00:00 - Swap Timeline and Source 00:59 - Shuffle and Swap 02:57 - Finder to Timeline 03:31 - Replace Edit 05:16 - Fit to Fill 08:24 - Trim Start - Trim End 10:36 - Extend Edit 11:34 - Match Frame 14:05 - Trim in Source 15:49 - Ripple Overwrite
@@zapvamsi8045 basically it lets you control 2 timelines at once. The source is a timeline you drag to the left source monitor. The other timeline is the destination you want to edit to. To open the destination timeline. it’s a normal double click. I have another tutorial on here that focuses more on this one technique. It’s called something like edits selects like a pro or similar. Hope this helps.
Wow! I love those shortcuts especially Trim Start/End 😍 I wasted a lot of time manually cutting using blade and moving clips to remove gaps. Thank you!
Thanks for these tips! I have been an editor for over 20 years on various NLE's and I have found in Resolve that I have become a bit of a lazy click and drag guy. I will be adding most of these tips into my workflow for sure.
Thanks, Chadwick! Discovered your channel a week or so ago…New Resolve user over here (coming from Logic Pro, FCP, Motion, etc.) and I so appreciate the video quality, your enthusiasm, educational chops, deep knowledge of shortcuts for efficient editing, and so much more. You deserve a ton of Super Thanks and I hope they come in as fast as that guy’s typing speed in your video. ;-) Best to you from Las Vegas.
Wow, thank you so much for your generosity! I would love to hear what interests you the most about Resolve, since you are transitioning from other software.
You’re welcome Peter. It is really a confusing thing when you thnk about it, especially since it’s so closely related to a match frame. Great to hear this helped.
@@CreativeVideoTips yeah. It kept nibbling away at the shot in the timeline. It seems to be a tool that could do with a few more options, for example if you could remove or disable the middle of a clip.
Me too Adam, it's such a simple concept but so powerful! I hate to say it but I probably edited for about 10 years before I learned what it was and made use of it.
I have watched this video when it first came out, it was good then but i needed to recall what to do again (because there is so much to learn.) I watched this video again this morning ( months later) and Chadwick this is Fantastic. These little gems are probably second nature to so many but for me, this is like getting in a Tesla for the first time and going for a ride.
I am impressed man! Some of them I already knew, but holy cow some of them are fantastic! Will safe this video as some others from you. And I’ve subscribed! Keep it up, you deserve it to have more subscribers!
Awesome Christian! I’m glad to hear some of these are new for ‘ya. I appreciate the sub, all my future videos for sure won’t be quite this advanced but I’m sure glad it found you with some useful new tricks. 👍🏻
@@CreativeVideoTips I don´t mind advanced tips and tricks. In fact quite the opposite. Im a proffesional based in munich/germany as well, switched from Premiere to da Vinci. It´s different but at the same time not. And im doing thing like i always did in Premiere, but as i saw there are many things i could do faster or more afficient in Da Vinci. Got my speed Editor some days ago. starting do work more with the cut page. Mulitcam is just awesome. How I won´t quite my sub anyway. :) But as I said Id me more than thankful if you will make also those advanced stuff. Also in Fusion (still confusion as an old AE user) but it is getting better.
For complete beginners like me in Resolve, is sooo useful to watch videos with tips you choose some tips because It's like some playlist witch I cant remember. And learning is so much quicker. Thaks for content
thanks for the great tips. for some reason the "shift cmd [" shortcut wasn't working for me for the trim start shortcut at 8:24, and I had to manually assign that shortcut. It is called "ripple -> start to playhead" in the keyboard customisation if anyone is looking for it.
Haha I love that dude. I appreciate the kind words, this channel does assume you have some experience editing already and I always try to cut to the chase. Thanks for watching.
@@CreativeVideoTips Awesome, that's nice to hear. I'm obviously a big fan of yours too and this video was so helpful and well done. I think the only one that I regularly use in my own workflow is ripple trim to start/end (which I mapped to 'w' and 's'), but I'm definitely going to work on incorporating the rest
Thanks a lot! I've been working professionally with the Adobe suite for 11 years and I'm on the edge of switching to Resolve for almost 2 years now. After watching your videos especially, I feel like I'm the closest to switching to Resolve ever.
Thanks, Erik - it's great to hear some of these tutorials have been helpful to understand how you can do some of the same things from Premiere over in Resolve. Some things are even easier in Resolve. I'll tell you the one thing that still has me opening premiere each week for a task is to do speech to text automatically. I hope this is something that Blackmagic eventually integrates into Resolve. But for everything else I'm much happier to use Resolve and or Final Cut depending on the project.
