I don't mind these guys. In this video they are working on a project that most teenagers could identify with and are teaching practical stuff that they could do with little money.
@@carpathian677 Most teenagers near me that work at fast food joints are making more than $15 per hr. A tool store who's name I won't mention here has a stud gun for $99.95. I was simply stating that this build is probably the most realistic for a young starter.
@@clintonepps3666 exactly my point. They're no more likely to own a welder or stud gun. But they could beg, buy or borrow one. These jobs were both within reach of most teenagers who know how to use their thumbs. I was responding to a smartass, negative comment.
This is the kind of thing this grown kid likes. My favorite truck is my 1986 100hp f150 My least favorite is my 2015 Duramax with full built motor and all. New trucks are kinda for chicks now days
Just because, I need to ask this for "we few that want to ask), can Spot Welds be replaced with Body Adhesive and Pop Rivits?... Probably not, but for the sake of asking "when you don't know, ask"!
Thanks Power Nation for still teaching us how to repair and build cars and not turning your shows just into commercials, like the rest of the car shows on tv.
@@bradenkowal8117 That's the trim level. Silverado was not a model name until '99. My *actual* Silverado has a badge there that says "LT", but the truck is not called an "LT", that's just the interior package. Only morons think that body style was ever a Silverado.
Mrs Richards: "I paid for a room with a view!" Basil: (pointing to the lovely view) "That is Torquay, Madam." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment ?
Fantastic, you guys want to come do mine on my '96 GMC RCSC K1500? 😅 I don't have a welder, or literally anything needed to do my cab corners or rockers, and that's all my poor truck needs to look decent 😂 Damn you North Dakota bastards who don't take care of your vehicles! (Not me, I sadly bought it like this lol)
I love short wheelbase trucks. No matter what brand or model, it's my goal to have a GIGANTIC GARAGE and fill it up with them old trucks, my retirement fund as they appreciate, and as I appreciate them!
I would love to see carcass put a turbo 4.0L straight 6 in the postal jeep. Let engine power build a high performance engine 4.0L with a turbo. That would be awesome 👌 👏 👍 😍 💖
Really like your work on the cab corner of the Silverado..I have a2015 gmc serria with the very early stages with the paint chipping away.. an unfortunately I have to pay someone hopefully as good as you to do my repairs ..an I’m just wondering to do both sides if you can give me a ball park figure of what it’ll coast…????
Couple things. What has been done, if anything, to mitigate moisture getting right back in there, and starting the whole rust cycle from repeating? Now, there is some fresh bare steel, at the joint, inside, ready to start oxidation. There are some products that could be used, but nothing is ever shown to prevent rust from coming back. Any ideas?
you guys need a 2 post hoist common man , love the OBS though .I still drive my 1991 GMC single cab short box , its on propane and gasoline here in Alberta Canada.
@@mattfogarty8144 it's just a 90° nothing crazy or crazy bends. I've made more difficult panels in an apartment parking lot with a hammer and vice than that.
Follow POWERNATION Everywhere:
www.powernationtv.com
instagram.com/powernationtv/
facebook.com/PowerNationTV
tiktok.com/@powernationtv
miss kevin tietz when rust repair videos are coming out
I don't mind these guys. In this video they are working on a project that most teenagers could identify with and are teaching practical stuff that they could do with little money.
Yeah a stud gun is in every teenagers toolbox......
@@carpathian677 Most teenagers near me that work at fast food joints are making more than $15 per hr. A tool store who's name I won't mention here has a stud gun for $99.95. I was simply stating that this build is probably the most realistic for a young starter.
@@carpathian677 Most teenagers won't have a welder either, they'd have to beg, buy or borrow. So what's your point?
@@clintonepps3666 exactly my point. They're no more likely to own a welder or stud gun. But they could beg, buy or borrow one. These jobs were both within reach of most teenagers who know how to use their thumbs. I was responding to a smartass, negative comment.
This is the kind of thing this grown kid likes.
My favorite truck is my 1986 100hp f150
My least favorite is my 2015 Duramax with full built motor and all.
New trucks are kinda for chicks now days
I love it when they do projects like this, stuff that almost anyone could do. I also love that they are resurrecting a obs chev.
Thank u to carcass for keeping this episode to show how u can fix a normal car or truck
This is actually very useful for the weekend guy
Just because, I need to ask this for "we few that want to ask), can Spot Welds be replaced with Body Adhesive and Pop Rivits?...
Probably not, but for the sake of asking "when you don't know, ask"!
Thanks Power Nation for still teaching us how to repair and build cars and not turning your shows just into commercials, like the rest of the car shows on tv.
Yesssss! An obs restore job. Cnt wait for the update.
