I have watched this owner argue on 10 separate threads in Club AU about how dope this vehicle is... I have seen it push limits on other Barra swaps when racing, some of them blew up trying to keep up... I have also seen it keep up and slightly gap a 1000hp V8 AMG Mercedes.... I have seen this car for sale for nearly 50k... (if memory serves, It may have been a joke.) This car is a living legend.
yep like bonzi, lol:) Now days like theres no way you can get a car doing 9's and it cost only 2K, even if you do it all by yourself, engine mods auto mods, tailshaft, diff internals, diff splines, then E85 conversion, what else, i yes wheels and tyres, intercooler and then the tune, which has to be done outside your own workshop unless you have a dyno cell built into your own workshop, its going to cost you at least 10 to 20K all up if you paid someone to do a AU up with a barra and BF running gear for drags, also noticed no cage, hum so should legally not be allowed on the track full stop?
If you don't count the turbo in the cost this is a genuine 2k barra running mid nines, that is actually insane. I don't think anyone counts gearbox, suspension and all in the 2k barra cost meme just the pure engine.
Cam has pieced the ex-taxi together himself where it’s now running single digit ET’s thanks to a trusty green top Barra engine. *Get your track gear!* 👉 shop.fullboost.com.au If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button.
Please do a 2k breakdown . Id like to see what the differences would be. I run chi head Cleveland & that was much more than 2k , kinda wish i had imported a barra instead of 3.5k heads
I tell ya what, for a clapped out ex taxi that hasn't had diddley squat spent on it, that's not too shabby .... That's a lot a go for very little money.
@@Gooie69 maybe.....thinking of keeping it total stock except a stoker crank, stronger rods and better pistons, serious headwork and solid cams, upgraded timing system, oil pump and sump, injectors, fuel rails, fuel pump, inlet and exhaust manifolds, turbo and oil pumps, intercooler...........still stock but
@@paulcoote3094 if you're going to that much trouble maybe look at the square bore modification. You press in square cylinder sleeves and square pistons with gapless hypodezmerpenzine rings. I think it's cosworth that do the kit. Pretty expensive but well worth the money.
I paid $300 buck's for my AU from my brother inlaw paid the pink slip and rego the car is still going strong and still my daily all up cost me a couple hundred more with small chips
i love the barra but if this motor was available back in the early nineties we all would have been whooped in drag racing when 11-13 sec passes were fast. for a street racer
Why didn't you just buy a BA gas car, would off been cheap as chips back then. Save you all the head Ake of the engine and wiring swapping. I bought my BA gas car for $900. I want to build it like yours, inspiration from you. Congratulations on this fast build.
yep like bonzi, lol:) Now days like theres no way you can get a car doing 9's and it cost only 2K, even if you do it all by yourself, engine mods auto mods, tailshaft, diff internals, diff splines, then E85 conversion, what else, i yes wheels and tyres, intercooler and then the tune, which has to be done outside your own workshop unless you have a dyno cell built into your own workshop, its going to cost you at least 10 to 20K all up if you paid someone to do a AU up with a barra and BF running gear for drags, also noticed no cage, hum so should legally not be allowed on the track full stop?
This makes the Mexican Hoon Cartel weak at the Burrito's.
@Louie Dega No they are not. They were made by Yamaha in Japan.
😂😂😂😂
I'm a simple man.
I see FullBOOST upload, I click watch.
Simpleman.......sounds like s great name for a great song by a legendary bunch of ol skool blokes
That’s a wicked laugh on Spiro😂. Also wicked Au 👌
I have watched this owner argue on 10 separate threads in Club AU about how dope this vehicle is...
I have seen it push limits on other Barra swaps when racing, some of them blew up trying to keep up...
I have also seen it keep up and slightly gap a 1000hp V8 AMG Mercedes....
I have seen this car for sale for nearly 50k... (if memory serves, It may have been a joke.)
This car is a living legend.
