@@kevinscampbell1974 been thinking about doing air in the front but wasn't sure about the center stand. Are they hard to find or is it more of finding the right size?
I haven't bottomed out at all. It is slightly stiffer but not at a level that is of any concern or uncomfortable. I'm sure you can make some tweaks depending on preference by experimenting with different shock oils. Hope this helps
@@dommatm4425 it's on an air ride set up, when fully dumped, probably a good 5 to 6 inch drop from stock but you can't ride at that setting, it will be a very uncomfortable ride. As far as how low can you be and still be comfortable is dependent on rider weight. I'm 5'7" and usually inflate the air ride to the point that I'm just flat footed, never measured at that point but when I park it at shows I drop it all the way. Hope that helps. Thanks for watching.
Hey, what's up Petey, it's not a particular brand, more of a mix. Check it out. www.ebay.com/itm/232623676246?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LGtLnFBQRrK&sssrc=4429486&ssuid=e3wdI4CkTFy&var=&widget_ver=artemis&media=COPY
I put the progressives in with a 2 inch lowering. Nervous to put my fender back on. But it’s so much more comfortable with it back at a more level stance after adding the 21” wheel.
@@richmolnae1453 I typically don't do step by steps but rather highlight the major points. Appreciate the feedback, what info would you say is important, always looking to better my content.
Bike is so clean!
Good info
Thanks for watching
Looking good. I thank might need to start looking at some seats . That just me
I'm wondering how comfortable those saddleman seats are with the lil back support. They look real good.
Clean bike! What was your final measurement of the pvc
Thank you. After I accounted for the cap, the PVC total size was 3/4 of an inch.
I just did dirty air fast front and rear. Heads up if your bike is 2009 and older find your center stand first . Ask me how I know 🤣
@@kevinscampbell1974 been thinking about doing air in the front but wasn't sure about the center stand. Are they hard to find or is it more of finding the right size?
@@Mikeityourself for a newer bike you can pick one up for about three 400 bucks. I’m looking at $800 for mine.
@kevinscampbell1974 man, not what I was expecting. Thanks for the heads up. I may just hold off.
How did you polish lowers
I use a combo of sandpaper, brillo pads and then polish to buff them. Got a video on the process on my road Glide. Hope it helps.
Have you had any problems with bottoming out??? Is the new kit stiffer than the previous??
I haven't bottomed out at all. It is slightly stiffer but not at a level that is of any concern or uncomfortable. I'm sure you can make some tweaks depending on preference by experimenting with different shock oils. Hope this helps
Have you had any problems of it bottoming out?
No sir, its been a pretty smooth ride.
How low is the back dropped?
@@dommatm4425 it's on an air ride set up, when fully dumped, probably a good 5 to 6 inch drop from stock but you can't ride at that setting, it will be a very uncomfortable ride. As far as how low can you be and still be comfortable is dependent on rider weight. I'm 5'7" and usually inflate the air ride to the point that I'm just flat footed, never measured at that point but when I park it at shows I drop it all the way. Hope that helps. Thanks for watching.
What rear lowering kit did you use for the rear is it just the bags or a combination? What brand?
Hey, what's up Petey, it's not a particular brand, more of a mix. Check it out. www.ebay.com/itm/232623676246?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LGtLnFBQRrK&sssrc=4429486&ssuid=e3wdI4CkTFy&var=&widget_ver=artemis&media=COPY
Any bottoming out?
None at all sir. I was wondering if I would but been all good and the ride isn't stiff.
I put the progressives in with a 2 inch lowering. Nervous to put my fender back on. But it’s so much more comfortable with it back at a more level stance after adding the 21” wheel.
Let me know how it goes
why are you skipping though half of stuff need to do snot snot
@@richmolnae1453 I typically don't do step by steps but rather highlight the major points. Appreciate the feedback, what info would you say is important, always looking to better my content.