How To Fix Coolant Mixing With Engine Oil | BlueDevil Head Gasket Sealer

Поділитися
Вставка
  • Опубліковано 4 жов 2024
  • How To use BlueDevil Head Gasket Sealer | How To Fix Coolant mixing with Engine Oil in Mercedes W163 | How To Flush Coolant Milkshake From Your Car | How To Flush Oil in Coolant
    #HarjinderSidhu #FixCoolantMixingWithEngineOil #SidhuDIY #easystepsdoggies
    🙏 Shop online at Amazon - www.amazon.com...
    Any Amazon Link in my description is an affiliate link. “As an Amazon Associate, I earn from qualifying purchases.” I would greatly appreciate it if you considered supporting my channel while shopping from the Amazon store by buying anything you needed from Amazon after clicking on one of the links. This gives me a small commission at no additional cost to you and helps me continue producing more videos! Thanks a million for your support!!🙏
    BlueDevil Head Gasket Sealer- amzn.to/1kYVyzQ
    BlueDevil Radiator Flush - amzn.to/2kYddcT
    Prestone AF-KIT Flush - amzn.to/2kYkJoa
    Prestone Radiator Flush and Cleaner - amzn.to/2l9N6BN
    Heavy Duty Wheel Chocks - amzn.to/2qpRegc
    ******************* NOTICE ***************************
    THIS IS NOT A PERMANENT FIX or SOLUTION, PLEASE TAKE IT TO THE MECHANIC SHOP or REPAIR YOURSELF.
    **********************************************************
    BlueDevil Head Gasket Sealer will repair and seal leaks in blown head gaskets, warped or cracked heads, heater cores, and freeze plugs. BlueDevil is now available in a 32 oz pour-n-go size! Permanent repair for leaking head gaskets in both gas and diesel engines. Pour-n-go is designed for your customer who has limited time or is not a serious mechanic. Formulated for smaller engines, no flush or thermostat removal is required. If the radiator or overflow tank is full, drain down the anti-freeze to allow enough space for BlueDevil. Start the engine while cold and then turn the heater on max. Slowly pour BlueDevil into the radiator and replace the cap. Let idle for 50 minutes at normal operating temperature. Easy to use and provides your customer with a permanent repair! Easy to use / pour-n-go, Do-it-yourself formula Contains no solid or particulate matter that can harm a vehicle's engine No flush or thermostat removal is required.
    PLEASE SHARE THIS VIDEO! & "GIVE THIS VIDEO A THUMBS UP"
    Thank you so much for Watching and Commenting.
    PLEASE LIKE, SHARE, and SUBSCRIBE.
    My other Channels:
    1st Easy Steps - / @easysteps_sidhu
    2nd Sidhu DIY - / @sidhudiy
    3rd Easy Steps Doggies - / @sherutyson
    {This video is for educational purposes only, I am NOT a "Professional Licensed/Certified Mechanic" or "Professional Licensed/Certified Technician" and I am not liable/Responsible in any way for damages caused to YOU or your "Vehicle" or "Computer/Phone" due to this video}. Please leave your comments below if you have any questions or concerns. Hope this helps someone out there. Cheers!
    *Disclaimer: All information is for educational purposes only and is the personal view of the author.

КОМЕНТАРІ • 126

  • @EasySteps_Sidhu
    @EasySteps_Sidhu  4 роки тому +5

    I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks.
    Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌
    ua-cam.com/users/SidhuDIY

  • @ismaeljrmorales3613
    @ismaeljrmorales3613 2 роки тому +6

    This definitely worked on my 2005 Honda Accord. Two days ago I was overheating and had transmission fluid Mixed with the coolant and was leaking real bad! I couldn’t drive for 30 seconds without it going to H right away. I called my mechanic and he said I had a blown head gasket and I won’t make it no where.. I was 162 miles away from home in the hot sun over 105 degrees. I spent 100 bucks in autozone buying oil, transmission fluid, radiator cap and something else. Well I gave up and was about to pay 638.00 to have it towed home. Until my wife said, let’s spend 30 something more dollars on this head gasket sealer. I said fine why not. We poured it into the radiator. Ran the car and it went straight to H. I gave up. So while driving to the shade, out of no where, the overheating stopped. And temperature was below half. This really worked! I had thick milkshake looking oozing out of my radiator and coolant reservoir so I didn’t think it would have worked and sure enough. I drove it all the way back home, only stopping once half way home to let it cool down as I grabbed a burger! This really works!

