THE BEHRINGER TD-3 MO IS AN ACID TECHNO MONSTER

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 443

  • @blush_response
    @blush_response  2 роки тому +7

    Buy my music: blushresponse.bandcamp.com
    Support what I do: patreon.com/blushresponse
    Buy gear here: link.perfectcircuit.com/t/v1/8-12626-278597-9759?url=https%3A%2F%2Fwww.perfectcircuit.com%2F

  • @zeitgeist909
    @zeitgeist909 2 роки тому +45

    behringer should throw this guy a percetange of all TD-3 MO's sold from now on! Best DEMO yet. Kudos.

  • @grosun
    @grosun Рік тому +7

    There's a short list of videos which directly resulted in me buying the synth in question, and this is one of them. Love the enthusiasm!

  • @3039-m9o
    @3039-m9o 2 роки тому +62

    Nice finally to see somebody with serious knowledge of how this shit works.

  • @VoltageCtrlRtv
    @VoltageCtrlRtv 2 роки тому +8

    I was on the fence about pulling the trigger on one of these once they are available again... this video has absolutely sold me getting one! Great sounds bro!!!

  • @ThrillSeekerVR
    @ThrillSeekerVR 2 роки тому +14

    Just ordered one

    • @zpurpz
      @zpurpz 2 роки тому

      Loveeee your videos !! Didn't know you were into music making too !!

  • @inkorrekt.k89
    @inkorrekt.k89 2 роки тому +116

    Hands down, best demo I've seen so far of the TD3-MO. Most demo's don't really showcase the mods to their full potential and I think you did a great job at that. Mine is coming next week, so really looking forward to it!

    • @piynubbunyip
      @piynubbunyip 2 роки тому +2

      You may like this one - very in depth analysis and not covered in fx ua-cam.com/video/_wIBKa7qoTM/v-deo.html

    • @behringer
      @behringer 2 роки тому +25

      We agree also - a fantastic demo! :-) Enjoy your TD-3-MO when it arrives next week - Dan

    • @blush_response
      @blush_response  2 роки тому +14

      @@behringer thanks! thats nice to hear. I'd love to review more of your stuff, is there a place to get in touch?

    • @cyberpunkbg140
      @cyberpunkbg140 2 роки тому +7

      I agree after this video I bought one too :)

    • @ChuckLeone
      @ChuckLeone 2 роки тому +6

      I honestly haven’t seen many TD-3 or TD-3MO demos where the user is actually doing more than programming notes and tweaking knobs.These boxes sound so good, most users are just content with it at that point and never dive any deeper. I’ve seen very few using any of the patch points or the random sequence generator. I use those 2 features constantly on my TD-3.

  • @strelokknoize
    @strelokknoize 2 роки тому +5

    By far the best TD3 MO demo.
    My red OG is already jealous.
    "No worries lil buddy. I'm gonna keep you too!"

  • @THEREALDATALORD
    @THEREALDATALORD 11 місяців тому +3

    DFAM/Edge velocity to TD-3-MO accent in is clutch. 10:30

  • @ninjasvsunicorns
    @ninjasvsunicorns Рік тому +7

    I watch alot of synth demo videos and there is a serious lack of this sort of thing! Thanks for making it sound fucked up and patching it creatively! I bought one of these last week because of this joyous and informative video!

  • @PreRendered
    @PreRendered 2 роки тому +18

    This is genuinely one of the best sounding synths I've heard, and I'm someone who is generally "over" the usual 303 sounds. This thing is glorious, though. What a clangorous delight!

  • @SosasRoomProductions
    @SosasRoomProductions Рік тому +2

    Genuinely one of the gnarliest synth demos I’ve ever seen
    Gotta pick one of these up, desperately

  • @tronlake
    @tronlake 2 роки тому +21

    the filter fm seems like an insane tool for sound design. killer demo

    • @ChuckLeone
      @ChuckLeone 2 роки тому +4

      Yeah the filter FM is definitely a killer feature, even on the non-MO version. The OG TD-3 can be found second hand for under $100 USD and can produce a lot of similar sounds to the MO version.

  • @XJA
    @XJA 2 роки тому +24

    That moment when you genuinely feel the joy he's having with the sounds!
    Somehow I feel the Tryptych (!) / & Modular Fx-extension take on a big role in this demo but that is certainly not a bad thing...
    Killer material in the right hands! X

    • @outlier5844
      @outlier5844 2 роки тому +1

      I have just bought one of these tonight and I have all those eurorack toys he is using with it, I am literally clenching my butt cheeks together for 3 weeks until it arrives!