@@CreativeVideoTips Yeah, they really did a nice job with the whole new captions section. The old one was really bad though. The only thing that could be missing from my Premiere workflow is a quick way of replacing clips from my source window or bin by dragging with alt or alt+shift on the old clip, to keep the same clip length and attributes/effects in the timeline. What would your way to to go be in Resolve for this? I have been searching online for solutions, but I mostly find other Premiere users asking for the same question. I also really have to get use to enabling or disabling the trim mode, but that's a matter of time I suppose.
@@HaunterNL I would use replace edit for this (F11 is the default) - first mark your clip i/o with x on the timeline and then from your source hit F11 to do a "replace". In this video I talk about using replace edit mostly for sound effects syncing because that's how I mostly use it - but I'm pretty sure it will do what you are talking about with alt shift in premiere. Let me know if that's it.
5:15. Does Fit to Fill only works from Source to timeline? Can I do it from a timeline to another timeline somehow? I am editing Stacked timelines. Thank you!
Wow! Awesome video, Chadwick! I'm going to need to bookmark this video as there were so many useful shortcuts and tips there's no way I'm going to remember them all!
Hey thank you! Yes! well mostly yes. The function you want for this on the speed editor is called "MOVE". it is the secondary function under the split (add edit/razor/cut whatever you want to call it) key. The one disadvantage I've found with using "Move" and the search dial is that you can't pull groups of clips together like you can in the edit page.
Thanks again Chadwick, I appreciate your time in preparing these videos. I really have no time to look for all these shortcuts, well, to be honest I;m too lazy to go look for them since I don't know if what I am looking for actually exist on a huge list of shortcuts. You are a real time saver just like your videos my man.
No problem! One thing I do anytime I pick up new shortcuts is add it to a note (I use apple notes) - then try to add one or two new shortcuts to my muscle memory each month from that list. Before you know it, editing/grading will feel like you're just playing an instrument. Thanks for watching!
Awesome tips Chadwick, going to take some time to relearn these better workflow skills. Definitely going to help me edit faster and be more creative. Thank you for the Video👍💪
Hey thank you! Time is on your side - even if you can just pick out one little tip and use it at some point this month it should go a long ways. Thanks for watching and commenting :)
great video, thanks. Finally I know how to use ripple trim start/end, like I used to in the final cut. Trying to move to Davinci and it's such a pain :))
I'll keep going if you keep watching :). I'm just learning more each week from everyone here in the comments and I'm stoked be able to share that info.
00:00 - Swap Timeline and Source
00:59 - Shuffle and Swap
02:57 - Finder to Timeline
03:31 - Replace Edit
05:16 - Fit to Fill
08:24 - Trim Start - Trim End
10:36 - Extend Edit
11:34 - Match Frame
14:05 - Trim in Source
15:49 - Ripple Overwrite
Bro, can you explain the swap the timeline and source viewer in a simple way cause it's kind of complicated for me to understand this tip?
@@zapvamsi8045 basically it lets you control 2 timelines at once. The source is a timeline you drag to the left source monitor. The other timeline is the destination you want to edit to. To open the destination timeline. it’s a normal double click.
I have another tutorial on here that focuses more on this one technique. It’s called something like edits selects like a pro or similar.
Hope this helps.
Thanks for the quick response bro. Now I've got it. But I'm still gonna watch the video you suggestd to get in-depth knowledge about this function.
This is the most valuable DR tips video I've seen so far. Just pure gold.
Wow, thanks!
Agreed...I keep coming back to this video 😭😭
As a brand new Resolve user, this was super useful! Thank you!
same
You TRULY are THE BEST Chadwick! You have helped me become so much more efficient, and I truly appreciate it.
Wow, thanks! This is very generous. I appreciate the support and kind words.
Wow! I love those shortcuts especially Trim Start/End 😍 I wasted a lot of time manually cutting using blade and moving clips to remove gaps. Thank you!
Your tips videos always have so many gems for us newbies out here! Thank you so much for sharing the wealth of information that is in your brain!
You’re the best! Thought I would skip the intro, but I missed 1/2 of the first tip!! Tips had me glued to my seat!
There’s nothing wrong with devouring your videos, because I can always rewatch them time and again. Awesome. Thank you so much.
Thanks for these tips! I have been an editor for over 20 years on various NLE's and I have found in Resolve that I have become a bit of a lazy click and drag guy. I will be adding most of these tips into my workflow for sure.