50k was a joke
With covid tax going on
The arguments in club au is mainly just a pistake between him and his mate lol
yep like bonzi, lol:) Now days like theres no way you can get a car doing 9's and it cost only 2K, even if you do it all by yourself, engine mods auto mods, tailshaft, diff internals, diff splines, then E85 conversion, what else, i yes wheels and tyres, intercooler and then the tune, which has to be done outside your own workshop unless you have a dyno cell built into your own workshop, its going to cost you at least 10 to 20K all up if you paid someone to do a AU up with a barra and BF running gear for drags, also noticed no cage, hum so should legally not be allowed on the track full stop?
Best car on fullboost i love so far this year...cheap and nasty
An fast.
@@shreckm6470 yep fast as go the cheap barra
Dom: " You owe me a 10-Second car"
Cameron: "Got this ghetto aF ex-taxi.'
Lmfao never seen any ford do 10sec quarter times but I’ve seen them do 10 min times
@@cokeaddict1663you got no eyes?
@@kiwi8. No I’ve got 2 of them 4 if u count my Oakleys 🤪🤪
If you don't count the turbo in the cost this is a genuine 2k barra running mid nines, that is actually insane. I don't think anyone counts gearbox, suspension and all in the 2k barra cost meme just the pure engine.
Love it. He needs to go stage 3 taxi tune, and put beaded seat covers! 😄
Don't forget the air freshener on the rearview mirror... Is there an Old Spice scented one?
Done deal I will look for some
@@bvward don't u think Lynx is more the AU scene 😂
@@johnkraft7461 Can't say, I'm hiding in New Jersey. Closest thing we have is an Outback Steakhouse ;)
@@bvward Does that smell like Mel Gibson?
this thing absolutely chopped my 1jz is200 at roll racing and is making me rethink the build project LOOOOOOOOOOOOL!!!
It's a freaking 4 liter compared to a 1.5 liter 😕
@@MRMAN-wb1tv a 1z is 2.5L
Cam has pieced the ex-taxi together himself where it’s now running single digit ET’s thanks to a trusty green top Barra engine.
*Get your track gear!* 👉 shop.fullboost.com.au
If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button.
Spewe'n ya should have put 2k barra build in the title of the video
How hard was the intercooler to fit I have a au3 xr8 that needs a cooler any help would be great
Great fun vid . I love the budget builds that punch hard , and yeah you do have to be comfy running 9s .
saw this running at GTR festival, absolute weapon. It’s properly quick and absolutely dialled
This is the 2k barra, complete with rust, the gingers need to merch this legend
Barra swapped AU, T56, 50 gallon boot mounted tank... Perfect Cannonball Run car.
It's doesn't have a t56
This car needs its own fullBOOST t-shirt
Second that
I Third this motion..
Excellent choice of music
Saw this car today at All Ford day in Eastern creek, awesome
What a car the mighty au 😝
Smiled the entire vid
Just goes to show what parts you actually need
That was my point to this build
And I still pushing it
Oh man that Kendal deck in the background is gold.
I was smiling all the way through this... Maaaan! This Barra will properly f-up some "supercars" 🤣🤣🤣🤣 and seven years running, wow! Great one guys 👍🏻
Want to see me race super cars
Check out videos on
Camsbarras
Please do a 2k breakdown . Id like to see what the differences would be. I run chi head Cleveland & that was much more than 2k , kinda wish i had imported a barra instead of 3.5k heads
Love an AU, almost as good as E series!
It's been a long time since a C4 has been mentioned from my perspective
22psi on stock internal 1m km engine... mad respect for the barra. Hideous interior in the au though.
You shut your damn mouth. ;-)
Gotta admit the Fairmont interior is nice though
Poor old Scotty from Carnage is contemplating life now.
Yea I lost interest in the turbo taxi.. too much fucking around for 10 second passes..
