Man, I am impressed with the work you can do with the tools you've made :3 Really leaves me with no excuse to start doing cool stuff too - if I don't have the tools, I should just make them. =) Great work!
you are by far the most talented man doing this PCB, I'm amazed with the final result, and your tools are from another world, I never would imagine to use a old PC fan to do a vibrator. 👏👏👏👏
Everyone agrees that your work is incredible! I'm at a similar place with my diy work in terms of tool availability, inspired by your ingenuity in making your own tools.
Finished products ua-cam.com/video/ksk0an3RUfQ/v-deo.html I rarely use multi-purpose PCB. I usually make PCB from copper plate. It is beautiful, and works stably. Many team members often ask me how to make perfect PCB at home, so Today's video I will show you how to create perfect PCB from copper plate. Facebook group : bit.ly/CreativeElectronic #Inverter #12Vto220V #PCB
I have always used the glossy paper (not the same as you) but everytime failed to transfer the toner ink fully on the copper plate. Any suggestions? Does it have to do with the paper or the time and amount of heat applied during pressing it with iron. Please help
Sir ac line 220v se 6 run chaser ki gerber file mil jyegi kya . jisme 14 pin ki ic lagi hoti hai wo walior output pr 6 transistor pcr406 lage hote hai. Us circuit me ic ka no. Nhi mil raha hai kahi pr bhi
hello i have found 3 types of copper clad board - 1 standard - 2 photo sensitive - 3 pre-sensitized photo sensitive and im asking which do i need to get the same results as u did in your video?
Awesome, interesting technique! That drill press is just amazing. It is so sad to see people who cry that they need to buy all these tools to be productive, when I should have been thinking of ingenious was to improvise my whole life. #ono
Yeah. Do you know what it costs to buy a little drill press for this purpose? It's unjustified. So I got a ~$20 drill press stand (for hand drills) and a ~$10 hobby motor that came with a chuck and bits, and I was rolling with a $30 PCB drill press, give or take a bit. The things that I already had though were pieces of rubber to make a spacer because the clamp on the drill press stand was too big, and a 12V DC power supply to power it.
In China, we always prototype the two layers PCB with less than 1$ to manufacturer, after 24 hours PCB will be ready for delivery from manufacturer, about total 36 hours later we can get the PCBs in hand.
You could make pcbs for free but one thing that maintain people to still making pcbs at home is the shipping time and cost of the shipping is not the pcb price is the shipping. If you live out of china there is always a significant amount of time to wait until the pcb arrives , those times can be at least 1 month for america or one week but with a shipping cost of 30-50usd. If you can send me pcb's with one week $10usd shipping I'm yours.
Hello, i'm wondering how do you printing with laser printer on inkjet paper? I think this type of paper is only for inkjet printers. Can you damage your laser printer?
I don't say this very often but the use of all of your tools borders on the creepy and I can't put my finger on why.. altogether, this was a very informative and intersting watch.
Until today, I thought that the circuits were filaments carefully printed into the plaque, now I know they print everything but the circuits, thank you
Ironing your PCB on Borland C++ 3.x notes! I thought I'd be in the US for 3 years but ended up being away for 25. Last year, I finally got back to find the things I'd left behind waiting for me - including Borland C++ v3.1 for DOS on 3.5" floppy disks!
Very nice work... excellent result. You might consider spraying the component side with a coat of white paint just before you transfer the component layout (step 8). This would allow the print to show up more clearly. But the result is excellent regardless. >Charlie
@@PhdHung i have found 3 types of copper clad board - 1 standard - 2 photo sensitive - 3 pre-sensitized photo sensitive and im asking which do i need to get the same results as u did in your video?
Please help. After ironing, i find it difficult to remove the paper from the copper plate easily. It sticks so hard to the copper plate and even if the paper comes off, i will still have a very thin layer of paper on the copper.
Must use Laser Printer for transfer. Laser Printer prints with plastic toner powder(not ink), that can be transferred to copper PCB with heated iron. If you don't have a laser printer, you can have printed by local print shop of your choice, like Kinkos, FedEx, or at your workplace. Most large large copy machines use Toner/Laser Printer inside for making copies. If you can print with inkjet at home, then you can have copies made on a copy machine that uses toner/Laser printer for making copies.
This is real diy, but I don't understand why you not processed on reverse side as you did for other side? Wil it not be washed out as it's only printed ink
Love the ghetto setup :D Thank you so much for this. I hate it when someone states "at home" and uses machines that cost tens of thousands of dollars. As if we all have that much money to spend. -_-
Make PCB 2 layer perfect at home
ua-cam.com/video/4TQP8G41Yow/v-deo.html
What is the model of your printer?