    • @frantsel5711
      @frantsel5711 2 роки тому

      definately! A little sad, but without it sounds kinda weak and not a bit gnarly

    • @SiriusWave
      @SiriusWave 2 роки тому

      @@outlier5844 what’s the exact eurorack modules ?

    • @outlier5844
      @outlier5844 2 роки тому +3

      @@SiriusWave Triptych by SSF, Mimeophon for delay/reverb and plus several oscillators to fm the inputs of the TD3MO

    • @mam0sh
      @mam0sh 3 місяці тому

      @@outlier5844 Is there a cheaper way to get these sounds with the TD-03 MO without all the extra and expansive things that you mentioned?

  • @MF_Plissken
    @MF_Plissken Рік тому +2

    simple and massive. the dropouts on knobs are just the absolute kicker

  • @5lip5pace
    @5lip5pace 2 роки тому +2

    Blush, i always come back to your video for some serious devilfish inspiration. Thanks for the priceless knowledge

  • @InFamousProductions
    @InFamousProductions 2 роки тому +15

    I got one, and it's taking a little while to learn what all those mods do, and now I'm starting to feel the love. It is kind of subtle then kind of aggressive. I think Berhinger should mod out every single new piece of gear they manufacture from now on . just put built in circuit bending points and triggers and cv patch points . charge more money I don't care just up the game like they did on this one

    • @reecedeyoung6595
      @reecedeyoung6595 2 роки тому +7

      Berhinger does clones. The devilfish mod was a classic mod for the original 303 so they reproduced it for their TD3 they won't do modded versions of other gear because there aren't famous mods for them to copy

  • @terminalglimmer
    @terminalglimmer 2 роки тому +10

    Incredible demo! There's something about the raw, brusque quality of the 303 that just demands you slam it into fuck tons of dirt.

  • @cellrok
    @cellrok 2 роки тому +3

    nice one! got it on preorder. waiting for stock. 1 or 2 weeks. super hyped. the lack of filter-in cv on the td-3 was a really weird choice by Behringer.. this makes up for all of that.

  • @AudioKoppler
    @AudioKoppler 2 роки тому +2

    hahahaha i love the "f*ck" at the end....just bought one of these monsters and in my mind i was thinking the same "f*ck" to see what is possible.... thanks Blush

  • @guus010
    @guus010 Рік тому +2

    Great sound. Could you do a video on what you actually did (setup) to get to this sound? What type of midi pattern / cv do you suggest to get it?

  • @sawz_z
    @sawz_z 13 днів тому +1

    Incredible demo. What exactly did you connect to the TD3-mo?

  • @K904-mf2pq
    @K904-mf2pq Рік тому

    This is by far the coolest synth channel I've come across

  • @xoio
    @xoio 2 роки тому +2

    Sounds amazing, but How much of this is EXTERNAL processing though? For example at 1:22+ - You mention an external processor that gives the overdrive sound, which basically Transforms EVERYTHING! .. But you say it so quickly, i can't make out what it is you're saying...... Could you add to the description a list of ALL the external FX you're putting the MO through and what HW or software it is that does it..

    • @stephenroldan5107
      @stephenroldan5107 2 роки тому

      Yes. This is not the normal sound.

    • @stephenroldan5107
      @stephenroldan5107 2 роки тому

      He put it thru a modular filter

    • @outlier5844
      @outlier5844 2 роки тому +1

      He is using the Mimeophon for delay and a little reverb, the Triptych comb filter with distortion along with the DPO oscillator to audio rate modulate the filter CV of the TD3 MO

  • @MetalingKid
    @MetalingKid 5 місяців тому

    How would you remember that cool sound @ 12:50? ..it's a trip!

  • @InFamousProductions
    @InFamousProductions 2 роки тому +3

    Hey, do you have a compressor or side chain on that TD-3 Mo with the drums? it's pumping pretty good. maybe you can make a tutorial on that.

  • @TBSOAWM
    @TBSOAWM 2 роки тому +25

    Dammit man, i'm trying NOT to buy more gear but this sounds so good! :-)

  • @qi_kayon
    @qi_kayon 2 роки тому +5

    Appreciate you going full send on the demo 🔥🔥🔥

  • @russangel
    @russangel 9 місяців тому +1

    I just bought one of these that was a great fun demo dude.