🤣🤣
Mate that was the first thing that went through my mind he must be thinking WTF.
Yea but is his still on gas? This is on e85 though
I saw one in Penrith like this one doin wheelies 😂
2k Barra, f*CK yeah. Aussie As Au
I tell ya what, for a clapped out ex taxi that hasn't had diddley squat spent on it, that's not too shabby .... That's a lot a go for very little money.
CAM'S BARRAS!!!
Reminds me of my old Barra with the the oil the exhaust manifold because the head studs are stretching to the limit.....
Stock standard... from the wrecking yard... that barra was born to be blown...
Very well sorted car for how little has been done
Just goes to show you can spend thousands on a car but if you don't have the seat time...
Did he say it has the standard oil pump and it's been running for 7 years 😦
Yep never been removed from block
Oil pump gears r over rated ,stock gears for life
Any footage of the burgandy mx83 cressida seen at 3:07?
The boys used to laugh at the 2k Barra meme ......... Not laughing now eh boys 😉
AU's did not come out with Barr's full stop, intech engine and not the barra?
2:41 I want that 2k Barra sticker with the Mexican guy on it lol
Here it is :)
shop.fullboost.com.au/collections/stickers/products/2k-barra
Where can I find the exact details of this build? I’m looking to build a turbo petrol converted lpg barra
On the periodic table of elements, the symbol for Gold is Au
Gotta love the cheap, fast and nasty.
Thats Awesome
Love it 👌
Can someone tell me how to put valve springs into a barra without opening it please!!!!!!!!!!!!
Try dropping them in the oil fill hole. They should eventually settle in there somewhere.
@@Gooie69 maybe.....thinking of keeping it total stock except a stoker crank, stronger rods and better pistons, serious headwork and solid cams, upgraded timing system, oil pump and sump, injectors, fuel rails, fuel pump, inlet and exhaust manifolds, turbo and oil pumps, intercooler...........still stock but
@@paulcoote3094 if you're going to that much trouble maybe look at the square bore modification. You press in square cylinder sleeves and square pistons with gapless hypodezmerpenzine rings. I think it's cosworth that do the kit. Pretty expensive but well worth the money.
@@Gooie69 but it's stock yeah because Cosworth did Ford shit? Lol
@@onedayiwillmakesomecontent can't tell is serious or joking?
Where do I get the loom?
Wow another cracking car and video you guys are spoiling us have another like
UP THE AU
More like this!
Curious, 9’s with no cage? Does it meet the build dates of real street? Or Do you just get booted everytime? Haha
Booted every time
And have to wait for next meet cross my fingers I get back inn
@@camsbarra2480 I saw a 9.7 at GT-R festival 😳
We are taking to melbour when covid pisses off
I got a 5k intech still has some rust
How much does this setup cost total? @fullboost
Under 15gs
3:26 left lane needs to learn how to shift 😂
I paid $300 buck's for my AU from my brother inlaw paid the pink slip and rego the car is still going strong and still my daily all up cost me a couple hundred more with small chips
Awesome budget performance build, and kudos for using the ugly "hey you" when BA's are dirt cheap now.
Au would be lighter and the IRS hasn't got the shit diff bush setup
AU falcons do amazing things ask Craig lowendes
Any relation to Craig Lowndes?
@@Gooie69 no but Craig once apon a time drove one it was black with a silver falcon down the side and boy it was fast
Especially when he was at the wheel
@@Deanozdirect hmmmmm I've never heard of Craig Lowendes. Is he famous?
@@Gooie69 okay my spelling is bad but you know who Craig lowness is
No no is serious y love it the motors ford barra 4L
Dam....that thing moves. ...can u build mines
Facebook
Au barra turbo
Is my page
Search Cape Brewing Co. Your CBC logo is almost identical
i love the barra but if this motor was available back in the early nineties we all would have been whooped in drag racing when 11-13 sec passes were fast. for a street racer
Few more weeks it will weigh 1550
Real 2k barra exists🤣🤣
Fullboost - go one better than Elon Musk and start a go fund me to put this AU into orbit - do it for Straya 💪
Go Ford aussy...I like holden also...Bugger..
