Replacing The High Pressure Power Steering Hose On A 2002-2007 Nissan Murano
Вставка
- Опубліковано 8 кві 2017
- Brian Eslick from How to Automotive www.howtoautomotive.com takes you step-by-step through the process of replacing the high pressure power steering hose on a 2002-2007 Nissan Murano.
Affiliate link mentioned in the video for Omega 55040 Power Steering Pressure Hose amzn.to/2nZdBbB
Affiliate link mentioned in the video for Genuine Nissan Fluid 999MP-AG000P Power Steering Fluid - 12 oz. amzn.to/2ohiBLp
Affiliate link for How to Automotive Tool Store www.amazon.com/shop/howtoauto...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive - Авто та транспорт
IDK how this isnt a recall. I just finished my cousin's 2005 Nissan Murano. This video saved me about 500 bucks. Thank you soo much. I ended up having to remove the wiper blades and panel off but that only added about 10 more minutes to my 2 and a half hour job. I just took it slow and went step by step along side with the video. Even someone with no mechanic background could do this job with this video. This deserves WAY more likes. You are the truth!
CaptLowRez that’s awesome you got the job done. Glad video was of help. Thank you for watching!
@@HowtoAutomotive do you have a video on how to remove the power steering pump?
@@HowtoAutomotive Can you show how to replace a crankcase breather hose on a Nissan Murano? Mine ripped while installing a new valve cover gasket.
Jeffrey Meeks I could do it if I had one in the shop. And who knows when that will be.
@@HowtoAutomotive I gotcha. Well if ever one comes your way I'd appreciate if you could guide me through it.
Great video! After you fill the steering fluid reservoir, don't start the car yet to avoid possible damage to the power steering pump. While the car is still on jacks, leave the cap off the reservoir, insert the key and turn to the ON position but DON'T START the car. Turn the steering wheel slowly all the way to the left, and all the way to the right. You'll see some bubbles coming out of the reservoir. Repeat turning the steering 5 or 6 times or until there are no more bubbles. Top off the reservoir to the correct level if needed. Replace the cap.
I’ve seen hundreds of car repair videos. Dude, your among the BEST out there. Thanks for empowering all us shade tree mechanics 🏆 🙏🏼
Great video. This is probably one of the most thorough and high quality guides I've seen.
Just tackled the job on a 2009, it's a little different, its got a banjo bolt on both sides but the rest is the same.
The video here is really good, the hardest part of the job for me was lining up the banjo bolts, so like he says in the video leave the brackets loose so you have more flex when you go to line banjo bolts.
Other than that it would of took me half the time.
Hey Boss, i saw you commented 4 hours ago, so I wanted to ask, was it difficult at all? Which part did you use? OEM or did you get one of the aftermarket ones from Rockauto?
This is a great instructional video. After watching it, I decided to do it myself and saved about $500. One correction after checking the service manual. The torque spec for the banjo bolt is not 6 ft-lb but 6 kilogram-meter, or 37-50 ft-lb.
gang208 glad the video helped and save you money. Thank you for the tip and for watching!
Excellent video. Very clear, you explained what size wrenches are needed, which is really appreciated, and you actually knew what you were doing.
Glad you like the video. Thank you for watching!
Thank you for saving me $350 in repairs! I like to do my own maintenance, but I didn't know where to start with this power steering leak on my wife's Murano.
BlueMaxOneNine glad the video helped and saved some money that's awesome. Thank you for writing and watching!
Great video my 06 murano had developed leaking from right side of engine somewhere,just a little dribble.
Well I went to replace shocks /struts and noticed the right strut was blown out with fluid leaking out of it and thought there is my leak
Problem solved. No leak was still there,I watched UA-cam vids which had me convinced it was the oil cooler seal behind the oil filter but now after hearing my power steering pump make noise then stops after adding fluid I’m now convinced this HP power steering line is it.
Was just watching your video one more time and am about to go out jack it up and have a look then order or buy the part if I find evidence of it leaking. Seems torque spec on banjo bolt is low maybe it’s just loose lol.
your videos are really helpful. Thank you
Glad the videos are helpful. Thank you for watching!
Fantastic job. Thanks for the video, it's a really big help.
soesterbergblue glad to help. Thank you for watching and writing!
Good job , Victory, Thank you for your video
Shaka Khan glad to help. Thank you for watching!
Good job 😀👍
Hey Brain thanks for sharing this video really appreciated.
Muy bien colocada la manguera nueva. Se debe instalar tal como usted lo hizo, sin quitarle el aislante térmico, muchas gracias
I need to replace my back 3 spark plugs. May be a good time to do that when I replace the line. Thanks!
Flawless Victory Great Video and Superb Explanation.
Edwardo Garay glad the video helped out and thank you watching!
Nice job. How difficult is to replace the rack and pinion on a 2004 nissan quest?
thank for the info i will try it should be fun great video
john lui glad to help. Thank you for watching!
thank for the great video!
ricardo gomez thank you for watching
Wonder if this will work for a 2009 to 2014 Murano. I assume it would, but it's the same problem I'm noticing.
i think this is a tsb currently on the ones today aswell
Thanks
I change the power steering hose but few weeks later is losing steering fluid it make sound when I am driving what could be
How do I know if it's the hose or the pump I need to replace? Its sucking up fluid like crazy. The fluid once refilled only last about a day.