  • @josuearesav
    @josuearesav 2 роки тому +1

    "We're just doing the most basic beat!"
    "Nice farts!"
    So much golden commentary on this one! You are an artist sir!

  • @besh303
    @besh303 2 місяці тому

    I love how fast you go from "got a simple pattern going" to a soundtrack from world ending. :)

  • @rlm4471
    @rlm4471 2 місяці тому

    10:30 Reminds me of Prodigy. It sounds incredible.

  • @taotechnique
    @taotechnique 2 роки тому +18

    Wow, i cant believe it, this is insane!! An actual replica of the devilfish mod, made commercially. What quacks like devilfish, controls like a devilfish, must be the devil, i mean a devilfish ;))

    • @piynubbunyip
      @piynubbunyip 2 роки тому +4

      The Devilfish mod is a commercial mod made commercially by Robin

  • @jg9093
    @jg9093 2 роки тому +1

    I was having doubts in buying this piece of gear. Your video sent them away. Amazing performance!

  • @barryon
    @barryon 2 роки тому +17

    This is an instant buy. 250 dollars is a steal for what used to cost thousands for a worn out second hand one. The market for "real" 303s must be tanking. What would you want one for?

    • @johnrichardson3297
      @johnrichardson3297 2 роки тому

      +/- $100 + Warranty lol

    • @lsdave
      @lsdave 2 роки тому +7

      Surprisingly its quite the opposite, the real ones are a rarity, which will always increase in value as they become more rare. The x0xb0x has been an authentic clone for over 10 years and it didn't even dent the price of real 303s

    • @THEREALDATALORD
      @THEREALDATALORD 2 роки тому +2

      Historical collectors.

    • @Engineeer
      @Engineeer 2 роки тому +2

      The prices for the original TB-303s are increasing constantly. I saw the price went from $2k to over $3k despite the release of Roland's own ACB clones, the Avalon, the RE-303 and the Behringer. I guess that there are so many clones have been released with the marketing around them was adding to the cult status. I guess some think that you only get street creds an acid producer, when you have the original. I have a few different TB-303 clones and VSTs, because I make almost exclusively Acid music. Sometimes I feel that I should have the original, but then the responsible me is telling me that it is insane to spend s much money on the original when my clones do the job just fine. Those, who buy the TB-303 now, are probably either rich and/or speculate in hopes of further price increases.

    • @charlespancamo9771
      @charlespancamo9771 2 роки тому +1

      250? Bro who is ripping you off? You could get new ones for 150 or less and used ones for 100 or less if lucky.

  • @MrBodegaHead
    @MrBodegaHead 2 роки тому +1

    This was a journey. Thanks for taking us along.

  • @user-MrsYT
    @user-MrsYT 2 роки тому +1

    sounds like theres a wild angry beast in the studio and its out of controll - love it
    after watching the whole vid, i feel like i got an infected bite from this evil mashine 😈😵

  • @jdre1976
    @jdre1976 2 роки тому +6

    The TD-3 MO may have just invented its own sub-genre..

    • @TryptamineRitual
      @TryptamineRitual 2 роки тому +5

      This is just acid techno man, good acid techno though.

  • @waynerbudgen
    @waynerbudgen 4 місяці тому

    My Black Edition of this arrives today, along with the Behringer Toro, and I can't wait to play with it, especially through my MXR Distortion pedal.
    I do have a TB-303 (Kenton mods only) and MC-202 (Kenton mods only) for my acid needs, but as I'm not prepared to shell out for a Devilfish, or send my 303 off to Oz for the mod, I thought the TD-3 MO would be a fun addition. This video was what convinced me to go for it. Great work.

  • @eliomarenciso8187
    @eliomarenciso8187 Рік тому +1

    Question, I'm a bit confused with the tune knob. I've noticed that at 12 o clock it sounds right on key. I see you increased it around 8:06 , doesn't that make the synth out of key?

    • @neonblack211
      @neonblack211 3 місяці тому

      The tube knob gives you about three octaves of range middle full left and full right, and the in between s

  • @s1Lash-s1Lash
    @s1Lash-s1Lash 4 дні тому +1

    i love this mate, please let me know which distortion pedals should i use for td3mo , also can you recomend some more pedals that goes with td3? :3 thanks

    • @blush_response
      @blush_response  4 дні тому

      Watch this video: ua-cam.com/video/lAo1upihN_c/v-deo.htmlsi=MkN9NI_0ehp1PD2G

    • @s1Lash-s1Lash
      @s1Lash-s1Lash 4 дні тому +1

      @@blush_response bro you are my new favorite person

  • @all6senses
    @all6senses 2 роки тому +2

    Nice video! What additional effects do you use on the TD-3 chain? I never seem to get these sounds out directly from the device!