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  2 роки тому

      Glad I could help! please share, thanks.🙏
      Thanks for the like and thanks for watching.🙏

    • @japharymagesa735
      @japharymagesa735 Рік тому

      How do you fix it

    • @dbzownz12345
      @dbzownz12345 Місяць тому

      do you know if the "pour n' go" forumula would have same effect? Also, how should i tackle this issue? I plan on draining oil/coolant. Running water into radiator & replacing the oil. Run the car for 5-10minutes to "flush" old oil/coolant out the system & then start the process of the sealer. Thoughts, any advice wold help. Thank you.

  • @marcianbullard8446
    @marcianbullard8446 3 роки тому +4

    It worked, fixed the same issue with my Chrysler 300, you have to ensure your coolant cap is functioning properly for it to work 🙏🏾

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому

      Glad you liked it! 😊 glad to help.
      Thank you so much for the like and thanks for watching.🙏

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому

      I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 ua-cam.com/users/SidhuDIY

    • @jackman5840
      @jackman5840 2 роки тому

      update on how the car is running?

  • @jregamey
    @jregamey 3 роки тому +3

    Works with coolent and cylinder blow. I didn't know it fixed oil and coolent passage. But great!!!

  • @cc92103
    @cc92103 2 роки тому +7

    For engine oil in coolant reservoir, you have to change the oil cooler, or maybe just the oil cooler gasket went bad. That's what a Merc mechanic told me today.

    • @jesus-go7us
      @jesus-go7us 2 роки тому

      This is exactly what it is I don’t think is a head gasket is a oil cooling system probably bad

    • @syedfardeensmech7254
      @syedfardeensmech7254 2 роки тому

      That’s right 😊

    • @maximolotov
      @maximolotov 2 роки тому

      i heard you can also disable oil cooler for good

    • @beingfair4154
      @beingfair4154 9 місяців тому

      how do you do that would lov to try
      it on mine ​@@maximolotov

  • @FilmPA1986
    @FilmPA1986 3 роки тому +3

    Worked for my 2002 Subaru Outback H6 3.0 from 275k miles to 309k miles, but without a thermostat installed at all. Only the thermostat gasket installed with the thermostat area cored out. Could drive up mountains, go up to 115 mph with no problems at all, like a flag finish winner this car with Blue Devil. Today and yesterday I saw coolant was coming out of my radiator cap a little bit, only knew because I saw a small amount coolant above the fan area. Thought it was the cap. Nope, the pressure was getting too intense and Blue Devil was not a permanent fix at all. I just now re-did Blue Devil with 20 minutes left of idling. Did a nice water flush about 3 times finding some oil darkening it all. Yes, oil has been getting in. It's even around the rim of the mouth of the radiator, nice goupy black residue.
    Hopefully it works out a second time around, I'm looking for a new car in the process.
    In the process of flushing I used approximately 6 1/2 gallons of pure water, should use Distilled but, I really don't care anymore.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому +1

      Thanks for sharing the info.
      This is a temporary fix and shouldn't be considered a permanent fix, and you might get lucky with a 2nd-time fix, but I don't recommend it.
      Thanks for watching.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому +1

      I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 ua-cam.com/users/SidhuDIY

  • @tjclt250r
    @tjclt250r 3 роки тому +6

    its says right on the bottle DO NOT POUR IN RESIVOIR .......you have to remove thermostat if you can...then pour blue devil directly into engine through radiator hose then reconnect hose

  • @joescott5558
    @joescott5558 10 місяців тому

    Worked for me only for 3 months just did it again today for the second time

  • @JoseLopez-nv7tg
    @JoseLopez-nv7tg Рік тому +1

    I noticed a rough idle with white smoke one morning I had to get to work I was on freeway with a huge white cloud behind me I pulled off right in front of a autoparts got 50$blue devil. This stuff only works with engine cold so I waited till morning to do it meanwhile I had coolant in oil I drained oil on my cats litter I had in trunk I added thick Lucas oil so engine can have some lubricant added more coolant and drove to work, left it at work and returned in the morning.i removed thermostat and added blue bottle following instructions and to this day that fluid remains inside its running great so far

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  Рік тому

      Thanks for sharing the info. 🙏 thanks for the visit.
      Please share, thanks.🙏
      Thanks for the like and thanks for watching.🙏

  • @pandipapamihali4522
    @pandipapamihali4522 3 роки тому +2

    I can recommend you a product. Retorque the bolts.

