you didn't mention if we leave the initial ink until the full set up is done or if we were supposed to unplug it before it did that? Some of the comments are made as if a person knew how to initially set up the machine. I hope that it will work correctly. :)
I did the conversion with the original cartridges just like the video showed then at the end replaced with the dtf ink was that not correct? Now the printer will not recognize the refillable cartridges. Help please ☹️
Hello! I recently converted my XP 15000 and I’m having some issues… Is there anyway I can get a one on one call about troubleshooting or just how to fix my issue in general? Thank You
I had my xp15000 for one week. I went 2 days without printing on it, although I did power it on both days and run printhead clean with the cleaning carts. The printer will not print anything but black and yellow. I've tried soaking the printhead in cleaning solution and it did nothing. These printers really do not want to print DTF.
Thanks for the video very much helpful. So I converted my xp 15000 to dtf with C.I.S ... But I was able to print the white all four other colors print when my nozzle check but not the white.. Can it be the wrong type of white.. Or any suggestions?
Hi! Can list everything u need to convert with links please.. I need to find all of it and I’m having a hard time finding the exact stuff u used to convert
New to your channel I would love to see a video on how to install the ink cartridges. I am very interested in converting mine. Just wanna make sure I have all the steps.
Hello and thanks for watching! You should be able to still convert you just have to make sure you throughly clean out your carts or replace them with new ones.
Hi, thank you so much your video is so helpful and simple to understand. Very new to printing, currently researching printers to buy, interested in doing dtf however would still love to be able to do sublimation as well. Once this printer has been converted to dtf could you still do sublimation too? Or would I need to purchase another printer? Thanks so much!
Humble.... definitely NOT. make sure you use DTF ink. Either empty the cartridges that already come with the printer or buy new ink cartridges then fill
Hello! So the system is going show you a notification on your printer that you need to replace it. You can also check your levels on the printer as well!
I believe you can and it would be the same steps, just make sure you get DTF Ink and new cartridges or you would have to drain out the old ones and flush the ink out. They do have videos on how to do that as well.
Hello, thanks for the video, I converted everything exactly the same on my XP-15000 but unfortunately the colors are pale and not bright. Do you have any tips or could you please do a tutorial with the software you use to print (I use Acrorip 10.3)
Hello thanks for watching, I do have a video of me printing some transfers and making and shirt and in that video I go over Cadlink just a little. I have not used ACRORIP so I don’t know the settings on that software however between playing with the software settings and the printer settings you should be able to adjust the colors. Also look into another INK brand because that could be the issue to.
I'm curious to know the maintenance box you have in your hand is that the original one? Where does the waste tank go/ how do you install the other end of the hose into the waste tank? I'm sorry if this should be clear already. I'm very new to this, so any help is greatly appreciated.
HI Rebecca, the waste hose (Yellow) she put on coming from the waste tank, I have my hose coming from the back into a 2ltr plastic coke bottle. Works a treat
Hey so I had a brand epson XP 15000 that I literally bought to convert to DTF but when I was doing the modifications I thought I damaged the print head so I ran the printer with regular ink to see if it damaged or not do I have to do something before I put DTF ink
Man I'm a idiot tf is y'all's excuse???😮 I can't believe some of the ???' s uhmm also have ADHD too but I remember some of the answers to the ???' s in the comments!!! That's not good, I don't know what that makes y'all sorry to say . Something like printer illiterate. I need autocorrect just to spell !!! Well that's my rant id honestly like to help y'all cause I hate not being able to do this stuff. I'm not good with software, hardware is a joke to me
![How to Get a Developer Job - Even in This Economy [Full Course]](http://i.ytimg.com/vi/6nz8GXjxiHg/mqdefault.jpg)
![How to Get a Developer Job – Even in This Economy [Full Course]](/img/tr.png)
I'm doing this tomorrow. Picking up my XP 15000 from Best Buy in the morning. Thanks for the video.
How did it go?
@@FufuStuffI'm wondering the same.
Thank you for this video... ny xp15000 is being delivered TODAY 😊 and my CISS by Friday... so excited to get this going@
I guess I should’ve watched all your videos first before asking the question in the other. But great video.. thanks thanks thanks!!