Why no weld thru primer?
And old rusted out chevy...looks like new again !
Thank God carcass is back. Great body work guys
LMC truck actually does sell inner cab corners. So you can replace them if needed.
Great examples of DIY work
That is *NOT* a "Silverado".
Uhhh yes it is....even the factory badge on the side says silverado......
@@bradenkowal8117 That's the trim level. Silverado was not a model name until '99. My *actual* Silverado has a badge there that says "LT", but the truck is not called an "LT", that's just the interior package.
Only morons think that body style was ever a Silverado.
And? They are calling it what it is 🤣🤣 who cares 🤦🏻♂️🤦🏻♂️
chevys rust, fords break down and Dodges get the job done.
Mrs Richards: "I paid for a room with a view!"
Basil: (pointing to the lovely view) "That is Torquay, Madam."
Mrs Richards: "It's not good enough!"
Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..."
Mrs Richards: "Don't be silly! I expect to be able to see the sea!"
Basil: "You can see the sea, it's over there between the land and the sky."
Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction."
Basil: "Why?! Because Krakatoa's not erupting at the moment ?
Fantastic, you guys want to come do mine on my '96 GMC RCSC K1500? 😅
I don't have a welder, or literally anything needed to do my cab corners or rockers, and that's all my poor truck needs to look decent 😂
Damn you North Dakota bastards who don't take care of your vehicles! (Not me, I sadly bought it like this lol)
Need to know WHAT is wrong with MY 02 jeep liberty sport 3.7 v6 would love TO see if you can trob shoot and diagnose GET ME BACK ON THE ROAD
Respecfully, it took me WAY WAY WAY longer to remove my truck bed bolts lol, I even used pneumatic tools LOLOL
I have your next project 3 door pickups,, double your fun,,, S10 extreme pickups.....
Great show, guys, but I really wish you would wear protective gear when sanding. Ask anyone with COPD.
Great content.
Thanks
Jeremy grinding in the direction of the gas tank, kind of dangerous. I would of put a blanket over the filler neck.
Yeah, you should have fixed the inner cab corner.
How can a home type Mach? get all this type of Matco tools like you used at a lower price.??? Matco is too much money.
Shouldn't weld in a continuous line. Move around and let the heat disapate. I was told to weld body panels like you tighten lug nuts
Yeah my first cab corner job turned into splicing speaker wires back together
Trying to watch these in order is like going down a rabbit hole on UA-cam
That black Chevy didn't have to be so cool in the intro lol
I love short wheelbase trucks. No matter what brand or model, it's my goal to have a GIGANTIC GARAGE and fill it up with them old trucks, my retirement fund as they appreciate, and as I appreciate them!
I would love to see carcass put a turbo 4.0L straight 6 in the postal jeep. Let engine power build a high performance engine 4.0L with a turbo. That would be awesome 👌 👏 👍 😍 💖
Do a 1990 dodge d250 gasoline 5.9l v8
Really like your work on the cab corner of the Silverado..I have a2015 gmc serria with the very early stages with the paint chipping away.. an unfortunately I have to pay someone hopefully as good as you to do my repairs ..an I’m just wondering to do both sides if you can give me a ball park figure of what it’ll coast…????
Very Cool...
Nice Choice of Truck...
Couple things. What has been done, if anything, to mitigate moisture getting right back in there, and starting the whole rust cycle from repeating? Now, there is some fresh bare steel, at the joint, inside, ready to start oxidation. There are some products that could be used, but nothing is ever shown to prevent rust from coming back. Any ideas?
This is my kind of diy. 👍
OBS? Try buying parts from the OBS dealer only using that acronym. 1996 c1500 for those of us who like to think.
Tell the stealership parts dept ya got a GMT400
Great! The Nitty Gritty of the Rusty Crusties.
I bet they can't make that truck as new again 🤣
you guys need a 2 post hoist common man , love the OBS though .I still drive my 1991 GMC single cab short box , its on propane and gasoline here in Alberta Canada.
They have one, it's right in front of the truck
@@bradenkowal8117 oh my bad
Abandoned... do you have a title?
He said abandoned project, as in someone was going to work on it and didn't get around to it
nice video
😎🖖✌👍👌🤓
😍✨🔥❤️
thats half ass, that inside corner would have been easy to make.
Agreed 100%
@@mattfogarty8144 it's just a 90° nothing crazy or crazy bends. I've made more difficult panels in an apartment parking lot with a hammer and vice than that.
Have a cry mate. It was irrelevant to the two repairs they made the video to showcase. Happy now you got that attention you wanted?
2nd
1st
👍👍🇺🇲 Lgb
I want more videos on this rig she's minty