How to Replace Power Steering Pump 2003-2007 Nissan Murano
Вставка
- Опубліковано 17 бер 2022
- Buy Now!
New Power Steering Pump from 1AAuto.com 1aau.to/ia/1ASPP00194
A failed power steering pump will make lots of noise, and you'll have trouble steering! This video shows you how to install a new power steering pump in your 2003-2007 Nissan Murano.
This process should be similar on the following vehicles:
2003 Nissan Murano
2004 Nissan Murano
2005 Nissan Murano
2006 Nissan Murano
2007 Nissan Murano
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 12mm Wrench 1aau.to/oa/1AXAA00010
• 12mm Socket 1aau.to/od/1AXAA00015
• 17mm Socket 1aau.to/od/1AXAA00015
• 21mm Socket 1aau.to/ob/1AXAA00043
• 24mm Socket
• Socket Extensions 1aau.to/od/1AXAA00015
• Torque Wrench 1aau.to/ob/1AXAA00044
• Brass Punch
• Hammer 1aau.to/ob/1AXAA00091
Subscribe: / @trq
Check out our playlist:
Nissan Murano 2003-2007 1st Generation: • Nissan Murano 2003-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thanks bud. Video of as a bunch of help. Had a little trouble getting to some of the bolts.
Thank you so much this is an outstanding job thank you for the video
Your video is very detailed. Thank you! Good job it's nice to be able to look something up and it be spot on.
Thanks alot for sharing ❤
great video. really good explanations. Thanks!
I'm loving the videos
Thanks for the video you really explained it to a T
Thank You Sir
Does this video also work for the 2010 morano?
I have a 2004 Nissan quest I changed the pump in it it's not up against to where it slides and I was wondering what the problem of it was there the real pain to changes its really tight
My pump started do drip oil on on of the bolt by the O ring . Do you know what might be the problem?
Did you have to flush old fluid out before install of new/repaired pump
what size are the wrenches you used
Do you have one on Nissan 2007 quest?
+TinyDragonGamer Yes, here's the how-to video you're looking for: ua-cam.com/video/I-a2DxVt8-s/v-deo.html