Are you Vietnamese?
@@trankhacquyet23: Homemade "102" => có 1 không 2 => chỉ có người VN mới chơi chữ kiểu số này :D
Deleted... Bro
Your tools and stuff make me feel like I'm watching an apocalyptic movie.
:D
Well in some places that would not be to far off..
He's resourceful, I guess...
And that's a good quality to have perhaps.
A man's got to work with what he has ❤️
P.S: Beggars can't be choosers.🤷♂️
Very clever drill press design!
thanks
Get rid of the constant bell rings ... once is enough ... esp. when there is not much other audio
Yes, I will lower the volume
He made this in a cave, with a box of scraps!
Iron man references on point
It make me smiles
Man, I am impressed with the work you can do with the tools you've made :3 Really leaves me with no excuse to start doing cool stuff too - if I don't have the tools, I should just make them. =) Great work!
Thank you, this is mini PCB drilling machine ua-cam.com/video/-jVms_y1N7I/v-deo.html
you are by far the most talented man doing this PCB, I'm amazed with the final result, and your tools are from another world, I never would imagine to use a old PC fan to do a vibrator. 👏👏👏👏
Great, the PCB, the drill, the simplicity, every things :)
thanks bro
Everyone agrees that your work is incredible! I'm at a similar place with my diy work in terms of tool availability, inspired by your ingenuity in making your own tools.
Wonderful creation. Great lesson on pcb manufacturing.
So wonderful, in my company has many claim PCB to supplier. Your PCB very beautiful. Thank you for share.
thanks
Everybody is gangsta till this guy shows up with his drill press
Finished products ua-cam.com/video/ksk0an3RUfQ/v-deo.html
I rarely use multi-purpose PCB. I usually make PCB from copper plate. It is beautiful, and works stably. Many team members often ask me how to make perfect PCB at home, so Today's video I will show you how to create perfect PCB from copper plate.
Facebook group : bit.ly/CreativeElectronic
#Inverter
#12Vto220V
#PCB
Thank you very much.....
thanks
I have always used the glossy paper (not the same as you) but everytime failed to transfer the toner ink fully on the copper plate. Any suggestions? Does it have to do with the paper or the time and amount of heat applied during pressing it with iron. Please help
@@PhdHung I liked the video what was the rock you shaved off and mixed with the gasoline to make the terpentine ? Thanks
Page from Borland C++ 3.x manual ... brings back old memories.
Yes, about 20 years ago :)
I wonder about the turpentine solution, is it really effective like a varnish ? No issues with soldering after ? Is it not flamable ?
im a CNC engineer yeah its amazing that you can make holes manually but i wonder what will you do if this is a double sided PCB
You ae the champ buddy, great job👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻
Nicely done....but would you pls let us know what is that brown colored rock like thing u r scraping and mixing with gasoline to protect the pcb
resin of the pine tree.
Sir ac line 220v se 6 run chaser ki gerber file mil jyegi kya . jisme 14 pin ki ic lagi hoti hai wo walior output pr 6 transistor pcr406 lage hote hai. Us circuit me ic ka no. Nhi mil raha hai kahi pr bhi
I have a doubt, what is used for making turpentine solution and what is used for finally component side polishing??
at the end of the video, just the water.
I can’t understand nothing here but I still found this very satisfying
wow... best tutorial ever watch....!!!
Thanks
hello i have found 3 types of copper clad board - 1 standard - 2 photo sensitive - 3 pre-sensitized photo sensitive and im asking which do i need to get the same results as u did in your video?
Just need copper clad board :D
Awesome, interesting technique! That drill press is just amazing. It is so sad to see people who cry that they need to buy all these tools to be productive, when I should have been thinking of ingenious was to improvise my whole life.
#ono
I do the same tricks for pcbs awesome awesome
rocky runner great. It’s nice to keep making your own tools if you don’t have any. keep up good work.
Yeah. Do you know what it costs to buy a little drill press for this purpose? It's unjustified. So I got a ~$20 drill press stand (for hand drills) and a ~$10 hobby motor that came with a chuck and bits, and I was rolling with a $30 PCB drill press, give or take a bit. The things that I already had though were pieces of rubber to make a spacer because the clamp on the drill press stand was too big, and a 12V DC power supply to power it.
Very impressed by the Drill press 😍
i love you brother and your al of work. you are really king.
Thanks, hope you enjoy it
Мега-чувак!
эклектика эпох и технологий.