    • @beepbleepboop
      @beepbleepboop 2 роки тому +1

      he def has tryptych by bll electronics on there and a delay

    • @beepbleepboop
      @beepbleepboop 2 роки тому +1

      oh the delay is the make noise mimeophon

  • @mitchminimal6942
    @mitchminimal6942 2 роки тому +1

    18:36 Look at her... Great demo. Can it do soulful acid like others have referred to? Sure, but this is just so much fun and it shows some of what you can do when you use it as part of a modular system. Loved it!

  • @originalmoogasauruskellymoser
    @originalmoogasauruskellymoser 2 роки тому +2

    That break at 9:50 though.........awesomeness!!!!

  • @BigStevo1
    @BigStevo1 2 роки тому +3

    Those moments where you just feel the total filth of this thing. Gives me goosebumps! Just got mine today! 🔥🔥🔥

  • @d.b.cooper5775
    @d.b.cooper5775 2 роки тому +2

    Been waiting a while for these, held off on buying the normal TD3. Glad I did now, just managed to find some in stock and placed my order, wasn't expecting to be able to but hey a pleasant surprise. Great demo, cant wait to my hands on mine. This demo defo sealed the deal.

    • @Sebrewer32
      @Sebrewer32 2 роки тому

      Where did you find stock? I’ve been looking everywhere and am struggling…

    • @d.b.cooper5775
      @d.b.cooper5775 2 роки тому

      @@Sebrewer32 Thomann UK but that was a month ago.

  • @jenniferw8963
    @jenniferw8963 2 роки тому +1

    Thanks for this video, that's so awesome. With all those cv jacks is it now possible to say send a sequence from MPC One (it has 8 channels of cv) and have it play the same as if you were to sequence internally?

    • @leftmono1016
      @leftmono1016 Рік тому

      The 303 sequencer is part of the sound. Without it, it's a pretty basic monosynth.

  • @Keepingyoung
    @Keepingyoung 5 місяців тому

    Waiting for the FedEx truck right now! Thanks for this demo, saw it last week and immediately ordered my TD3-MO

  • @xntricity6446
    @xntricity6446 2 роки тому +1

    Monster sums this machine up, omg I just need this madness machine immediately , 2 days to go and I'll have it. Thanks for the fantastic demo.

  • @NunyaB1s
    @NunyaB1s Рік тому +2

    Gonna be honest, I wasn't going to buy one of these until I heard what you did here. I don't have a Eurorack setup but I did pick up a PWM Malevolent and the second I saw you play around with the modular inputs, the sort of nasty evil rhythm section you have here is SICK. You could actually do a whole album around this, the Malevolent, and a sampler.

  • @terryberner
    @terryberner Рік тому

    That rips man
    Would it work with a matrixbrute

  • @Engineeer
    @Engineeer 2 роки тому +6

    Sounds really good in your track. In some settings, the mods are making the 303 almost unrecognizable. Those, who want to keep the classic 303 vibe should use these mods very carefully.

    • @stephenroldan5107
      @stephenroldan5107 2 роки тому +1

      Sounds more like sh 101 acid bass at that point. Not a bad thing

    • @Iredidv
      @Iredidv 2 роки тому

      True. If you turn distortion down the volume is cut off, so you always need a tad of distortion and can never get the clean 303 sound.

  • @ChuckLeone
    @ChuckLeone 2 роки тому +1

    Sick demo! You know a piece of gear is magical when you get giddy in the first 20 minutes using it.I can’t wait to hear what sounds you pull out of this after you have had for a while.

  • @macinead7
    @macinead7 2 роки тому +1

    The start of a new era. Absolute amazing 👏

  • @TheBroDotTV
    @TheBroDotTV Рік тому

    Definitely a good demo. Good job. Makes me very interested!

  • @NSW-ye3xw
    @NSW-ye3xw Місяць тому

    I wish those keyboard leds flashed when each step is played while the sequencer is running.