  • @petrdrbal10
    @petrdrbal10 7 років тому +6

    How long did it lasted ? I thought if you have oil in coolant you need to put stop leak to oil not to coolant ??? did it work ? Thanks in advance

  • @codiguy5905
    @codiguy5905 7 років тому +6

    Dis gravy is making me hungry.

    • @felsanto
      @felsanto 7 років тому

      codi guy was

  • @SuperJg31
    @SuperJg31 3 роки тому

    Cool man going to try this yea freaken coolent tank has black oil in it and i dont really want to take off the manafold and cadalic converter to get to the oil and coolent filter and replace it

  • @fuku5514
    @fuku5514 4 роки тому +2

    Like a glllaavyyy lol thanks man

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  4 роки тому +1

      lol...thanks, glad to help.
      Thank you so much for the like and thanks for watching.🙏🙌

  • @RyRyWags
    @RyRyWags 4 роки тому

    Arnold said " yellow gravy you will see coming out"! I'll be back!😎

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  4 роки тому

      lol...thanks for watching it.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  4 роки тому

      I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks.
      Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌
      ua-cam.com/users/SidhuDIY

  • @tiykeablekeller3907
    @tiykeablekeller3907 Рік тому +1

    Do you pour the blue devil in first before draining it?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  Рік тому

      Yes, then run the engine for one hour and then flush it until it runs clear.
      Thanks for watching and good luck with your DIY project.🙏

  • @biggiem13
    @biggiem13 2 роки тому

    Before u put the blue devil in do u flush the antifreeze or put blue devil then do the flush?

  • @FXLRS_CALI
    @FXLRS_CALI 3 місяці тому

    Hardest thing is not making a mess in the driveway

    • @dbzownz12345
      @dbzownz12345 Місяць тому

      go to your local parts store & do it in their driveway. Can go super early in Am before they open OR half hour aftr closing. Some close on Sunday, so can just go then & nobody will harrass you. Not even police!
      Edit: Walmart is another option...just hide in corner & go to a super Walmart with lot that can fill like 500 cars or so.

  • @Nightbird.
    @Nightbird. 5 років тому +6

    Can someone recommend a product for a head gasket that is leaking oil?
    I just don't have the $3k I was quoted for the repair. Thanks!

  • @kchilz32
    @kchilz32 7 років тому +3

    why did the head gasket go on this w163? it's very hard for a w163 to get bad head gasket unless someone didn't pay attention. especially with miles that low. a w163 can keep driving 300,000 miles if taken care of.

  • @thebeldam5823
    @thebeldam5823 2 роки тому +1

    "hopes and dreams in a can"

  • @hhhydrom3198
    @hhhydrom3198 6 років тому +4

    can I run my car while I'm trying to seal my gasket with this stuff even though Im getting water in my oil?

    • @dbzownz12345
      @dbzownz12345 Місяць тому

      do you know if the "pour n' go" forumula would have same effect? Also, how should i tackle this issue? I plan on draining oil/coolant. Running water into radiator & replacing the oil. Run the car for 5-10minutes to "flush" old oil/coolant out the system & then start the process of the sealer. Thoughts, any advice wold help. Thank you.

  • @rabnabegum576
    @rabnabegum576 Рік тому +1

    I have a Vauxhall Astra 2011. Will this work? And also is it just the engine coolant that we need to completely drain till the water is clear after we put in the blue devil or before and after?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  Рік тому

      Yes, it will work with all cars. Good question, did you watch the whole video?
      ua-cam.com/video/TnO9Q7WH2N4/v-deo.html

  • @eriklopez845
    @eriklopez845 7 років тому

    my van just did this!! so that means that my motor has water in it??

  • @TrainerTakumi
    @TrainerTakumi 7 років тому

    good video! subscribed.

