (work with gravity) and then finesse going back up. Love your content.
Thank you and thanks for watching
I'm learning a lot from these videos.
I should start charging lol
@@slbleadworks 🤣
Ideal thanks the only problem is you make it look so easy
Sorry about that lol. I think it’s just because I’ve been doing this for so long.
Thanks Stu. Nice to see the setup up and also explained in detail how it all works.
Thank you and thanks for watching.
Takes me back to my plumbing days, when us plumbers did lead work, very tidy Stu, getting that flame spot on is an art. 👍
Thank you and thanks for watching. I get asked for this all the time so I thought I’d make it happen.
Nice video good technique, i where ever possible used to arranged the lead so i came down on an angle which made it easier even though we were taught to start at the bottom
Thank you. I’ve always found it easier coming down from the top first. But it does take longer as you’re going over it again.
From someone trying to get to grips with the dark art, very neat work and really informative Stu. Thanks for taking the time to create and post it.
Your welcome and thanks for watching.
Really interesting video stuart .i suppose getting the setting right on the gun is the key thanks for showing us
Yes you need to make sure you’ve got the flame right and it’s the right temperature.
Thanks for watching.
You make it look so easy
Thank you I think it’s just because I’ve been doing it for so long.
My last comment, your video is the most imformative lead welding video that I have seen, other videos that I have seen are no where as imformative as yours, could also suggest that some of the people making other videos don't know sh#t from clay when it comes to lead welding.
Thank you. I’m really trying to make the channel grow so I try to put as much information in as I can.
I’ve only had the channel a couple of years so I’m still learning and take everyone’s comments on board and reply to everyone.
thanks for showing how to set up and weld, i am going to have a go, you make it look easy stu
Thank you I hope your welding goes ok and thanks for watching.
Cheers Stuart, really helpful and informative 👍
Thank you and thanks for watching.
Great work 👍 It would be nice to see you weld some new and old lead maybe a repair type of scenario.
Thank you and thanks for watching.
I think I might have a vid up showing that when I was repairing an old turret.
Finally the algorithm caught up with me and I got the video I was asking for. Really well done. Would have liked a close up of the finished seam and also to see what you do with the stick in terms of motion ie side to side, circular or just dabbing? Do you not need tinted goggles for lead unlike steel? I know you mentioned goggles but I thought you meant safety ones. There’s a plethora of bricklaying videos etc. But you, my man, are unique!
Glad you’ve managed to view the vid. I was told today that it’s possible to zoom In now when watching the vids. I tested this today watching one on my iPhone. It might help show you what I’m doing.
I don’t do much with the filler rod. I just hold it close and draw off it with the torch.
With goggles I think it’s best to have tinted ones. But to be honest I’ve don’t think I’ve ever come across a lead worker that uses them.
Great video mate ! Fantastic tips
Thank you I hope it helps
An interesting method for doing a verticle weld.
Have you tried to use the side of the lead lap to make the weld instead of the lead filler rod, you may find it a lot easier and quicker. Can I suggest that you use a length of about 3mm inside diameter flexible hose about 1metre long to attach to your oxy/actylene hand piece and the blow pipe, it will give you more flexibilty and is a lot lighter if you are required to do a 10 - 15 metre continious verticle weld as I have had to do many times - it also makes it easier when you are welding verticle seams using up to 10mm thick (100kg/m2 ) lead. The flexible hose makes it a lot easier if you are required to do any over head welding. Can I also suggest that you obtain and use a rubber dresser instead of the wooden dresser, it is more efficient and does not bruise the lead - by trade I am/was a Lead Burner (Lead Welder) for thirty five years and worked in an acid manufacturing lead chamber plant, - you learn how to be very skilled and effecient when welding lead.
Hi thanks for watching. Yes I’ve tried the method of using the lap as your filling rod but for me I find it easier this way.
Also I don’t use any wooden hand tools. Although I used to own a wooden vintage bossing mallet and loved it. Sadly it broke and I’ve never found anything as good.
Really good video. Thanks 👍
Thank you. And thanks for watching.
Great video as always. Really helpful as I'm currently trying to teach myself to lead weld, thanks.
No worries thanks for watching
Exellent video mate once again 👍👊
Thank you
Excellent video so helpful it might improve my vertical welding 👍
Thank you and thanks for watching. I hope it helps.
Top stuff again,Adams gas is rent free
I've swapped acetylene for polypropylene, that burns sweet with proper nozzle.
I definitely need to look at getting my gas bottles rent free. There’s enough to pay out for🤦🏻♂️. Can you use that gas with your acetylene reg ?