  • @5T45H
    @5T45H 2 роки тому +2

    Waiting for mine as well 😅 they said 15.02 will be available (Thomann). You're lucky u got it already.
    All the modular input is coming from your DFAM? Or there's something else you are plugin on the ins ? Thx
    Edit: I heard u say filter incoming from DPO ? I dunno that a bit new to modular. Just old Roland gear

  • @xirtus
    @xirtus 2 роки тому

    KING

  • @ScreamThatShyt
    @ScreamThatShyt Місяць тому

    9:38 dude knew damn well he just created fire !!

  • @xaosm_os
    @xaosm_os 2 роки тому +2

    memorable moments: 00:38 - 09:35 - 13:43 - 18:03 - 19:47 - 19:49

  • @TheEyeIllusion
    @TheEyeIllusion 2 роки тому

    this so freaking awsome......got to learn that with the analog cables...omfg........ drewling man thnx!

  • @6Litz_
    @6Litz_ Рік тому +1

    Dope demo! Subbed! Can you recommend something that would pair with the td 3 mo to acheive similar results as this? Preferably one device lol mostly referring to the lfo/fm/distortion modulation. Any help would be greatly appreciated 🙏🏼

  • @helixrider
    @helixrider 2 роки тому +2

    Best use of the MO, I‘ve seen so far on the web! A-W-E-S-O-M-E!!!

  • @xisotopex
    @xisotopex Рік тому

    have you played the malekko manther?

  • @janborreck5588
    @janborreck5588 4 місяці тому

    This is one of the reasons I got the TD-3, man your sounds are fucking incredible. what effects do you have set behind the synth? some delay?

  • @sheldondrake8935
    @sheldondrake8935 2 роки тому +4

    jesus christ what insane sounds
    when is the new record or five

  • @name8631
    @name8631 2 роки тому +2

    That moan at 10:28 really sums up the 303 experience

  • @pigknickers2975
    @pigknickers2975 2 роки тому +11

    That was genuinely good. So many bad demos, but this was really great, even you were like WTF! Amazing machine going to buy one.
    I wasn't understanding what was controlling the FM filter when you patched it in?

  • @JD-1991
    @JD-1991 Рік тому

    tryptid ? was that the unit with comb ? cheers , sounds fucking good

  • @interrorgationstudios
    @interrorgationstudios 2 роки тому +1

    Dude that’s f#%king insane!! Wow the best video on UA-cam on the TD-3 and TD-3 MO hands down! You should be lock up…… in a room with all the synths and forced to make music like this!!!!
    Let me know if you are interested in the near future to work on scoring a film?

  • @ohstirfry
    @ohstirfry 2 роки тому +1

    Canadians can finally pre order. I hope to have my RD-9 and this silver devil 😈 this year. Just pre ordered last night the TD3MO

  • @MenkeriosAndemicael
    @MenkeriosAndemicael 3 місяці тому

    can you recommend a versatile synth to get to mess around with that filter-in? What are you using here?
    I was looking at a Behringer D

  • @DmitryPuffin
    @DmitryPuffin 2 роки тому +1

    So aggressive sounding. Love it. Maybe I should buy at some day, to replace my TB3 in some cases.

  • @EarlyMist
    @EarlyMist 2 роки тому +4

    That riff around 9:40 on...goosebumps. Can just the td3 mo do that alone? Or is one of your external modulators involved? Cheers.
    EDIT: I payed more attention to the start of the vid...and that answered my question. I dont have any modular but have some solid guitar pedals that will have to suffice 👍

    • @miguelonvalencia
      @miguelonvalencia 5 місяців тому

      How was your experience with the pedals? Did you achieve something similar to the video?

  • @brunobridge7253
    @brunobridge7253 7 місяців тому

    Love this . Sounds like a demonic robot running on the spot until the rivets pop. Well done 👏

    • @twiglet2214
      @twiglet2214 7 місяців тому

      ...and the ' low oil pressure light ' comes on !

  • @lockyp204
    @lockyp204 2 роки тому

    Got to love the deadpan “yeah” 🤣

  • @fangan4770
    @fangan4770 2 роки тому +1

    Can you guys recomment any good vst / plugins FX to run the TD-3 MO through in my DAW? I think it's a cool demo, but you have to know that you don't only hear the TD3-Mo.

    • @outlier5844
      @outlier5844 2 роки тому +2

      A comb filter with distortion will sound similar to the Triptych Filter he is using here to get those brutal earth shattering sonic waves

  • @neonblack211
    @neonblack211 7 місяців тому

    Kind of amazing the range of insane dirty noises you can get out of just one oscillator

  • @ryanbottger
    @ryanbottger 8 місяців тому

    Almost 400 comments at this time and nobody has pointed out the awesome Zoth Ommog shirt! I miss that label.
    Also, the sounds in this video give me chills!

