Spreading factor is related to how many chips are used to encode one bit. When the SF is n, one bit is encoded as 2^n chips ("bits"), so it takes much longer, but it is less susceptible to noise and therefore also improves range.
868 MHz is in the public service and LMR portion of the 800 MHz trunking band in the USA, and requires an LMR license with 800 MHz classification. 800 MHz is prime real-estate for public services, and wireless providers, the FCC is very protective of that band since it's a money maker for them.. IDK if I'd be using those exact models for anything, I'd opt for a different version on a different band.
Don't know much about lora modules but i like how it uses a simple serial connection. Depending on the range and power consumption it would be good or bad for "out in the field" sensors. Very glad u didn't forget about I2C also!
It would be good to have your code available in a file, either an .ino file or a text file, which would save the trouble of trying to copy it from the screen. Thanks!
Great video! Quick question: I have Arduino Uno R3 (and I'm not an electronics expert). My Uno doesn't have a D3 pin. Should I use A3 pin? Thank you kindly!
Arduino operates at 5V logic level, I've tried using voltage dividers and pull-up resistors to make it compatible with the 3.3V voltage of the SX1281 chip, but I've failed. I couldn't get any signal on the serial port. Can you guide me on how to make them perfectly compatible using only resistors?
Could this LoRa be used like the olden times LoRAN? Three transmitters and one moving receiver. The receiver measures signal strenght from each transmitter for location? Seem like similar principals. Can't wait for the next exciting episode
Thanks for the video, I now understand LoRa better and think it may provide an answer. Help, I need to replace a VERY SHORT range 433Mhz remote Gate Opener. I need at least a 150 Meter range (would like 300+ M), currently have about 10m with an exterior antenna. I’m using an ESP-32 to ‘assist’ the Gate Opener Control board with remote sensing and operations (house is 160m+ away) I can Open, Close, Hold Open the gate from my home network (and more). I thought I could use a D-1 mini in the car with a LoRa transmitter and a simple push button. The LoRa receiver would connect to the existing ESP-32 in the Gate Opener box. Questions: 1-Can I encrypt the transmission? 2-How can I use the received transmission on the ESP-32 to trigger an event (opto-isolated relays I have) 3-Can the ESP-32 LoRa receiver transmit a CONFIRMATION back to the remote LoRa (D-1 Mini) in the car? (eg. buzzer/beep/LED blink) Any suggestions or direction to another video/Instructables tutorial would be appreciated. Thanks
Hi; Great video.Just one question ,can this modules be used to built a whetaher station ? It's possible to transmit variables as temperature and humidity? Rgds
Bro great project I was followed all this process as shown in u r video but I have some problems only address is saved in the memory of rylr896 parameters and bandwidth not saved after disconnected from pc and reconnect module with pc all commands are default And I m not getting the range above 100meters pls bro help me
your mic when on the screen recording is way too loud audio quality is very bad, lots of clippage, u need to lower the gain and then maybe do some compresion / gate action to get rid of background noise all the love
learnelectronics If you check can you help me please? i am 21 years old college student. My department is computer engineering and this 2 weeks i do my summer internship. I should send to lora to lora and after to send Ttn the information. I have sx1278 LoRaduino s, they said i work with 433mhz not 868, i search about ping pong code for fit these things. If you have or can find this code, can you send me a link? Atmega328P sx1278, ping and pong code, send and receive. In Europe the send must 868mhz, if you live in US , you use 901Mhz band. I must use 433mhz, that's my mission
Instant sub, most people would never even care to thank somebody who sent them a pack of resistors, you sir are a gentleman and a scholar.
Spreading factor is related to how many chips are used to encode one bit. When the SF is n, one bit is encoded as 2^n chips ("bits"), so it takes much longer, but it is less susceptible to noise and therefore also improves range.
868 MHz is in the public service and LMR portion of the 800 MHz trunking band in the USA, and requires an LMR license with 800 MHz classification. 800 MHz is prime real-estate for public services, and wireless providers, the FCC is very protective of that band since it's a money maker for them..
IDK if I'd be using those exact models for anything, I'd opt for a different version on a different band.
Uh, wasn't that a 3.3v device that you connected to the 5v source? Did I miss something?
I know I am pretty off topic but do anyone know of a good website to stream newly released tv shows online ?
@Rodrigo Luka I would suggest Flixzone. You can find it by googling =)
Are you sure it is OK to power those with 5v?
By specs it's up to 3.6 v.
Also you will need a logic-level converter as well.
5v is no good
In the datasheet the VDD is listed as max 3.6V and you hook it up to 5V. Is there a risk to fry the board this way?
That's the max voltage to the chip itself. It goes through a 3.3 regulator on the board first
Don't know much about lora modules but i like how it uses a simple serial connection. Depending on the range and power consumption it would be good or bad for "out in the field" sensors. Very glad u didn't forget about I2C also!
Sorry one more question: Does this setup allow bidirectional communication? Thank you so much! :)
Is it the same module for sending and receiving?
It would be good to have your code available in a file, either an .ino file or a text file, which would save the trouble of trying to copy it from the screen. Thanks!