2k barra !!!!!! with the car
Fuck thats epic
When you guys come to Sydney again.
Jamboree 👍
Why didn't you just buy a BA gas car, would off been cheap as chips back then. Save you all the head Ake of the engine and wiring swapping. I bought my BA gas car for $900. I want to build it like yours, inspiration from you. Congratulations on this fast build.
Cheap fun
How does it run 9s with only 410kw wow
Good driver
@@camsbarra2480 not hard to launch an auto and floor the gas 😅
yep like bonzi, lol:) Now days like theres no way you can get a car doing 9's and it cost only 2K, even if you do it all by yourself, engine mods auto mods, tailshaft, diff internals, diff splines, then E85 conversion, what else, i yes wheels and tyres, intercooler and then the tune, which has to be done outside your own workshop unless you have a dyno cell built into your own workshop, its going to cost you at least 10 to 20K all up if you paid someone to do a AU up with a barra and BF running gear for drags, also noticed no cage, hum so should legally not be allowed on the track full stop?
the intake pipe on the turbo isnt even on properly, free highflow mod
Was I the only one that noticed the intake pipe was loose :p
so lighter car by a couple of KG compared to the BF and BF running gear, lol :)
It makes you wonder why you would spend 30k plus on a built v8 to get the same numbers?
I like v8's but in this no bullshit drag numbers game , you'll be paying a lot for a better sound !
Nice!
2k the world
Very nice really love you
Love the music
Wow looks mint for an AU 👌🏼
Im Just jealous 😔
Question that hook up, is it just the dif letting the left wheel hook earlier than the right?
All stock
@@camsbarra2480 Factory LSD? Big turbo Borgy 86 3.45 centre or a stocky 2.92 setup? The peasants want to know.......
3.45 irs
Stock lsd
Unopened
@@camsbarra2480 Sweet, cheers. I guess the center is out of a BA xr turbo or xr8.
All au
Vl turbos was doing this back in the 80,s and 90,s , ford got so upset they finally had to stop there fans crying
Would’ve been infinitely more exciting if it ran on LPG
AN AU FALCON
Sick transbrake cuz 😂
Handbrake lol
@@camsbarra2480 ayyeeeee! Sick build brother, I was just playing bout that! Very impressed
@@camsbarra2480what size convertor?
Can't even buy a turbo manifold for 2k now SMH
Rusty AU equals weight reduction
2k Barra mate
I wish I was straylian
Check out more videos @
Camsbarras
You tube page
Ghetto is a proper Jet-O.
Classic. Should be AU f#%@ your LS.
Celica nose
Gearbox cost more than the whole car
Haha mint
2k barra
5000 gearbox
This car would be perfect for stooge cruising. Stooge cars 10x the price all night lmao. Albeit you have to be in an AU all night but..
disappointed no xu3 yellah
That is hella abused
*So a Jewish person in Germany built this?*
👍🏼👍🏼👍🏼👍🏼🍥🍙🍥🇹🇭
Once again how is he running low 10 and 9 second passes with no tech???
I have to get out of it after the 1/8th so I don't get booted!
Irha rules can run 9.9999
I get one shot every event before getting booted
@@camsbarra2480 interesting, at Willowbank if you run to fast with no tech you get booted until the car is techd and not allowed back until it is
Please tell me this cost $2000 🤣
Nearly 10k total I believe
@@Cheato 20k was 2k a year ago. Honestly Id buy one if I thought I could get this from an old taxi plus 10k.
2k barra
The barra is the engine it only cost me $1k to buy n do valve springs
@@camsbarra2480 fark nice work
Makes me look again at the green top I have sitting unloved on the engine stand that cost me $75 as a runner! 😄