  • @Toastandtea682
    @Toastandtea682 3 роки тому +1

    That's a nice mayo

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому

      LOL...thanks for watching.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому

      I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 ua-cam.com/users/SidhuDIY

    • @Toastandtea682
      @Toastandtea682 3 роки тому +1

      @@EasySteps_Sidhu ok cool I'll check it out

  • @Fiat_Racing
    @Fiat_Racing 9 місяців тому +1

    Permanent cloging cabin heater... 😂

  • @kamal62ful
    @kamal62ful 3 роки тому

    it is really work 100%

  • @yavarrogers4188
    @yavarrogers4188 2 роки тому +1

    Have a Subaru Forester 2011 and oil and water is mixing … do you reckon it’ll work ?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  2 роки тому

      It should and will be a temporary solution and not a permanent solution.
      Good luck and please share the results, thanks for watching.🙏

  • @theboos2007
    @theboos2007 8 років тому

    excuse me sir ...i have the seam problem in my s500 w220 ..are you fix it ... and my question is what is the parts dose the mechanic cheng it because i want to repair my car by me :) plz help me
    thank you

  • @agubamah
    @agubamah 7 років тому +2

    on my ml500, 2002 same milky stuff is appearing. no sign of water on the engine oil dip stick, temperature remains at 100 mark. have changed valeo and problem persists and considering changing the aluminium stuff on the front of engine near the oil cap and power driving atf pot. what could be problem?

    • @michaelolili3682
      @michaelolili3682 7 років тому +1

      Chukwuka Agubamah Have You Checked your Oil Cooler?

  • @hhhhhnnbhgg
    @hhhhhnnbhgg Рік тому +1

    I would just do one thing different put half of bottle at the end and let run again for 50 min to be on the safe side ..and leave it in the engine till next radiator flush ..

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  Рік тому

      Thanks for sharing the info. it's entirely up to you how you do it.
      Thanks for watching.🙏

  • @teamkingofbassmexicalib.c5937
    @teamkingofbassmexicalib.c5937 5 років тому

    I got no water in motor just in water reservoir will it work?

  • @blandd12
    @blandd12 3 роки тому +1

    Did this stop the oil mixing with water

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому

      Yes, it does. Thanks for watching.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому

      I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 ua-cam.com/users/SidhuDIY

    • @blandd12
      @blandd12 3 роки тому

      @@EasySteps_Sidhu was it oil cooler or head gasket leaking

  • @tiykeablekeller3907
    @tiykeablekeller3907 Рік тому

    Do you pour it in with water are antifreeze?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  Рік тому

      After pouring BlueDevil slowly, replace the radiator cap. Let the vehicle idle with CAP ON for 50 minutes maintaining normal operating temperature. After the treatment open the radiator cap as I have shown in the video keep pouring the water into the reservoir and keep flushing until it runs clear.

  • @TheMineCraft51748
    @TheMineCraft51748 8 років тому

    I have an problemm .
    I cant relply to YT comments ..
    Im using ios 8 iphone 6
    When i hit reply button . I type any thing it wont show up ( The Words what i type )

  • @chrisrios5909
    @chrisrios5909 3 роки тому

    Do i have to change my oil as well ? If so do i change it before or after putting in blue devil sealer?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому +1

      After, once it fixes the issue. Thanks for watching.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  3 роки тому +1

      I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 ua-cam.com/users/SidhuDIY

    • @ismaeljrmorales3613
      @ismaeljrmorales3613 2 роки тому +2

      You can throw it right in the radiator cool or warm. It will work

  • @Phil-D83
    @Phil-D83 8 років тому +3

    Would not use that in a ml 55amg...

    • @Phil-D83
      @Phil-D83 8 років тому

      +Easy Steps solution to put the car for sale right away... Lol

    • @aileenwagner2576
      @aileenwagner2576 6 років тому +1

      Good for you!! No not right or honest to sell car. I commend you! An honest man, thanks! And thank you for the video.

  • @aamirkhan1846
    @aamirkhan1846 7 років тому

    so u recommend it?

  • @paulklt
    @paulklt 5 років тому +3

    You had leaking oil cooler that you managed to seal with that product not head gasket. With blown head gasket you would have coolant in engine oil not other way round.

    • @hellosunshine1090
      @hellosunshine1090 5 років тому +2

      Probably not. Oil pressure is around 50 psi and coolant 13 psi so guess which normally leaks into which ?

    • @adrianamorales818
      @adrianamorales818 5 років тому +2

      I have oil in coolant,changed my radiator,I was told I needed an new one,but coolant still has oil,and my coolant leaks,have to keep putting some,any suggestions...

    • @SuperJg31
      @SuperJg31 3 роки тому

      yea i got freaken oil inside my coolent tank

    • @SuperJg31
      @SuperJg31 3 роки тому +1

      @@adrianamorales818 yea same oil is in the coolent tank saw a video on youtube saying i have to replace the coolent and oil filter pump is this what you had to do also ??