Please do you know a lora module with an integrated antenna for my arduino nano 33 ble sense board ?
Has anyone got the LoRa arduino library to work with the llcc68 900MHz modules? I got the spi working but no wireless is connecting to each other.
May I ask how could you send data using this lora module from one arduino to another one... mine cannot work at all and i am really confused
Great video! Quick question: I have Arduino Uno R3 (and I'm not an electronics expert). My Uno doesn't have a D3 pin. Should I use A3 pin? Thank you kindly!
Your Arduino R3 has digital pins 2-13.
Arduino operates at 5V logic level, I've tried using voltage dividers and pull-up resistors to make it compatible with the 3.3V voltage of the SX1281 chip, but I've failed. I couldn't get any signal on the serial port. Can you guide me on how to make them perfectly compatible using only resistors?
I'm wondering if you have auto input volume switched on in your audio recorder? There's quite a lot of noise while you are talking.
Its the air conditioning
At 7:51 you mention 5V. As far as I know, the LoRa modules are not 5V, they are 3.3V.
I like that board the uno is mounted on. What search term(s) do you find those with on eBay??
Could this LoRa be used like the olden times LoRAN? Three transmitters and one moving receiver. The receiver measures signal strenght from each transmitter for location? Seem like similar principals. Can't wait for the next exciting episode
What’s your patreon link? Would like to donate
This Reyax modules works with 433 , 868 and 915 . How would I know which frequency I am working with
Ebay link doesn't work :(
Thanks for the video, I now understand LoRa better and think it may provide an answer. Help, I need to replace a VERY SHORT range 433Mhz remote Gate Opener. I need at least a 150 Meter range (would like 300+ M), currently have about 10m with an exterior antenna. I’m using an ESP-32 to ‘assist’ the Gate Opener Control board with remote sensing and operations (house is 160m+ away) I can Open, Close, Hold Open the gate from my home network (and more). I thought I could use a D-1 mini in the car with a LoRa transmitter and a simple push button. The LoRa receiver would connect to the existing ESP-32 in the Gate Opener box.
Questions:
1-Can I encrypt the transmission?
2-How can I use the received transmission on the ESP-32 to trigger an event (opto-isolated relays I have)
3-Can the ESP-32 LoRa receiver transmit a CONFIRMATION back to the remote LoRa (D-1 Mini) in the car? (eg. buzzer/beep/LED blink)
Any suggestions or direction to another video/Instructables tutorial would be appreciated. Thanks
Hi; Great video.Just one question ,can this modules be used to built a whetaher station ? It's possible to transmit variables as temperature and humidity? Rgds
yes you can transmit variables
@@learnelectronics Thanks a lot for your fast answer .Do you a sketch as example ? Thanks again
Bro great project I was followed all this process as shown in u r video but I have some problems only address is saved in the memory of rylr896 parameters and bandwidth not saved after disconnected from pc and reconnect module with pc all commands are default
And I m not getting the range above 100meters pls bro help me
Greetings sir!
Is This Lora module is compatible for multi point transmission
Great tutorial! One question. Am i able to use it as 2 way communication?
Yes, they are transceiver modules, so they can transmit and receive
This modules VCC input, not more than 3v3. Why you use it on 5v?
For the range check, I would like to see a test setup where the antennas are about 1m (hip height) from the ground. :)
In todays video the xmtr is on my desk...about 3 feet off the ground and the rx is in my car.
Can you have more than one device connected to a single Arduino ?
Depends on the Arduino. The Uno only has 1 serial port. But the mega has two (maybe 3, can't remember)
Why with AT commands? There is not a better solution? Thnks for sharing
There are libraries. But i like the AT commands, reminds me of configuring dial up modems
Thank you for the great instruction video, it really help me!
Trying to make my first LoRa device. Good information and instructions, thanks.
can you please share the pdf
Merci gros tu gères la fougère
Tks for the vid!!! Super work!!
Great video! very well explained! Thanks mate!
Thank you.
your mic when on the screen recording is way too loud audio quality is very bad, lots of clippage, u need to lower the gain and then maybe do some compresion / gate action to get rid of background noise
all the love
Great video
i have DRF1276 at commands is same ? thank you for this istruction. You are the king :)
are you heard LoRaduino? i use that many time
No I will check it out
learnelectronics If you check can you help me please? i am 21 years old college student. My department is computer engineering and this 2 weeks i do my summer internship. I should send to lora to lora and after to send Ttn the information. I have sx1278 LoRaduino s, they said i work with 433mhz not 868, i search about ping pong code for fit these things. If you have or can find this code, can you send me a link? Atmega328P sx1278, ping and pong code, send and receive. In Europe the send must 868mhz, if you live in US , you use 901Mhz band. I must use 433mhz, that's my mission
awesome..
Where's your wish list???
There's a link in the channel's About page.
Your not playing about the weather here in Ohio mother nature is always drunk
The Sound is very bad, you really need to deal with this. Its unbearable listen to.
Then dont listen. Buh-bye
@@learnelectronics lol
God you absolutely need to NOT use a gate on your audio. Gave me a headache listening to this.