Using and Maintaining a Chain Saw - Echo CS-590 How To
Вставка
- Опубліковано 7 лип 2023
- Greg of Greg Rents demonstrates how to use a Chain Saw and perform basic service checks using an Echo CS-590 Chain Saw. Follow along as he checks the Bar Oil, discusses the fuel we prefer to use, checks the air filter, checks the chain, shows you how to identify important parts of the equipment to determine the size chain and accessories you need, how to keep your chain lubricated, and what old school hillclimbing has to do with starting a chaing saw, etc.
Greg Rents is an Echo Outdoor Power Equipment Dealer - we offer their equipment for sale and rent. In addition we have certified repair technicians on site as well as parts and accessories to keep your equipment running.
If you have any questions about how to use our equipment please give us a call at (805) 649-2590.
For more information about Greg Rents' available equipment visit
www.gregrents.com
Follow us on Facebook and Instagram
/ gregrents
/ gregrents - Авто та транспорт
Never let it high idle with the chain brake on its putting alot of pressure on the clutch as soon as it cranks bump the throttle
Great video ive been running/using these 590 for close to 10 years . Everything you covered i went throu in id say the 1st 5 years besides the clutch cover being plastic and eventually getting beat up warped etc causing the chain adjuster to it better mean strip out kind of causing the chain to not be properly adjusted they are excellent and affordable saws !!!
HeLp..I was running my CS590. And I took down a 75 foot red oak. I was cutting it into 16 inch logs. And I was up near the last cut and it died on me and would not restart. Yes it was a warm day. But i've had this problem since I bought it a year ago. It's hard to get started and it dies out after running a while, won't restart... This is the new version of the c s 590. I have another one from a couple of years ago and have no problems with it at all.... I just run a 20 inch Bar on one, and a 24 on the other.
For a little bigger trees
Thanks for sharing this.
Side note whenever you change chains blow out grease and clean the bar i just to flip it every time to helps to prevent the discoloration, also let the saw cool down between fuel fill ups this also helps prevent costly repairs and will extend the life of the whole saw !!
Stay safe out there fellow arborist's !!!
Thanks for chiming in!
I never had a 590/620 clog up the bar oil port, the Timberwolf laminated bars suck the rails are soft, I always drill the tear drop oil holes. Sharp chain is most important on any saw!
Excellent point, thank you for the input.
Greg, great vid. I learned a lot. If there is fuel seeping out of the compression valve is that because it’s flooded or an issue with that compression button?
MUY BUEN VIDEO.....MUY BUENA LA EXPLICACION ME SIRVE TODA ESAS RECOMENDACIONES QUE DICE AQUI ACERCA DE LAS MAQUINAS Y COMO REVISAR TODAS ESAS PARTES IMPORTANTES DE LAS MAQUINAS....GRACIAS POR SU VIDEO....ME SIRVE DE MUCHO GRACIAS
Great stuff!
I'm in Oklahoma. Which model and chain do you recommend to take out a lot of red cedars on inherited, neglected 120 acres? I've been primarily focused on blackberry briars. About to start taking out cedars.
Maybe ask at your local shop my friend.?
You lost me when you said ethanol turns to corn syrup!
Ethanol-blended gasolines can cause some corrosion issues. The thing to remember is if you're going to be storing the chain saw, say all winter, it's best to store it without this fuel inside.
I gotta say that it can be slightly more involved than your basic 3 stroke sharpening technique. Works perfectly in a perfect cutting scenario but may want to look closer. It might need more honing on any given tooth if it's missing a chunk out of it. And yeah man. No primer bulb on this one
He lost me when he said higher octane makes more power. 😂😂😂
@@Idahoprepper71
What mixing lacquer thinner with diesel fuel,
Will that work?
California...and he didn't say "dude" once.....