Thanks, Chadwick! Discovered your channel a week or so ago…New Resolve user over here (coming from Logic Pro, FCP, Motion, etc.) and I so appreciate the video quality, your enthusiasm, educational chops, deep knowledge of shortcuts for efficient editing, and so much more.
You deserve a ton of Super Thanks and I hope they come in as fast as that guy’s typing speed in your video. ;-)
Best to you from Las Vegas.
Wow, thank you so much for your generosity! I would love to hear what interests you the most about Resolve, since you are transitioning from other software.
Thankyou! Trim in source viewer was something I'v never seen before. It was driving me crazy and this is the only tutorial I've found to explain it.
You’re welcome Peter. It is really a confusing thing when you thnk about it, especially since it’s so closely related to a match frame. Great to hear this helped.
@@CreativeVideoTips yeah. It kept nibbling away at the shot in the timeline. It seems to be a tool that could do with a few more options, for example if you could remove or disable the middle of a clip.
You have any videos on why you edit timeline by timeline then combine all timelines ?
EASILY Cut Dailies like a PRO! (No Mouse) DaVinci Resolve Tutorial ua-cam.com/video/bNZejqkl3AQ/v-deo.html
Match frame has legitimately changed my life. One of the best video editing features ever created.
Me too Adam, it's such a simple concept but so powerful! I hate to say it but I probably edited for about 10 years before I learned what it was and made use of it.
Amazing tips! I literally gasped when you showed extend edit command. Keep up the good work.
Thanks, I'm just switching to Resolve from FCPX and this is extremely helpful for getting up to speed.
Your tutorials are great and seriously value packed! Thanks! 🔥 Btw. I’m not far from Lake Dillon myself. 😆
You rock. Lake Dillon is great - we love to camp at Heaton Bay in the summer, so I think this was from one of those trips.
One of the best channels about DaVinci tips and tutorials. Thanks for helping
incredible video, I came here hoping to find out how to slip clips and learned multiple other useful things. Thanks a bunch!
shuffle and swap is SOOOO nice. thank you man
Pfff! Blow my mind with the first thing that you mentioned in this video. Thanks a lot!
This is great. Thanks! 🦐
I could spend all day watching and learning from your videos Chadwick. THANK YOU for all the effort you put in to your tutorials, it really shows!
You are very welcome Stephen - this is a lot of fun for me to get to hear people learning and getting more out of the tools they have available.
Man tNice tutorials is on of the best tutorial in general on youtube. Clear, simple, constant, good to listen. Thank you for sharing.
Thanks!
Thanks so much Angelo! I REALLY appreciate your support.
I need to watch this like 3 times and apply it to really absorb everything!
Great work!
Wow, thank you! This was a dense one for sure. I appreciate you Yasir.
I have watched this video when it first came out, it was good then but i needed to recall what to do again (because there is so much to learn.)
I watched this video again this morning ( months later) and Chadwick this is Fantastic.
These little gems are probably second nature to so many but for me, this is like getting in a Tesla for the first time and going for a ride.
Great tips, I love it that you are so focused on the craft of editing!
Thanks so much! 😊
Absolutely brilliant tips yet again. You are so good at explaining them clearly and most importantly, succinctly. Thank you!
Thanks for all the 'next level' tips. So much beginner stuff out there, it's good to step it up a notch.
Man this is handy af and so well done. Thank you. Im falling back in love with video editing. Long live davinci!
So dope! Hearing that you’re falling back in love with editing makes my day. Thanks so much.
Fit to fill... Gold!! New subscriber based on that alone.
Thanks for this man. Watched this twice now.
I am impressed man! Some of them I already knew, but holy cow some of them are fantastic!
Will safe this video as some others from you. And I’ve subscribed!
Keep it up, you deserve it to have more subscribers!
Awesome Christian! I’m glad to hear some of these are new for ‘ya.
I appreciate the sub, all my future videos for sure won’t be quite this advanced but I’m sure glad it found you with some useful new tricks. 👍🏻
@@CreativeVideoTips I don´t mind advanced tips and tricks. In fact quite the opposite. Im a proffesional based in munich/germany as well, switched from Premiere to da Vinci. It´s different but at the same time not. And im doing thing like i always did in Premiere, but as i saw there are many things i could do faster or more afficient in Da Vinci. Got my speed Editor some days ago. starting do work more with the cut page. Mulitcam is just awesome. How I won´t quite my sub anyway. :) But as I said Id me more than thankful if you will make also those advanced stuff. Also in Fusion (still confusion as an old AE user) but it is getting better.
