Thankyou very much on instructions on how to install the roller pin into the idle end plug with that little plastic insert. Did not know what to do there and the Coolaroo instructions leave a bit to be desired in that depsrtment. Good humor always appreciated
Love helpful DYI videos like this! Helps keep the stress level waaay down--very important. None of us need added stress. I'm sure the instructions that came with the shade would have driven me crazy. Well, I'm off to install my sunshade, and feeling pretty confident thanks to this video. 😊👍 This is a very sincere thank you for making this video.
I cut the plastic handle off the crank and hook it up to my drill for automated roll up/down. Works great. Just make sure the drill isn’t on high speed.
Great video!! I am going to Lowes and buy two today for my patio, I was looking at the one at Costco but I like this brand better, it is about 20% more but I like the crank to fold and hang straght, the one at costco is a permanent bend and will not hang straght Put a small hook on the side of the wall and it will hold the crank out of the way when not in use Cheers
At 7:10 - You can see that there is a dove tail on the piece that fits into the the dove tail slot on the holder bracket. Once that is placed into the slot it becomes s spring loaded lock, the pin in the shade just snaps into place from the front.
Great video! I have a cinder block & stucco finish. I think I need cement screws to anchor unit. Also, what is the longevity of the shade, and the plastic hardware that comes with it? Thanks.
It's been 3.5 years since I posted it. And the sunshade is still doing great. No tares, no rot, nothing. Hard ware is also in great condition. Love this sunshade.
@@jonahvlogsdiy4143that’s awesome that it’s still holding up. How does it hold up in string wind when it’s fully extended? Does it flap back and forth or is it breathable enough that it flows right thru the fabric?
Nice vid. Thinking of buying it. On the inside of my patio I have lightbulbs so I can't put the coolaroo there, however I could put it on the exterior surface. Would that be a problem?
Great question! It's currently hanging at 8ft from the floor. And its very convenient to to use the crank rod but at 9.5 to 10ft it was difficult. I would say 12ft is impractical unless you use a chair or step ladder.
I want to install these blinds 1 feet away from my exterior way so that it can block the heat the sunlight. Can I install the two end units under the eave rafters? The rafters are not strictly horizontal but with some angle. Thanks
Use garage door hangers, or something similar to get the roller installed level: www.garagedoorstuff.com/product/garage-door-opener-hanger-kit/ Stay gold.
What happens if u get a warm breeze but the sun is shinning, how do u stop the blind from blowing or moving, is it secured at the bottom, or is it just weights holding the blind from strong winds or breezes
There should be two holding clips with which comes with the blind. And two bungee cord with a small ball to attach to the clips and hold down the blind.
My patio is at an angle that from one end to the other are about a 12 inches to a bit more. Any DIY ideas how I can put a roll away wall to protect me from the elements of the wind or rain when I'm using my patio in the winter and then remove it or hid it in the summer?
@@jonahvlogsdiy4143 Thank you because I use my patio year round planting succulents, entertaining, etc. but in the winter it gets pretty cold then adding the wind and rain makes it hard to work in the patio for too long.
@@jonahvlogsdiy4143 Cool. Thx for the reply and mine came so that it rolls down from the back not over the top, similar to toilet paper lol. I assume it doesn't matter which way it rolls out. Thx from SW Ontario, 🇨🇦
I just installed 5 of these today and a strong wind came up and blew two of them on the south side out of the brackets somehow. Can’t figure out how. Any ideas?
I’ll need the instructions since I want to install mine hanging from ceiling if my Lanai. You have make adjustment to the both brackets they are not very clear. Ex. Remove 4 screws? There only 3 screws 😅. Thanks though.
No, y’all making it WAY to complicated, use a self tapping screw which screws in easy and won’t split the wood, don’t use the garbage Hayward they send in the box
Not the correct way to install it. The locking clip on the opposite side of the clutch/crank is not to be taken out. You install the bracket where it’s supposed to go then push the plunger past the lock clip (which has spring retention) and then pinch it to pull the plunger back out if you want to remove it. Sorry I just couldn’t leave it alone - this should literally take 5 minutes to install
Yeah that's the way I would have done it, the instructions in the pamphlet are completely misleading that and the fact they give you drywall anchors and say you'll need a f******3/16 drill. Who the hell installs a 10ft outdoor sun shade into drywall?
It's Coolaroo, with two Os at the end. It would have been nice if you showed the finished result in its entirety, commented on their effectiveness and if you are happy with them.
Thankyou very much on instructions on how to install the roller pin into the idle end plug with that little plastic insert. Did not know what to do there and the Coolaroo instructions leave a bit to be desired in that depsrtment. Good humor always appreciated
Awesome! So glad my video helped.
