queen!! been doing HTV for a few years and finally starting the journey of DTF. converting xp15000 and beginning with acrorip 10.7 and inkscape as my designer. I subscribed for your knowledge! thank you!
i followed your steps to convert and install but when I go to print my white ink doesn't appear on the dtf paper. Is there a step a missed? Very helpful videos!
I have a question please help. I did my first setup with the original cartridge, I took them out after the 10 min installation. Do you think I messed my printer up? By possibly mixing of the inks.. I haven’t purchased my dtf empty cartridges as of yet. But do you think i affected anything?
What about the chips on the cartridges, updates for printer. Mine is having issues with the regular ink cartridges. Love your videos on the 15000, and it's easy to follow. Thank you for that.
Super helpful video! 1 question though, when you are inserting the new cartridges is the computer still on or do you have it unplugged like ive seen in some other videos? Thanks!
Wow thanks for all The information! What are your settings on the actual printer its self and what are the settings on espon printer/scanner settings on the computer and what software do you have the color / white %? I also have the same ink do you have a icc profile you like for this ink?
Hello, on the first video you redirected the hose for the waste box, so is the waste box now on the outside and the waste box initial location was in the front, will that one stay there without the hose connected for the purpose of programming? And what does the external waste box look like?
Silly question - how will you know if the ink levels are low? Is there a system you have that will alert you? Can you also do a video on your print cleaning routine?
Hello and no I don’t think you asked a silly question, one of the ways to know if the ink is low is when you go to print your image will either not print correctly or fade out. Another way to know is when you do your nozzle check the same thing will happen the print lines will not be there or you’ll have breakage in the lines. Also when you go to open your printer to do your cleanings you will see that your ink is low and lastly if you do a ciss system that one is much more visible to see that you are running low. I hope this helps and I will try to do a cleaning in my next video!
No you want to replace those carts with DTF or you can drain those carts and put to DTF ink in them. Once that’s done then you can run the test print. Also you’re going to do the chipless setup after you covert the printer.
Hey Ashley . Good day I need your help I brought my Epson EP 15000 2 days ago I'm having issues with the printing... My image will come out super light and no white ink on the back of the image... Please help
Good afternoon I just brought an epsonx15000 I actually im trying to convert it but i poured out all the sublimation ink which was inside the cartridge now i can’t refill the cartridge, the bag is close Please can someone tell me what to do to fix it !?
I did a few prints with OEM ink before switching over to dtf ink in new carts without cleaning . Then I didn’t recognize that Bosc was clogged and did head cleanings till tank was full I have new waste tank coming but once I clean printhewd really really good I should be ok ?
I didn’t do a full video on Cadlink because I’m still figuring that one out but I did a brief tutorial in one of my conversion videos! Thanks for watching!
Hey luv thanks for watching my video, if you go to my channel where all my videos are there is a video I did where I converted the xp 15000 and in that video I show how I created the waste tank.
First question, do you have to have Cadlink or a specific software to print DTF, or can Inkscape be used? Second question, how does the printer or software know that white ink has been put into the grey and red cartridges, what if the image needs red or grey will those colors print as white?
Yes you do have to have Cadlink or Acro and the printer is going to print whatever color you have in the cartridge, so even though it’s labeled red and grey and you put white ink in the system is going to use it because that’s what’s in it. It would be just the same if you used any other color in that slot, that’s why you have to triple check where you insert your ink.
What do you do after you have installed the waste tank and put the ink into the refillable cartridges? Can you then print. I have installed the chipper’s firmware as well
I believe you have to let you print do like a cleanse with the ink first, I forgot what it’s called. What type of printer do you have and did you remove your rollers yet?
Have you tried a CISS with dampers? I hear those refillable cartridges leak and flood the printer often unless used with a CISS system with the dampers installed. I searched UA-cam“ciss xp 15000 flood” and haven’t had any flooding since using that CISS. Edit: Here’s the video…. ua-cam.com/video/jUX769JoRO4/v-deo.htmlsi=iF0n3vtWZf8sEkle
queen!! been doing HTV for a few years and finally starting the journey of DTF. converting xp15000 and beginning with acrorip 10.7 and inkscape as my designer. I subscribed for your knowledge! thank you!
Thank you so much, I appreciate that!
i followed your steps to convert and install but when I go to print my white ink doesn't appear on the dtf paper. Is there a step a missed? Very helpful videos!
I have a question please help. I did my first setup with the original cartridge, I took them out after the 10 min installation. Do you think I messed my printer up? By possibly mixing of the inks.. I haven’t purchased my dtf empty cartridges as of yet. But do you think i affected anything?
