Rival MT10 - Initial Review and Hardcore Testing - Team Associated
Вставка
- Опубліковано 16 вер 2024
- ✅Buy this truck (this version 2 comes with a different body): amzn.to/3GWf9ON
✅Battery kit we used in this video: amzn.to/3lNfcRg
This 1/10 scale truck is a new happy installment into our fleet. We don’t hold back on this thing and what it does with itself is rather impressive!
Music from Uppbeat (free for Creators!):
uppbeat.io/t/s...
License code: XMEQWEAD2AOLAD31
Music from Uppbeat (free for Creators!):
uppbeat.io/t/s...
License code: XMEQWEAD2AOLAD31
Music from Uppbeat (free for Creators!):
uppbeat.io/t/a...
License code: B60RJOYAHPASNL5U
Music from Uppbeat (free for Creators!):
uppbeat.io/t/t...
License code: SIZQGK238J1CSB8W
Dude I literally just got mine about a week ago and I'm soo happy that I did. When you first take it out it feels cheap, BUT it's anything and everything but cheap. Now im Skatepark bashing as we speak 🤘🏾💪🏾
I agree it sounds cheap when it lands, but definitely holds up!!
@@DerbyCityRC I've bent screws that hold the skid plates, shock towers and shocks in place. Yeah, the screws have bent but the plastics are fine. It's always a WTF moment when you do maintenance and a screw comes out looking like a banana. So yeah, the plastics it hold up to absolute hell:D
I’d believe it! One of the most durable RCs I have for sure!! I’m sure I’ve got a few banana’d screws too lol
Great video Evan! Wheelies won’t be a problem on 3s, and you’ll get your back flips too! Mine didn’t seem to heat up on 3s though. Used a 2200 3s 50c. And 39mph!I didn’t run with the “sock” on it either! Either way, in my mind, this is one of the best built mid budget trucks out there! Like you said, it’s a beast!
Awesome bash session as always fellas! 🔥🔥🔥💪🏼😃🍻
Thanks Robby!! Ya and I also have a feeling maybe the gear mesh was tight from the factory. I’ve ran it once since and it didn’t seem to get as hot, however I had that heat sink on there and it was much cooler the next day lol definitely looking fire to trying 3s!!
Thanks again!! 😎🤘😱👍
Yeah the stock motors really could use a fan.
I threw a highspeed NHX fan on mine an it helped tremendously when I was running it stock. Even kept it cool enough to go up 1-2t on the pinion. I also stopped using the hair net on it too. It just became more of a hassle for me.
Ya I may get a fan set up. The heat sink seemed to help the second time I had it out. I agree the hair net is a pain. I rarely run through anything that would warrant using it anyway. Good to have for wet nasty locations though 👍👍
One of my favorite rigs and what a performer! The only problem I had was the weak servo and server horn.
Definitely a fun truck!! I’ve also found the servo saver is loose causing the weaker turning as well.
@@DerbyCityRCyou using battery 3s?
Those JLB Cheetah wheelie bar wheels and bolt go right on the MT10. That's what I use and it does standing wheelies forever.
Good to know!!
Being that the cheetah wheelie bar is worthless 🤣🤣
Thanks🤘
Got this beast yesterday running it on 3s,wheelie bar has snapped and front left wheel fell off,lost the nut,washer,and hub cap,only run it on grass and road outside my house. easy things to fix,absolutely crazy machine 😜
Awesome!! I actually ran it on 3s for the first time today!
I lost a couple wheel nuts too but luckily was able to retrieve them. The. My battery flew out and it was at like 50% power after that. Need to figure that one out. But wow I couldn’t believe how fast she was!!super fun truck!!
Hi man! Mad respect for all your content, super fun and so informative. I really like this rc and I’m traveling soon to USA and I’ll get one of this, only thing I’m not sure is about the LiPo batteries, they seem to be not very liked in airplanes. I was wondering if you could please lend me a hand on how should I transport this truck and the batteries so I have no issues with custom clearance back in my country (Colombia) thanks a lot!!!
Check all 3 diffs. I was going to up my weights but found all 3 empty. Put recommended in front and back then 60k in center. It’s awesome now. Only wheelie on command 👍
Awesome, I’ll do that. Thanks!
Hey man, I was wondering what motor heatsink can size for my own mt10.
Thanks,
waiting for the 3S video, I actually seeing this video after I already decided to buy this truck. cool bashing, Can hardly tell its 2S. 3S will be interesting.
I’ll be working on that one soon! Ya it was super fun. Hope you like it too!