    • @TheRoadLessChosen
      @TheRoadLessChosen 2 роки тому

      @@SuperJg31 so did you change oil filter pump?

  • @pandipapamihali4522
    @pandipapamihali4522 3 роки тому +1

    I bet now that engine is dead. Because you should flush your oil also after using sodium silicate compounds like blu devil

  • @alexquezada510
    @alexquezada510 5 років тому

    I need urgent help, I have oil in my engine as well, I need to drain and change oil and after bluedevil seal do I need to change oil again?

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  5 років тому +1

      Yes, the blue devil is a temporary solution and you need to change your seals as well.
      Hope it helps, thanks for watching.

    • @alexquezada510
      @alexquezada510 5 років тому +1

      Easy Steps great thank you

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  5 років тому

      You are most welcome, glad to help.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  5 років тому

      I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks.
      Here is the link for my other channel, thanks in advance.
      ua-cam.com/users/SidhuDIY

    • @felipevalles8041
      @felipevalles8041 4 роки тому +1

      Having oil in your engine is quite normal..

  • @mikeb7345
    @mikeb7345 6 років тому +1

    "We use cantainers of bin den we dispose it deproperly" lol

  • @danjensen2261
    @danjensen2261 4 роки тому

    Can you get the blue devil on eBay

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  4 роки тому +1

      yes...I have posted online link under description.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  4 роки тому +1

      I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks.
      Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌
      ua-cam.com/users/SidhuDIY

  • @Gushers2276
    @Gushers2276 5 років тому +1

    who owns an amg but then cant afford to have a mechanic make sure it is up to shape fml.

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  5 років тому +2

      lol...thanks for watching. It's only a temprorialy fix if you are stuck out of town.

  • @muddy_redneck4483
    @muddy_redneck4483 6 років тому +3

    that shit will ruin your engine. do it right. fix the issue. these bandaids will leave you stranded at the worst time.

    • @Arz2003
      @Arz2003 6 років тому +2

      I don't mess with blue devil or those sealers because I've heard that they do worse to your vehicle

  • @dougantelman2369
    @dougantelman2369 5 років тому +1

    It’s better to just fix the engine not use blue devil. Those products can clog radiator and water passages

    • @tinagomez2415
      @tinagomez2415 5 років тому +2

      Sometimes I don't believe a word you say

  • @horizonview1850
    @horizonview1850 5 років тому +3

    It's your oil cooler gasket that's bad, not head gasket,it would be a lot worse.

  • @rubydacherry5731
    @rubydacherry5731 5 років тому

    Last time I checked an hour is 60 minutes

  • @niranjannayak6234
    @niranjannayak6234 6 років тому

    Engine dummy holed / head gasket ploblm

  • @dq2023
    @dq2023 5 років тому +2

    Mercedes shat itself

  • @adriannyasia
    @adriannyasia 6 років тому +1

    lmao

  • @ranat5526
    @ranat5526 5 років тому +3

    This is BS!!

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  5 років тому +2

      THIS IS NOT A PERMANENT FIX or SOLUTION, PLEASE TAKE IT TO THE MECHANIC SHOP or REPAIR YOURSELF.

  • @kamess6468
    @kamess6468 5 років тому +1

    Oh my god hes putting regular water in his engine... Hes gonna be needing a new engine after that new gasket

  • @pindiman7261
    @pindiman7261 4 роки тому

    Indian who wants us to think he is american😂😂

  • @cenimadreams
    @cenimadreams 6 років тому

    That stuff fuck up my engine

  • @eoinob
    @eoinob 7 років тому +5

    more like curry haha

    • @eoinob
      @eoinob 7 років тому

      the coolant is spraying out of the bottom left of my engine. coolant drops to barely anything after 30 mins of driving. any suggestions it's a 05 Rover 25

    • @supamax704
      @supamax704 7 років тому

      More like Dhal

  • @rajinikanth.g6789
    @rajinikanth.g6789 Рік тому

    Not worked don't waste your money

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  Рік тому

      The product warranty is there so you can get your refund.🤔
      Thanks for watching.🙏

  • @macdonald1790
    @macdonald1790 11 місяців тому

    AVOID THIS JUNK

    • @EasySteps_Sidhu
      @EasySteps_Sidhu  11 місяців тому

      why? it didn't work for you, you should get your refund.