ЛУТ)
so that is how and where they make Iphones.
you're really funny :))
Do the paper prints have to be used imediatly after printing or can u give a time pls ? thank u for video it is good
Can be used immediately or after a few days. Quality does not change.
@@PhdHung thank you good man very helpful and clear video aswell
this fan was thougt so wisely, nice vibration mahine.
Thanks
In China, we always prototype the two layers PCB with less than 1$ to manufacturer, after 24 hours PCB will be ready for delivery from manufacturer, about total 36 hours later we can get the PCBs in hand.
yes, i usually hire factory to do pcb in bulk, but when doing pcb test. I usually do it myself.
You could make pcbs for free but one thing that maintain people to still making pcbs at home is the shipping time and cost of the shipping is not the pcb price is the shipping. If you live out of china there is always a significant amount of time to wait until the pcb arrives , those times can be at least 1 month for america or one week but with a shipping cost of 30-50usd. If you can send me pcb's with one week $10usd shipping I'm yours.
Also pcbs larger than 100×100mm can get pricey
Hi,What kind of paper is used for printing, and what is the name of the application used to draw the electrical circuit? Thank you
Is it possible to make solder mask at home?
Yes, of course. It's quite simple, next time, I'll do it
very nice..... your work approved that you are a real master.
Thanks, hope you enjoy it
@@PhdHung yes, of course.....
Ive been thinking to reserve one motorcycle battery too for home use. Btw how long will it lasts.? Say like ur own normal usage.
Normally, motorcycle battery 12V - 6Ah. If you use it to charge your phone, it can work for 5 hours.
Pls help with the tutorial to make the drilling machine. Thanks
Hey! What kind of printer are you using? Laser or injection? Is it important? Nice video! Thank you!
I use glossy paper and laser printer
@@PhdHung nice, is there a way to do it with injection printer??
Excellent workmanship
Dialog would be nice.. For DIY homemade though it looks better than most I have seen on here which look like PCBs from the 1960's
:D
Hello, i'm wondering how do you printing with laser printer on inkjet paper? I think this type of paper is only for inkjet printers. Can you damage your laser printer?
don't worry, it still works fine with lasser printer
Awesome work!! , will this board require solder mask layer ... Please let us know..
This is use Laser printer or inject printer ? Thanks
Laser
If use inject printer work or not ?
Finished products ua-cam.com/video/ksk0an3RUfQ/v-deo.html
1500W inverter
well thanks for sharing!!!
really appreciated!!!
:D
Excellent work ... You're smart boy 👌👌🌹🌹🌹👍 thanks...✅
I'm afraid to connect the CPU fan to the battery next to gasoline.
booommmmm :D
You haven't LIVED Life fully then..
@@Elfnetdesigns true
Witch software use for design circuit plz send me this software link
i use eagle 6.6
I don't say this very often but the use of all of your tools borders on the creepy and I can't put my finger on why.. altogether, this was a very informative and intersting watch.
Finally, a use for all my old, broken computer fans! - McGyver would be proud :-)
Can I wash out the ink with acetone? thank you!
ok bro
مرحبا أستاذ اشكرك على جهودك وقناتك حلوه مفيده أستاذ اني سويت نفسكم بطباعه لوحه PSB بس مشكلا ما يطلع نفس خارطكم من طباعه تكدر كولي لوزحمه اشكرك
wow very nice..thank you so much...for tutorial
thanks
Sir क्या आप मेरे लिए एक gerber फ़ाइल से दो डबल लेयर pcb बना सकते है, अगर हां तो चार्जेज बताएँ
I'm more impressed by your tools than the PCB.
Yes, thank you very much
How many minutes time do you need to iron the pcb?
~ 3 min bro. max temp
I made already...and the layout can't trasfer very perfect...always miss some layout..do you have any solution for that??
Until today, I thought that the circuits were filaments carefully printed into the plaque, now I know they print everything but the circuits, thank you
Very detailed and well captured. Thanks mate and well done!
I find myself wondering if you can make a PCB motherboard with the power of a motherboard in a gaming computer... is that possible?
hahaha, wait for me to buy gigabyte or Asus :))
@@PhdHung Sorry, I don't understand your comment, is that a yes or no? Are you saying you can copy it after you buy it?
Ironing your PCB on Borland C++ 3.x notes! I thought I'd be in the US for 3 years but ended up being away for 25. Last year, I finally got back to find the things I'd left behind waiting for me - including Borland C++ v3.1 for DOS on 3.5" floppy disks!
Yes, it was the first programming book I learned 15 years ago, I still keep.