Yo, that fit to fill tip is a godsend. Thx m8.
Isn't it? I need to remind myself to use it more often. Thanks for watching!
BRILLIANT!!! Thank you so much,Chad,you are a genius! LOVE your channel!!! Verina
AMAZING!! So cool to have a creator showing advanced editing techniques!!
Thanks Erik :)
Picked up some real gems in this video!! Can’t thank you enough Chadwick ⚡️
For complete beginners like me in Resolve, is sooo useful to watch videos with tips you choose some tips because It's like some playlist witch I cant remember. And learning is so much quicker. Thaks for content
Sooooo much more to learn. Thanks for the help.
Very welcome! Don't worry we all have more to learn (myself included for sure)
Nice vid, have to bookmark this one...
First tip and you already saved me a loooooot editing time! Thanks buddy!
Great to hear!
thanks for the great tips. for some reason the "shift cmd [" shortcut wasn't working for me for the trim start shortcut at 8:24, and I had to manually assign that shortcut. It is called "ripple -> start to playhead" in the keyboard customisation if anyone is looking for it.
SUPER helpful in helping me transition away from Premiere editing. All of you videos do!
Nice tips! Seriously, you're like 'Dunna Did It' for adults who actually edit. Thank you!
Haha I love that dude. I appreciate the kind words, this channel does assume you have some experience editing already and I always try to cut to the chase. Thanks for watching.
Truly Mind Blowing Tips! Thank you!
I'm new at this. You've just saved me oodles of time! Thanks, Chadwick
Glad to hear it!
This is so good. Thank you
Hey Phillip - I'm of quiet fan of your channel!! You are always reviewing the gear I'm interested in.
Thanks so much - I really appreciate it.
@@CreativeVideoTips Awesome, that's nice to hear. I'm obviously a big fan of yours too and this video was so helpful and well done. I think the only one that I regularly use in my own workflow is ripple trim to start/end (which I mapped to 'w' and 's'), but I'm definitely going to work on incorporating the rest
Thanks for the info! It’s going to make edits go by so much faster once it’s muscle memory! 🙏🏻
Thanks for yet another very helpful video 👍
Glad to help
Thanks a lot! I've been working professionally with the Adobe suite for 11 years and I'm on the edge of switching to Resolve for almost 2 years now. After watching your videos especially, I feel like I'm the closest to switching to Resolve ever.
Thanks, Erik - it's great to hear some of these tutorials have been helpful to understand how you can do some of the same things from Premiere over in Resolve. Some things are even easier in Resolve.
I'll tell you the one thing that still has me opening premiere each week for a task is to do speech to text automatically. I hope this is something that Blackmagic eventually integrates into Resolve. But for everything else I'm much happier to use Resolve and or Final Cut depending on the project.
@@CreativeVideoTips Yeah, they really did a nice job with the whole new captions section. The old one was really bad though.
The only thing that could be missing from my Premiere workflow is a quick way of replacing clips from my source window or bin by dragging with alt or alt+shift on the old clip, to keep the same clip length and attributes/effects in the timeline. What would your way to to go be in Resolve for this? I have been searching online for solutions, but I mostly find other Premiere users asking for the same question.
I also really have to get use to enabling or disabling the trim mode, but that's a matter of time I suppose.
@@HaunterNL I would use replace edit for this (F11 is the default) - first mark your clip i/o with x on the timeline and then from your source hit F11 to do a "replace". In this video I talk about using replace edit mostly for sound effects syncing because that's how I mostly use it - but I'm pretty sure it will do what you are talking about with alt shift in premiere. Let me know if that's it.
Thanks for the video bro! It would really help me edit my videos faster!
Happy to help! These are some of my favorites.
Great tips to program into the G600
Awesome, thanks so much for watching Michael.
This information is gold! Will have to watch a few times though as there is a LOT of information crammed in there! Thanks man!
Awesome dude - glad you dig it. Hopefully those timestamps will help take you to the parts you need refreshers on. Thanks for watching.
Very helpfull, I'll definitely be using these tips!
Awesome to hear, these are some of my favorites by far. Thanks for watching!
definitely diving into your videos. Thank you so much for taking the ti to teach us that are green in the field. Have a great day
Dude! Some great tips on here. Thanks!!!
Great info , Awesome channel!! All the best !
Thanks so much! and you too
Creative Video Tips also looking forward to your color page tips and tutorials!!
2mins in...MIND BLOWN. I've been a seasoned Adobe PPr Dude since 2015...this helps A LOT
5:15. Does Fit to Fill only works from Source to timeline? Can I do it from a timeline to another timeline somehow? I am editing Stacked timelines. Thank you!