Ink running on film on my dtf printer. Any recommendations?
Hi Great tutorial videos! Where you find the bigger cartridges
What about the chips on the cartridges, updates for printer. Mine is having issues with the regular ink cartridges.
Love your videos on the 15000, and it's easy to follow. Thank you for that.
Super helpful video! 1 question though, when you are inserting the new cartridges is the computer still on or do you have it unplugged like ive seen in some other videos? Thanks!
for occasional use would recommend me Ciss system or just simple cartridge ?
Wow thanks for all
The information! What are your settings on the actual printer its self and what are the settings on espon printer/scanner settings on the computer and what software do you have the color / white %?
I also have the same ink do you have a icc profile you like for this ink?
Hello, on the first video you redirected the hose for the waste box, so is the waste box now on the outside and the waste box initial location was in the front, will that one stay there without the hose connected for the purpose of programming? And what does the external waste box look like?
Hello just wanted to know were to get the blank cartridges from
@@yolandagriffin5794 Amazon
Silly question - how will you know if the ink levels are low? Is there a system you have that will alert you?
Can you also do a video on your print cleaning routine?
Hello and no I don’t think you asked a silly question, one of the ways to know if the ink is low is when you go to print your image will either not print correctly or fade out. Another way to know is when you do your nozzle check the same thing will happen the print lines will not be there or you’ll have breakage in the lines. Also when you go to open your printer to do your cleanings you will see that your ink is low and lastly if you do a ciss system that one is much more visible to see that you are running low. I hope this helps and I will try to do a cleaning in my next video!
How do I convert my cartridges to be able to fill them with DTF ink?
Hey, do you do the print test and alignment with the cartridges that come with it first then change to the the chipless?
No you want to replace those carts with DTF or you can drain those carts and put to DTF ink in them. Once that’s done then you can run the test print. Also you’re going to do the chipless setup after you covert the printer.
Hello my Maschine find Not the color under the ink is no Chip what can i do😮😢
Hey Ashley . Good day I need your help I brought my Epson EP 15000 2 days ago I'm having issues with the printing... My image will come out super light and no white ink on the back of the image... Please help
Good afternoon
I just brought an epsonx15000 I actually im trying to convert it but i poured out all the sublimation ink which was inside the cartridge now i can’t refill the cartridge, the bag is close
Please can someone tell me what to do to fix it !?
What about chips for cartridge’s
Seriously lol chipless doesnt support mac
I did a few prints with OEM ink before switching over to dtf ink in new carts without cleaning . Then I didn’t recognize that Bosc was clogged and did head cleanings till tank was full I have new waste tank coming but once I clean printhewd really really good I should be ok ?
Did you do a video on Cadlink
I didn’t do a full video on Cadlink because I’m still figuring that one out but I did a brief tutorial in one of my conversion videos! Thanks for watching!
Can someone refer me to a good quality ink for an Epson xp 15000?
With what percentage of white and color do you print your designs in acrorip?
How does your dtf print white?
I would have liked to see how the waste tank was setup
Hey luv thanks for watching my video, if you go to my channel where all my videos are there is a video I did where I converted the xp 15000 and in that video I show how I created the waste tank.
First question, do you have to have Cadlink or a specific software to print DTF, or can Inkscape be used?
Second question, how does the printer or software know that white ink has been put into the grey and red cartridges, what if the image needs red or grey will those colors print as white?
Yes you do have to have Cadlink or Acro and the printer is going to print whatever color you have in the cartridge, so even though it’s labeled red and grey and you put white ink in the system is going to use it because that’s what’s in it. It would be just the same if you used any other color in that slot, that’s why you have to triple check where you insert your ink.
Were does the white ink go in the red and Grey cartridges?
Yes the white ink goes into red and grey just make sure you label them! Thanks for watching!!!
Why do you put white in the red and grey cartridges? And how does the machine know?
How does the machine know to print white
You have to download a rip software. @@selenaj1397
Hello help my ink are not fulling up
What do you do after you have installed the waste tank and put the ink into the refillable cartridges? Can you then print. I have installed the chipper’s firmware as well
I believe you have to let you print do like a cleanse with the ink first, I forgot what it’s called. What type of printer do you have and did you remove your rollers yet?
Have you tried a CISS with dampers? I hear those refillable cartridges leak and flood the printer often unless used with a CISS system with the dampers installed. I searched UA-cam“ciss xp 15000 flood” and haven’t had any flooding since using that CISS.
Edit: Here’s the video…. ua-cam.com/video/jUX769JoRO4/v-deo.htmlsi=iF0n3vtWZf8sEkle
Need help