  • @BartWronsk
    @BartWronsk 2 роки тому +3

    Man you're killing it :o what a demo, made me desire a MO (I have the TD3 and it's just 303, good clone, still sh***y sequencer, but sound we've heard million times)

    • @telkmx
      @telkmx 2 роки тому

      The seq is still shitty no ?

    • @BartWronsk
      @BartWronsk 2 роки тому

      @@telkmx yeah, worst sequencer I ever had :( can sequence externally, but then it's a very large unit that I don't use a half of

    • @djhellraiser303
      @djhellraiser303 2 роки тому +8

      The sequencer on the 303/TD3 (and other clones that have the classic TB303 style sequencer) is a huge part of the original acid sound and where the magic happens. Using external/DAW/midi sequencing to create patterns just doesn't get that same crazy "rattling" sound that made the 303 so unique. It is anything but "s**tty," it just takes a bit of work getting to know it, but once you have, the patterns you get happening will have that distinctive 303 madness. The MO has the same sequencer, Behringer would never change that, they made the synth tool program and there are other programs that change it to the more DAW midi styled sequencing, but it is definitely worth getting to know the onboard sequencer more to create the most unique patterns. But that is just my opinion, in the end, as long as you are having fun making patterns and mad noise, that is the most important thing.

  • @oldschoolebm666
    @oldschoolebm666 2 роки тому +2

    Pure 🔥. You should have waaaaay more subs. Keep it up!

  • @Theshabadaman
    @Theshabadaman 2 роки тому +2

    Came to hear a few sounds, ended up vibing for 20 minutes instead 😂
    What other gear are you using? That filter is brutal!

  • @donnas8408
    @donnas8408 2 роки тому

    Why do I need this when I have a moog synth and a prophet 6?

  • @genxzero9478
    @genxzero9478 4 місяці тому

    killer demo! thanks!

  • @imraan6405
    @imraan6405 2 роки тому +1

    Please dont lose your enthousiasm, super nice

  • @hansgerrl1044
    @hansgerrl1044 5 місяців тому

    Ist it possible to combine the MO with a normal TD-3?

  • @brokenscart7989
    @brokenscart7989 10 місяців тому

    Funny, I discovered your albums the other week on Spotify and was loving them, and was watching this video and suddenly recognised your name! Great stuff and you’re making me want the MO.
    What’s with the two finger ring?

  • @Funkychump69
    @Funkychump69 4 місяці тому

    This is basically like listening to Alex Hazzard on Dance Nation Radio early 92. Absolutely fucking brutal and I have to say this video is massively addictive. Quite possibly my fave demo of all time.

  • @Kyoshii_epic_weird_wonderful
    @Kyoshii_epic_weird_wonderful Місяць тому

    On my wish list now deffff!

  • @monotrious
    @monotrious 2 роки тому

    Thanks For A Totally Awesome Sounding Demo !

  • @markcox6334
    @markcox6334 2 роки тому

    Please, Joey or another viewer, my daughter wants a bass synth to match up with Korg drum machine. Both have midi ports. Are they compatible inline? TIA mark

  • @markkilley2683
    @markkilley2683 2 роки тому

    They did a fab job with this one. I wonder what's the life span of mini sockets?

  • @TheMrMaesroel
    @TheMrMaesroel 2 роки тому

    Verry cool vid.What does the first filter in do? Grts

  • @kenniferlopez1
    @kenniferlopez1 Рік тому

    That's it! I am getting one when I replace my Tracker next month.

  • @Robert_Babicz
    @Robert_Babicz 2 роки тому

    great demo....

  • @Pilldickle
    @Pilldickle 2 роки тому

    Thanks for the GAS! Sad these things seem to be on back order in the US right now. Great demo!

  • @djhelloh
    @djhelloh 2 роки тому +1

    Is it already on stock anywhere? I can't even wait 1-2 weeks or maybe more to get mine :D

  • @tomrhodes7977
    @tomrhodes7977 2 роки тому

    that is flipping incredible!

  • @benlb11
    @benlb11 2 роки тому

    You should do sales for Behringer. I'm getting one now because of this video.

  • @SkeeverKid
    @SkeeverKid Рік тому

    Do you have a full gear list for this demo?