Awesome tips man. Really appreciate your work 🙏🏻
Thank you - I appreciate you too!
This channel is a real goldmine! Thank you much.
Awesome tips, you earned that. Like your presentation skillset. Thanks
That is so great to hear, you are too kind. Thanks for watching.
This video is so packed of awesome tricks oO
Amazing content 🙏✨
Excellent content, Chadwick! Love it.
Earned my sub, ser. So many great tips here to help me develop an effective editor workflow. I'm linking this vid to everyone I know who edits.
this is a great video man, great video!!!
I LOVE your content man....its always helpful right away. Always. thanks so much!
Happy to help Joshua, thanks so much for watching.
Thank you so much for all the tips.. BUT CTRL+SHIFT and drag clip in time line was brilliant ! (you used the , and . on keyboard)
So many useful tips. Thank you.
Thank you! That was a great tutorial!
Wow! Awesome video, Chadwick! I'm going to need to bookmark this video as there were so many useful shortcuts and tips there's no way I'm going to remember them all!
Glad it was helpful Chris - Thanks so much for watching!
Thank you very much with your video I have learned a lot of thing that will help me to speed up my editing process. Thank you again.
Very useful tips! Is it possible to shuffle clips using the speed editor keyboard? That could be super useful!
Hey thank you! Yes! well mostly yes. The function you want for this on the speed editor is called "MOVE". it is the secondary function under the split (add edit/razor/cut whatever you want to call it) key. The one disadvantage I've found with using "Move" and the search dial is that you can't pull groups of clips together like you can in the edit page.
@@CreativeVideoTips thanks for the pointer Chadwick!
Amazing tutorial and channel man. Very helpfull, thanks 😊
Really great tips!
Glad you like them!
Some useful tips to speed up your editing ✅ Thanks!
Honestly once explained it's fairly intuitive. Thank you for breaking it down so nicely for us newbies! Can't wait to play with the full version
Thank you!
You bet!
Found your video very helpful, Thanks!
Great tips. Very helpful for someone trying to develop their techniques and work faster. Thanks.
Nice... came across your channel getting a review on the Speed Editor, but this video got me subscribed 8:18 ;)
Thank you very much i have learned one shot cut key shift v with this video
Thanks again Chadwick, I appreciate your time in preparing these videos. I really have no time to look for all these shortcuts, well, to be honest I;m too lazy to go look for them since I don't know if what I am looking for actually exist on a huge list of shortcuts. You are a real time saver just like your videos my man.
No problem! One thing I do anytime I pick up new shortcuts is add it to a note (I use apple notes) - then try to add one or two new shortcuts to my muscle memory each month from that list. Before you know it, editing/grading will feel like you're just playing an instrument. Thanks for watching!
@@CreativeVideoTips Great Tip!!!! thank you I will add this to my routine, much appreciated.
Awesome tips Chadwick, going to take some time to relearn these better workflow skills. Definitely going to help me edit faster and be more creative. Thank you for the Video👍💪
Hey thank you! Time is on your side - even if you can just pick out one little tip and use it at some point this month it should go a long ways. Thanks for watching and commenting :)
Thanks thanks thanks thanksgiving so much thankitude to you!
Mind blown. Now I have to check if these are added to my TouchPortal. Thanks!
Sick Mark! Touch Portal looks pretty great. Thanks for watching.
Excellent, thank you. Subscribed and ting!
Welcome aboard! Thanks so much.
Sooo good, you're a GOAT thanks
Glad it helped - you are super kind - Thanks for watching.
Pure gold.
beautiful.. thank you so much, love the work.
Thank you! Cheers! Hope it helps.
So much value! Thanks bro
great video, thanks. Finally I know how to use ripple trim start/end, like I used to in the final cut.
Trying to move to Davinci and it's such a pain :))
Bonissims tots els consells, sobretot el primer!!!!
Awesome video, thanks!
You make Resolve fun. Just have to play with the tips on you different videos to get them ingrained.
production. Thanks again!
Man plz keep going it's so god damn useful, I thought I'm a power user of Davinci but I was wrong!
I'll keep going if you keep watching :). I'm just learning more each week from everyone here in the comments and I'm stoked be able to share that info.
why can I not give this tutorial 100 thumbs up?! so so helpful - gracias!
SO HELPFUL!!! Thank you!
Ctrl + Shift + mouse... Dude.. U changed my life. Come to Georgia I have good red wine for you