Love this video. No BS. You got yourself a new subscriber! 👍🏻😃
Thanks bro!! 🤘😎👍 😃
This has been my "one day... ill get one". Great video, look forward to updates. I have a few hsp 1/10 projects, i was suprised to hear your motor and esc was getting hot just on 2s... i have literally this exact setup in my wolverine but havent tested yet, now i wonder if the 60amp/3650 is going to be undersized... look forward to the 3s run and how hot it gets, thanks for all your videos and your feedback 😁
Thanks! Yes it’s definitely worth it once you can swing it.
I also wonder if my mesh was tight from the factory. It definitely got worse after using it for a bit, but may have still been tight before hand. Plus I was pretty much full throttle non stop. Lol!
You’re very welcome and glad
You like the videos! Thanks for always having great comments! 🤘😎👍
Yep I agree. This is definitely my top wishlist RC.
Definitely a good one!
Nice bash video showing what the MT-10 can take. Cheers mate!
Thanks man! Definitely a fun truck!!
Oh yeeaah
Challenge for you: try to break it so it doesn't drive 😁
Lol! Likely will happen eventually, but that’s about as hard as I could go on 2s, which was super fun!!
That really takes a Derby City BEATING!!!! 😳 😉
🤣Haha! Yes it does!! 🤘😎👍
i ran it 3s out the box and no problems with motor heat.
Sweet!!!
the kid " It doesn't even hit the sassy" 😂
lol such a silly kid. He knows his stuff!
Nice bash test mate, good stuff 👍🏼
Thanks!
I keep being tempted to buy this truck. But the I see the associated sct 4pro 10 and get stuck deciding. I would just get both but my channel still has a long way to go hahahaha. They seem to have some similarly to arrma in the placement and organizing of the lay out.
I know decisions can be tough! Lol definitely happy with this choice so far!
Rek RC 👋. Hot one today . Stay cool .
Very very nice... and opinions rival MT8 ? Thanks
Thanks!
I don’t have an MT8 yet. I’m thinking about getting one eventually. They seem like they don’t hold up as well due to the extra weight. Will probably try a beefier electric system on the mt10 first!
Geez man, no mercy on a new rc lol. Wild abuse bash! Cool vid brother
Lol yup. She took it though!
Thanks!
No jump for may in the ET challenge?
@@DerbyCityRC just been too busy man, i havn t even fixed it from last jump. I had to wait for parts etc…your jump is nice man. I will comment on that vid.
I definitely understand lol. My Kraton had been down since Christmas until right before last months jump!
Thanks! Ya you can still win stuff from commenting!
@@DerbyCityRC I find lately, i don t love wrenching on my Kraton. Weird. Channel is lookin good man. You re name is Evan?
Ya it’s not the easiest to work on, but I used to work on cars for a living so I don’t mind lol. Yup, that’s my name. One day I’ll formally introduce myself on the channel lol. Where did you see my name? Facebook?
Does anyone know if you can adjust the speed with a knob on the controller?
Long time fan man, love it!!!!
On 3S is a backflip and machine I eventually had it a 5 mm motor shaft 3900 KV put in mine on 3S you can get triple and quadruple backflips
Oh ya I’ve got a video with it on 3s too. It was awesome! Still stock electronics. It’s been trooping through my abuse!
When doing front flips are you hard braking at the end of the ramp or right after the front leaves the ramp? I haven't been able to nail one yet..😢
After, but when learning I recommend right after the car leaves the ramp. As you get better you can wait longer but it depends on the car. These definitely take a lot of practice. You’ll get it!
Great vidja!
I'm currently uploading the mt10- HR hub extension video right now.
Awesome! I’ll check that out as soon as I get a chance!
Love this truck. Same chassis as the pro4 sc which is awesome also. If you want a tough and wildy fast rig get a redcat kaiju 6s. Not the new ext. The original. It's the toughest rig I own and I beat on that thing. Also a blast to jump it. I added silicone ear plugs to center and rear diff. And bearings over each drive cup that's it. I run mine on 5s and it's insane!!
Great to know, thanks!!
Pro4 chassis is longer than the MT10. Everything else your same.
Nice! The MT10 does surprisingly well with its short wheel base. Longer certainly wouldn’t hurt
If me and my son both got one would the transmitters interfere with each other? It is each one on its own frequency
No you shouldn’t have an issue there. Just have to turn one car and remote on at a time so that the ESC of the car can learn which remote it’s bound to.