Love helpful DYI videos like this! Helps keep the stress level waaay down--very important. None of us need added stress. I'm sure the instructions that came with the shade would have driven me crazy. Well, I'm off to install my sunshade, and feeling pretty confident thanks to this video. 😊👍 This is a very sincere thank you for making this video.
So Glad it was helpful! Thank you so much for the visit.
You give me hope, the hubby and I are giving it a try...wish usluck :)
Good luck & I know you can do it.
I cut the plastic handle off the crank and hook it up to my drill for automated roll up/down. Works great. Just make sure the drill isn’t on high speed.
Great idea.
Haha awesome
Pretty Cool! Thanks! I love how you're so cool working with the kids playing in the background.
You are so kind. I love the kids especially when they enjoy the pool in the summer.
I appreciate the instructional video, very easy to comprehend.
Glad to hear that! Thanks for watching Miguel.
Mahalo from Hawaii! Finally some easy instructions!
Thanks JT. Great to hear from Hawaii. Love Hawaii!
Great video!!
I am going to Lowes and buy two today for my patio, I was looking at the one at Costco but I like this brand better, it is about 20% more but I like the crank to fold and hang straght, the one at costco is a permanent bend and will not hang straght
Put a small hook on the side of the wall and it will hold the crank out of the way when not in use
Cheers
Glad it was helpful!
Beautiful 👍
Thank you! Cheers!
At 7:10 - You can see that there is a dove tail on the piece that fits into the the dove tail slot on the holder bracket. Once that is placed into the slot it becomes s spring loaded lock, the pin in the shade just snaps into place from the front.
Excellent observation . Thanks for sharing.
Just bought one! Thank you for this video!
Hope you enjoy it! I love this sunshade. The weather is getting warmer & I'll be putting it back up soon.
Great job on the video saved me a lot of time with my installation. Thank U
You're welcome! Thank you for the visit.
Great video! I have a cinder block & stucco finish. I think I need cement screws to anchor unit. Also, what is the longevity of the shade, and the plastic hardware that comes with it? Thanks.
It's been 3.5 years since I posted it. And the sunshade is still doing great. No tares, no rot, nothing. Hard ware is also in great condition. Love this sunshade.
@@jonahvlogsdiy4143that’s awesome that it’s still holding up. How does it hold up in string wind when it’s fully extended? Does it flap back and forth or is it breathable enough that it flows right thru the fabric?
Thanks, seems very easy.
No problem. Thanks for the visit.
😎 Cool 😎 Thanks for the help.
No worries. Happy to help!
Nice vid. Thinking of buying it. On the inside of my patio I have lightbulbs so I can't put the coolaroo there, however I could put it on the exterior surface. Would that be a problem?
Have two other ones that are exterior surface and no problems so far.
@@jonahvlogsdiy4143 very good, thank u
Great video. Thank you!
Glad you liked it!
Very Helpfull :) thx
Glad it helped!
Thank you for the excellent video 😊👍
Glad you enjoyed it and thank you for the visit.
Can the anchors be used on Stucco?
I'm not sure William. You may have to go with longer screws.
Ty you made much easier
Thank you.
thanks for your helpful video🙂
Deserve ⭐⭐⭐⭐⭐ stars
Glad it helped. Thanks for watching.
Very helpful
Glad it helped. Thank you for the visit.
At what height would the crank become impractical? I want to hang a shade at 12’ height
Great question! It's currently hanging at 8ft from the floor. And its very convenient to to use the crank rod but at 9.5 to 10ft it was difficult. I would say 12ft is impractical unless you use a chair or step ladder.
You're awesome thank you God bless
Thank you.
I had to hang mine pretty high so using the crank is impossible without a stepladder. An instruction on how to add a motor would be wonderful.
Lol. That would be nice.
If you're going to waste your money buying a motor to add on to this, you may aswell just buy a motorized shade instead, lol.
Cool editing 🤟
Thanks 😁 And thanks for the visit.
Great video. Question for you: So my patio is stucco. Do you think this will work on a stucco wall?
I think if you use a strong anchor it will hold.
Can you install this on a cieling? As apposed to a 4x4 going across and mounting it on its side.
Yes. You have to adjust the mounting kit but the instructions on how to do that are included.
Thanks Jonah!
No worries. Thanks for the visit.
Hi great video, wanting to use this as a roof for a pergola. Do you know if this material is waterproof?
The material is water resistant. And yes you can use it as a roof for the pergola.
very helpful
Glad it helped . Thanks for the visit.
I want to install these blinds 1 feet away from my exterior way so that it can block the heat the sunlight. Can I install the two end units under the eave rafters? The rafters are not strictly horizontal but with some angle. Thanks
If you can make it as level as possible, it would be better.