Do you convert the ink cartridges to dtf first or after setup
Thank you. The more detail the better! I love it.
Hi Ashley, I’ve converted my xp 15000 with firmware ( InkChip) but I can’t figure out to get the white ink to work Can you help me?
Thank you so much. I am about to invest in one.
Did you add the dtf ink in before you unplug the printer to take out the rollers and install the external waste tank.
you didn't mention if we leave the initial ink until the full set up is done or if we were supposed to unplug it before it did that? Some of the comments are made as if a person knew how to initially set up the machine. I hope that it will work correctly. :)
Great Vid, well explained. Wel done and thankyou
So I saw the conversion and the chipless firmware but I can’t find the video showing the software or installing the ink.
😂 This is amazing info. I just got the Xp 1500 for d t f printing
Thank you I appreciate it!!!! Thanks for watching!
How the printer holding up
@laughnowjokelater3536 The process was a little difficult, and unfortunately, I returned the printer and got an epson 1400 instead🫣
@@leviteapparel wut made u return it
@@laughnowjokelater3536 didn't like the spuang part 😕 and I was able to afford acrorip 9.03
From here on out you need the Chipless firm installed to get it to print white? Am I missing anything else
I did the conversion with the original cartridges just like the video showed then at the end replaced with the dtf ink was that not correct? Now the printer will not recognize the refillable cartridges. Help please ☹️
Thank you, i didnt see if you put the bar back inside, or did you leave it out.
Hello so I put everything back except the rollers. Which is the black thing
Hey I have a question what is the extra maintenance box for? And do you necessarily have to buy the refill cartridges?
Hello! I recently converted my XP 15000 and I’m having some issues… Is there anyway I can get a one on one call about troubleshooting or just how to fix my issue in general? Thank You
I had my xp15000 for one week. I went 2 days without printing on it, although I did power it on both days and run printhead clean with the cleaning carts. The printer will not print anything but black and yellow. I've tried soaking the printhead in cleaning solution and it did nothing. These printers really do not want to print DTF.
question are you using the original ink that come with the printer in the begining or the dtf ink
Hey, Ash. Great vid sis! 👌🏾✌🏾What size feed tube did you use to connect to the external waste drive in your this video?
How do I stop the ink from pouring into my printer?
Where do you get the tubing for the maintenance box
Thanks for the video very much helpful.
So I converted my xp 15000 to dtf with C.I.S ...
But I was able to print the white all four other colors print when my nozzle check but not the white..
Can it be the wrong type of white..
Or any suggestions?
What software are you using?
Looks like you've got air lock.
Thank you! I got so much questions! So the tube that sticks out lol is it just for draining the ink out
I got adhd I was watching the whole video but I get lost..
😢😅
Hello,
I removed her rollers and now my prints won't eject and the last .5 inches are just a black blur, what can I do to fix? thx!!
.???? took your advice and now my printed won't feed last .5 inch of print. help plz!!
How about a rip program???? You don’t need that do print?? What program do u use
YES U NEED IT WITHOUT IT U CANNOT PRINT DTF
Hi! Can list everything u need to convert with links please.. I need to find all of it and I’m having a hard time finding the exact stuff u used to convert
She actually has them all linked in her description. That’s what I’ve been referring to, to make sure I get everything needed. 😊
Where did you get your cad for this printer?
Ur amazing so intelligent how much was it for the conversion parts in total can’t find ur link
So with the red and gray do we just add white
about how much would you say it cost in total for this whole conversion, including software
20 dollar
New to your channel I would love to see a video on how to install the ink cartridges. I am very interested in converting mine. Just wanna make sure I have all the steps.
Hello, thanks for watching my video! I will have one coming this week. I can definitely give you a run down on how to install the cartridges!
Hey Luv, I just posted my video of the ink cartridges being installed!
@@Healher_7 Thank you so much!
Where can I reach out to you? I need a little help getting my conversion setup together
Can i still convert my printer after I've already been using it as a regular printer?
Hello and thanks for watching! You should be able to still convert you just have to make sure you throughly clean out your carts or replace them with new ones.
After you convert though do not update your printer.
Hello! Amazing video! Where can I find the software?