Sir which material you add in turpentine solution for protection purpose
others : "upload your gerber files"
Homemade 102 : "print your gerber files"
I uploaded it to the group
Gasoline, turpentine,feC13.. ye sab hardware k shop se milega ?
Which cartridge are you using, new or refilled? What print settings do you set for your printer?
What is the material used on the table like some graphs may I know what is it and it's importance?
wow...im impressed man...good job
Thanks
Muito bom! Qual o soft que voce usou para fazer o PCB?
i use eagle 6.6
Provide the link of that stone which is used for protection of pcb copper
I bought it at the store, it's a pine resin concentrate. You can use flux solution to replace it.
@@PhdHung thanks a lot keep helping
Which printer..will inkjet printer work ??
No, need a laser printer
Very nice work... excellent result. You might consider spraying the component side with a coat of white paint just before you transfer the component layout (step 8). This would allow the print to show up more clearly. But the result is excellent regardless. >Charlie
Or you can order it...
Great video!
Thanks
Please which ink should I use for the printing
Hey there
I have a question here, if someone who doesn't know how to make pcb or design the somatic. How much would you charge a person for one board.
Hello, this is an inkjet or laser printer ? thanks
very creative, if someone gave you $1000 you could turn it into a million
lol
Hi sir! Did you use an inkjet printer or a laser one? Thanks
i use LBP2900. Laser printer
What is the name of that stone you mix with gasoline for protection of pcb
It is the sap of a pine tree
@@PhdHung you are awesome bro.. 👍
Thank you so much.
Great job. Wait for double side PCB.
ok, wait me
@@PhdHung Great. Thank you.
So this is a single layer PCB board? Can I make two layer ones with this method?
of course.
Dear which printer is best Laser jet oR Inkjet
Como se llama el papel q usas para transferir?? :)
i use glossy paper
Maybe I will use a file printing service such as stickers ( I will use photoresist film).
yes
Thanks for the step by step PCB making. Your designs were great!
thanks bro
All Good ...Thanks For Everything
What happened to the rest of the copper when the circuit diagram is placed on the copper plate
It was dissolved. Cu + 2FeCl3 = 2FeCl2 + CuCl2
Can use inkjet printer?
no bro. need laser pr
@@PhdHung OkOk thank's 👍
does the pcb have to be positive pre sensitized , or Photo sensitive , or can be standard
Sorry . I don't understand. what do you mean?.
@@PhdHung i have found 3 types of copper clad board - 1 standard - 2 photo sensitive - 3 pre-sensitized photo sensitive and im asking which do i need to get the same results as u did in your video?
Nice work buddy keep it up
Colour inkjet paper kaha se le ya link do buy karne ke liye
Please help. After ironing, i find it difficult to remove the paper from the copper plate easily. It sticks so hard to the copper plate and even if the paper comes off, i will still have a very thin layer of paper on the copper.
Mạch in quá đẹp , bửa nào đặt mạch in có làm k ?
tất nhiên là không rồi. đặt mạch nhà máy giờ rẻ bèo. 150K / 10PCB.
In nhà máy tốt hơn bạn ơi
Amazing job, great quality
@6:30. Amazing transfer! And that’s just any old inkjet ink?? And that unbalanced fan for agitation. Effing ingenious!!
Must use Laser Printer for transfer.
Laser Printer prints with plastic toner powder(not ink), that can be transferred to copper PCB with heated iron.
If you don't have a laser printer, you can have printed by local print shop of your choice, like Kinkos, FedEx, or at your workplace.
Most large large copy machines use Toner/Laser Printer inside for making copies.
If you can print with inkjet at home, then you can have copies made on a copy machine that uses toner/Laser printer for making copies.
xmrtuvgs my bad, I must not have typed what I was thinking, LOL! Years ago, I bought a somewhat cheap High-res Samsung printer for this purpose.
This is real diy, but I don't understand why you not processed on reverse side as you did for other side? Wil it not be washed out as it's only printed ink
Love the ghetto setup :D Thank you so much for this. I hate it when someone states "at home" and uses machines that cost tens of thousands of dollars. As if we all have that much money to spend. -_-
Thanks for watching
"wear your gloves" you should listen .... feels like your are leveling up your tech tree in a survival game but it's also so nice congrats!
How do you cut the pcb? box cutter?
I really like your drill press table, which motor did u use ?
here ua-cam.com/video/-jVms_y1N7I/v-deo.html
Which printer using Inkjet or other
where can we find ferric chloride lumps
I bought it at the store, very easily
Nice work
Thanks bro.