@@slbleadworks no,you need propane pipes,reg,and flash backs with a multi jet nozzle.
Nice neat work, do you live next to the sea by any chance?
Thank you. What gives you that idea ?😳😂.
Yes I’m near the coast in Brighton.
Cheers for the rig setup
Your welcome. Thanks for watching.
Good job sir
Thank you
How do we get in touch with you for future projects you do beautiful work keep it up this is a great Chanel you got going here. Cheers mate.
Thank you so much and thanks for watching. You can message me on Instagram @slbleadworks
As usual ,a great educational video. I’ve been trying to perfect my welding for many years and I still struggle, especially on the vertical. Tbh I won’t even attempt for fear of burning through. I always go up on the angle. I’ve never really known what I should have my bottles set at so that’s the first thing I’ll be taking a closer look at. So thanks for that tip on setting the pressure. And I’ve always used a No. 2 nozzle. D’ya think I would fare better using a No. 3? I tend to think bigger nozzle, bigger flame and therefore less control.
And on the videos it appears the flame is feathered. Am I supposed to get the flame to be a tiny white/blue dot with no feathered flame. That’s how I’ve always thought what I’m supposed to be doing.
Just one random one here: do you weld your tapered wood roll ends or dress them? I dress them since my bossing is better than my welding but my dad always used to weld them.
Thank you I’m glad you enjoyed the vid.
I personally always use a number 3. I would suggest getting one and just see if you find it any easier.
With the flame you are after a tiny white ball. But you need to make sure it’s not to sharp as this would be more of a cutting flame.
you need to get an old paper cutting guillotine at car boot for cutting your filler rods it saves a lot of wear and tear on your hands its what i have used for 40+ years
Does it cut the lead quite thin too ?.
Omg yes I bet that saves loads of time.
Lead melts at c.a 620c - Map gas generates c.a 2k ' c... or 1200 on a bad day out - so what's the technical reasons Map gas isn't used for lead welding? Genuine question, I have no clue as to the answer as I have never welded lead - but I do weld a lot of other stuff for a living. Why not use Map? :-) Educate me & forever have gratitudes. :-)
I think the main reason is because of the cost. Propane is a cheaper alternative. I personally use Acetylene.
Are cheaper hoses heavier and less flexible?
Not that I’ve noticed.
Thanks for watching.
I’m actually itching to get on site and try replicate what I’ve learned from this video.
Thank you I hope it helps and thanks for watching.
Can you show us how to make 110mm lead slate for a pitched roof.
I’ll see what I can do in future vids. Thanks for watching.
Stu for what its worth I have just moved over to Hobby weld gas supplier because BOC cylinder rental cost have gone through the roof. With Hobby Weld you pay a one off deposit which is refunded if/when you stop using them, after that you just pay for refills.
I really need to look into this. Are the cylinders the same sort of size ?
@@slbleadworks i also looked into this the cylinders a huge, shame as the pricing is far better
Great video you mentioned where you got the model o gun but where did you get the regulators from cheers
Thank you and thanks for watching.
I can’t remember where I got them to be honest.
But if you Google victor edge regulators they will come up.
Welders warehouse sells anything and everything welding. I managed to order some nozzles that I’m hoping are gonna be better quality than a lot of the trash I’ve bought in the past. But I did notice all the Oxy/AC lead welding kits were all out of stock 8-12-22.
10:40… the sound of Brighton
Yes they was properly going for it 🤦🏻♂️😂
Flux is your friend when working with lead
I’ve never tried this.
That weld isn’t strong though. That’s why you should weld upwards instead of downwards
I did weld upwards
You need to improve the audio quality.
Yes I’ve since invested in a mic.
Please get away from boc,
They are a ripoff
Hobbyweld all day long.
I really need to look into this. Where do you get yours from ?.
@@slbleadworks
You should try Albee cylinders. You own the whole set up and just exchange your bottles for full ones.
Eltham welding supplies in Portslade would probably be your closest supplier. Oxygen is 11ltrs & acetylene is 10ltrs.
Hope that helps.
Yeh I have Albee but they’re huge. Definitely need long hoses since u ain’t dragging those bottles up behind a chimney stack. I own them. Can’t remember cost but hardly ever have to refill.
Interesting to see set up.
Thanks for watching
your audio breaks my heart 😆
I now have a mic as the audio on my iPhone wasn’t up to scratch.
Did you know you can weld with water ?
Oh really. I didn’t know this. Do you do this yourself ?
@@slbleadworks No stu but there’s a guy on here that does…..
Ken Q 👍
@@Sellmyowngranmother I’ll have to check it out