Use garage door hangers, or something similar to get the roller installed level:
www.garagedoorstuff.com/product/garage-door-opener-hanger-kit/
Stay gold.
What if one side for bungee cords don't reach???? Help
You have to DIY it with an extra chord / rope to make it reach.
@@jonahvlogsdiy4143 Thank you
The dollar store is your friend. Lots of bungees there in different lengths.
What happens if u get a warm breeze but the sun is shinning, how do u stop the blind from blowing or moving, is it secured at the bottom, or is it just weights holding the blind from strong winds or breezes
There should be two holding clips with which comes with the blind. And two bungee cord with a small ball to attach to the clips and hold down the blind.
Thanks installing 3 tomorrow
Glad I could help.
My patio is at an angle that from one end to the other are about a 12 inches to a bit more. Any DIY ideas how I can put a roll away wall to protect me from the elements of the wind or rain when I'm using my patio in the winter and then remove it or hid it in the summer?
That's a great idea. I'll have to think of how to do it for my deck this summer. If I do, I'll do a video on it.
@@jonahvlogsdiy4143 Thank you because I use my patio year round planting succulents, entertaining, etc. but in the winter it gets pretty cold then adding the wind and rain makes it hard to work in the patio for too long.
Time to move
So I just installed the 10' shade. Thanks for the great video. Did yours have a bit of a sag because of the weight/length
Funny now that you mentioned it, I looked at it closely. I do notice a very small sag but I never noticed until you mentioned it. LOL.
@@jonahvlogsdiy4143
Cool. Thx for the reply and mine came so that it rolls down from the back not over the top, similar to toilet paper lol. I assume it doesn't matter which way it rolls out. Thx from SW Ontario, 🇨🇦
@@markb3954 That was my biggest question, was which way to install
@@cashonly6117 i left it rolling under from the back.
I just installed 5 of these today and a strong wind came up and blew two of them on the south side out of the brackets somehow. Can’t figure out how. Any ideas?
I try to roll it back up when not in use. If rolled down, any strong wind could blow it out.
Thank you!!!
No problem. Thank you for the visit.
I’ll need the instructions since I want to install mine hanging from ceiling if my Lanai. You have make adjustment to the both brackets they are not very clear. Ex. Remove 4 screws? There only 3 screws 😅. Thanks though.
Sometimes predrilling the hole is better
Yes you're right John. Thanks for the visit.
Pilot hole sure helped me
No, y’all making it WAY to complicated, use a self tapping screw which screws in easy and won’t split the wood, don’t use the garbage Hayward they send in the box
From where I get one of these please?
Sam’s club
I got them at Lowes.
do you know the width of the hanging brackets?
The width of the bracket is only 2-3 inches.
there is another youtube video which shows how to modify the crank wand, so that you can use a cordless drill to raise and lower the shade.
That's a great idea. I'll look into that.
Thank you
You're welcome & thanks for the visit.
Not the correct way to install it.
The locking clip on the opposite side of the clutch/crank is not to be taken out. You install the bracket where it’s supposed to go then push the plunger past the lock clip (which has spring retention) and then pinch it to pull the plunger back out if you want to remove it.
Sorry I just couldn’t leave it alone - this should literally take 5 minutes to install
Thanks for the info. I'll look into it.
Measurement is what? Pilot holes prevent "butterfingers"
What?
Always drill pilot holes bro.
Good tip!
Why?
Yeah that's the way I would have done it, the instructions in the pamphlet are completely misleading that and the fact they give you drywall anchors and say you'll need a f******3/16 drill. Who the hell installs a 10ft outdoor sun shade into drywall?
LOL. You're right.
From where can buy it
I bought mine at Lows in Canada but I think at Amazon also.
Mahalo!
Thank you and thanks for the visit.
The lack of pilot holes gave me anxiety
Why?
will these work on a 10 x 12 metal gazebo?
Yes for sure.Pre drill the hole in metal with a smaller diameter for the screw & you should be ok.
What if you have metal railings
You can use a self tapping screw after pre drilling the holes.
Lightning on the video sucks
lol
Aloha - Hi or Good bye 🌋
Hello & thanks for the visit.
You need a better camera person!
@@michaelscally1871 lol
I want to finish watching this but I've had to watch 4 ads within the first 5 minutes........
Thats why the videos are free to watch. Lol
the left side snaps into place. you don't slip it into a hole!!!!!!!!!!
It's Coolaroo, with two Os at the end. It would have been nice if you showed the finished result in its entirety, commented on their effectiveness and if you are happy with them.
I'll do that very soon. Thanks for the comment.