I'm not sure how good this would look against a Traxxas Maxx though, for durability or speed . Probably the Tracxas would smash it
I don’t have a traxxas yet, but just wait til you see this thing on 3s! I’m working on that video now!
@@DerbyCityRC I will keep an eye out 👍
Been had this MT since it came out , awesome , gonna get another one , just to have , they discontinued it but you can still get it on EBay
I believe they still have it on Amain Hobbies. They just came out with a version two but it seems to be the same except for a new body.
Yes one of my favorite trucks!
It was replaced with the V2
"I don't know if y'all can tell, but I'm being real hard on this thing"...YEA, we can tell LOL! Great video!
Haha!! 🤣 Thanks!! 🤘😎👍
the mt10 is our favourite basher but it needs some tweaks, sevro change, wheel nut change, and ditch the nut covers, we run both 2 and 3s and its fun on 2 and crazy on 3, ive also changed wheels on mine so its even crazier
Thanks for the info!
What wheels and nuts did you go with?
@@DerbyCityRC I did have fastrax nylock ones but I had 3 out of 8 fail on the mt10s so I've got steel ones on now as for wheels i went for jetko tomahawks after I damaged a stock wheel (hex burned out thanks to the fastrax nuts) and a full set of jetkos were about £8 more than a pair of stock and they have replaceable centres which has saved me having to buy another pair (the video at marley stadium on my channel shows them in action (21min in for 3s runs) sorry the videos not great i run stick radio and cant find a good camera mount)
Awesome, I’ll check that out.
Thanks for the info!
Hi did you buy cva s for mt10 and are they easy to fit
I did not 😃
Is these the first version
Yes
And with the steel spur gear upgrade is just complete insanity
I’ll bet!!
Not really. I had steel spur but, I took it off.
@@SnarkyRC A 3900 KV motor and new ESC spectrum a steel spur alone does nothing
I’ll eventually be putting a bigger motor in mine. Haven’t killed it yet!
Yeah I got the use out of mine before I replaced it It’s an epic trucks right out of the box
Can these wheels fit hbx 2996a
Yes they should fit with 15mm wheel spacers but I haven’t tried.
Get RPM arms asap. That's the first thing that is going to break. Great truck otherwise and i abused him a lot. Almost too wild with 3s.(instant wheelies with full throttle).
Yup they are already ordered and on my bench! Thanks for the tip!! Yes I’m excited to put 3s in there!
@@DerbyCityRC swap them as they break out of our 2 mt10s I've only had to fit 1 to 1 car but you'll need to get a set of hinge pins mine was bent 3 directions (I could have bent it back but its never going to be straight)
Good to know, thanks!
Are You! Runing it on 3s or only 2s?
Only 2s!!!!! 😱🤯
Ok so I put and heat sink/ fan and installed it into the auxiliary plug. It didn’t turn on. What am I doing wrong. Motor gets really hot
That’s odd. It’s possible it’s just a port for hooking up a program card.
@@DerbyCityRC figured it out but it didn’t last long. Lol. First jump the thing fell off and it ripped the wires out of it.
If your motor is getting hot, drop the pinion a couple teeth. Temps are all based on proper gearing.
😢
True
First run , left front wheel comes off and rounds the hex drive on the hub and wheel.
That stinks! I had a wheel come off on my 3rd run, which was on 3s. No damage luckily. Time for some loctite on the axle threads
What run times do you get out of it?
Wanna say a 5200 mah 2s is roughly 15 minutes. Just ran it on one the other day and that was about what I got.
@@DerbyCityRC doesn't seem very long. But you can always have a few batteries charger I guess. Don't want the fun to end too early 😭
Ya this is still one of my favorite trucks! Battery life is pretty typical for most RCs 👍👍
Battery 3s?
I did that in my next video on this car not too long after.
@@DerbyCityRC But in this video which type of battery do you use?
It was a 2s. It was a while ago but I’m pretty sure it was this one: amzn.to/46bV2VO
I think the Redcat RC MT10E is a better designed truck.
From what I’ve seen, the Redcat doesn’t hold up as well, but it’s a truck I’ve considered getting. What seems better designed?
@@DerbyCityRC the chassis and optional center diff. I heard the arms are the same. Also you can drill 12mm hex out to fit 12mm wheels or use 17mm adapters.
@@DerbyCityRC I bought a roller and saved as both rtr are over priced. I also fitted Redcat landslide shocks on and original springs handles better
Gotcha. Center diff makes it so much better!
Also you can out the Redcat Landslide shocks on it change bottom eyelet