Thanks so much for this video!
I have a question.
Can i just use the dexron 4 to fill it up instead of nissan fluid thanks! and subscribed now!
Smart Grass I'm not hundred percent sure if that's safe. I would try to find the right fuild
I use dextrin, no issue @up dawg.
Fr Dr , cg
thank u brain
khaled ganimi thank you for watching!
Hey great video :) I was wondering if a 2011 would be about the same?
Bruce Rudolph It’s going to be similar for sure I actually think it’s a little easier.
Yay! Thanks for the quick reply. :)
If the power steering is leaking that can be the cause that my Murano 09 is like on limp mode also my battery and brake light blink a lot but when they test baterry and alternator are good
Cesar Medina figueroa you need to pull engine codes and go from there. I don’t think the power steering leak has anything to do with it.
Why do the line goes all way to the top?
My O-ring kit came with two washers and two O-rings a big one and a small one but my original banjo bolt only had two washers on it no ring. So does my 05 Altima not need a oring on the banjo bolt? And also out of the two o rings I got in the kit, which goes on the driver side end? Or do both?
The o ring don’t go on the banjo bolt, goes into rack and pinion
@@robertsparaney5921 thanks, I finally figured it out and haven’t had any issues for the last 2 years
Where's the link for the O ring sensor?
Dude, this video is the same for a 2007 Nissan Quest except, a lot less room underneath. Total nightmare! (8hours). Worst job I've ever had to do on a vehicle. I would have preferred to pull the engine than this, LOL .
😂
What size was the power steering pressure sensor switch? 🙏🏾
24mm
can this cause a fire if this will fall over the manifold exhaust? i mean a leak on the power steering line
Erick Danilo there is a possibility for it to happen although I have never seen it.
do you have to replace the high pressure sensor when you replace the hose?
No, but be careful removing sensor from power steering line when off the car and use a new o-ring. The sensors are kinda pricey, for a DIYer it's not too much trouble to replace the sensor down the road if needed, it's the most accessible area of this whole job.
Bro a turkey baster is crazy 😂 but yes it would work
Was trying to think of people at home that may not have tools.
How much would you charge for a job like that
I change power steering hose
buon pomeriggio io abito italia,Frosinone e qui quando vedono la mia nissan murano non sanno dove mettere le mani,io lo presa usata a marzo e dopo circa un mese fa rumore quasi a fine corsa quasi con tutto sterzo girato fa un rumore come se vibrasse e toccasse qualcosa!! mi sapete dire cosa in effetti puo essere,un meccanico mi ha fatto cambiare pompa idroguida ma fa piu rumore di prima la pompa lo presa usata montata dal meccanico ma fa piu rumore della precedente,cosa puo essere questo rumore che fa quasi fine corsa quasi con volante sterzoquasi fine corsa sia lato destro che sinistro e questo rumore si sente sopratutto ad auto ferma nei parcheggi mentro faccio manovra. mi dite cosa puo essere?? e i ricambi dove potrei trovarli comprarli??
good afternoon I dress in italy, Frosinone and here when they see my nissan murano they do not know where to put their hands, I used it in March and after about a month ago noise almost at the end of the race almost with all the steering shot made a noise as if it vibrasse and touch something !! you know what in fact can be, a mechanic made me change the hydraulic pump but it makes the noise more than before the pump it used to be mounted by the mechanic but makes the noise of the previous one, what can this noise do almost end running almost with Steering wheel steering at both right and left side, and this noise feels particularly stuck in the car parks I maneuver. tell me what can it be ?? and spare parts where I could find them buy it ??
I am guessing this is a FWD murano?
Nissan appears to be having power steering issues on the Murano from 2003 all the way to 2017. You'd think they have it figured out after 14 years. On the earlier models, the same power steering pump from the Altima is used on the Murano. That's a dumb decision by Nissan (or smart --trying to cut cost). The Murano is a lot heavier than the Altima.
Bryan Chance i’m sure it’s all about cost-cutting.
Nice. How much do a mechanic will charge for this job?
I got a quote for $350.00 - 2 hour labor
I'll be doing it myself. Biggest chore is the top bolt as there isn't much room to work with and its going in blind.
Extra 20 minutes to remove the plastic molding on top. Is much easier.
Is the a access hole to get a tool in there to remove that bolt after your remove the wiper molding?
@@CoreNiel yes
Hi Nissan dealer quote me $1700.00 dollars for the same work you are thing. Is this a fair price or do you think is a steep price?
$1700 to replace a hose and you're asking whether or not it's reasonable? I guess it is for you
Horrible design!! Did it once in 2014 and now it's leaking again. Thanks for sharing.
Can I get you to fix my car
Are you in the San Diego area. My shop is in Encinitas California
@@HowtoAutomotive how much do you charge ? I have 2005 Nissan Murano that is leaking from the power steering pressure hose, I live in San Diego
a murano?! shit i thought this was an altima the whole time!!! ... prolly not much diff tho anyway eh?
How do you loose the pressure hose? By turning it left or right? Poor video.
Only an idiot has to ask which way to loosen a bolt and then try to blame a video. Take it to a mechanic, or have your wife do it for you schmuck.