Hi, thank you so much your video is so helpful and simple to understand. Very new to printing, currently researching printers to buy, interested in doing dtf however would still love to be able to do sublimation as well. Once this printer has been converted to dtf could you still do sublimation too? Or would I need to purchase another printer? Thanks so much!
You’re welcome and you will want to buy a separate printer for sublimation!
If I used the cartridges came with printer can I clean it out and convert to dtf
Yes you can just make sure the other ink is completely out.
what kind of dtf ink you use. film and powder
Hey thanks for watching, I use a brand called Enlite off Amazon. I will Link it down below!
amzn.to/49waFKI
Hello, new to your channel. Very interesting. Would like to see the whole process. I'm thinking about doing this. Not sure yet.
I have done a lot of research on it, i think you should go for it and the process is not so complex that you can’t do it yourself!
I couldnt find part 2
Hello so are you referring to me using Cadlink or me filling my inks?
The chip reader you listed doesnt show compatibility to the xp-15000. Did you mean to do that?
The chip reader is compatible with the 15000.
Why did you stop using the 15000
Hello new here, does it have to be a brand new print, already have one, I don’t use?
As long as you can take the wheels out that you seen me take out and change the cartilages you should be fine.
Any dealt with a paper jam where’s no paper could be found in this xp150000
Use auto paper feed software
So do you use the same ink that originally comes with the printer?
Humble.... definitely NOT. make sure you use DTF ink. Either empty the cartridges that already come with the printer or buy new ink cartridges then fill
Can you do gang sheets with this printer?
Hello if you get the role of DTF paper you probably could but it would take a lot longer and I don’t think it would hold up for a long term.
Hello - New here. How often would you say the maintenance box should or needs to be reset?
Hello! So the system is going show you a notification on your printer that you need to replace it. You can also check your levels on the printer as well!
can you convert a used EPSON XP-15000 to DTF
I believe you can and it would be the same steps, just make sure you get DTF Ink and new cartridges or you would have to drain out the old ones and flush the ink out. They do have videos on how to do that as well.
New to the Channel , How many Colors are there
Hello, there are six colors, two of them are white.
Where is part 2?
I can't find part 2 where you put the ink in
Hey so i didn’t do a video for me putting in the ink but I can guide you through it if you’d like and later this week I can do a video on it also!
Hello, I have a video up of my showing how I install the Ink cartridges!
Where is part 2
Can this be done on an Epson EcoTank ET 15000?
No, there's isn't a space for white ink.
Hi do you convert do 15000 for others?
Not unless they are local because of the cost of shipping.
Hello, thanks for the video, I converted everything exactly the same on my XP-15000 but unfortunately the colors are pale and not bright. Do you have any tips or could you please do a tutorial with the software you use to print (I use Acrorip 10.3)
Hello thanks for watching, I do have a video of me printing some transfers and making and shirt and in that video I go over Cadlink just a little. I have not used ACRORIP so I don’t know the settings on that software however between playing with the software settings and the printer settings you should be able to adjust the colors. Also look into another INK brand because that could be the issue to.
Thank you very much, I'll try it
I'm curious to know the maintenance box you have in your hand is that the original one? Where does the waste tank go/ how do you install the other end of the hose into the waste tank? I'm sorry if this should be clear already. I'm very new to this, so any help is greatly appreciated.
HI Rebecca, the waste hose (Yellow) she put on coming from the waste tank, I have my hose coming from the back into a 2ltr plastic coke bottle. Works a treat
❤❤❤❤❤❤
Hey so I had a brand epson XP 15000 that I literally bought to convert to DTF but when I was doing the modifications I thought I damaged the print head so I ran the printer with regular ink to see if it damaged or not do I have to do something before I put DTF ink
Can you do mine for me ?
Man I'm a idiot tf is y'all's excuse???😮 I can't believe some of the ???' s uhmm also have ADHD too but I remember some of the answers to the ???' s in the comments!!! That's not good, I don't know what that makes y'all sorry to say . Something like printer illiterate. I need autocorrect just to spell !!! Well that's my rant id honestly like to help y'all cause I hate not being able to do this stuff. I'm not good with software, hardware is a joke to me
Your attention to detail is outstanding! Curious about DTF printing for your next project? @fastdtftransfer
where is part 2?