⚠ This video took a long time to make if you would like to buy me a coffee to say thanks, link below: ☕ PayPal: paypal.me/sdaspay Patreon: www.patreon.com/techstudycell
Thanks for sharing. The LORA library for Arduino failed for me, but you proved that it was not even needed. My modules are working now. Cheers from Germany. (+5,13 USD - enjoy your coffee)
Thank you for explaining the AT commands. I am just getting started and did not realize that. You make excellent videos that help so many, you are kind to share your knowledge.
uick uestion. in this video you set up a sender and receiver. If I want to do both way communciation how can I resolve the 3,3V dillema. Is it at all possible to set it up with Arduino Nano or Uno. Or should I switch to Arduino Pro mini that works on 3,3V logic.
I'm just wondering the transmitter and the receiver are the same module? And also what is the largest distance can be between the transmitter and the receiver
When I set my Frequency Band, I receive the +OK, am able to confirm the change, however after removing power and powering back on, the band reverts back to the previous band. Any ideas? I was able to set 2 modules last week and am unable to change them now.
Thanks very much my dear for this nice video. Please, assuming I am having 4 receivers, how can I add a keypad on the transmitter side so that I will use the keypad to write the destination address of the receiver that I will like to communicate. The lcd or OLED display in transmitter side will be used to display the receivers destination address when I am typing them. Thanks very much for your understanding and concern. Please, I am waiting for your reply
Sir Ji Namaskar and Happy Diwali Sir ji mujhey iot with home automation training lene hai kya aap training class dete hai kya sir ji pls confirm and aap bahut aachey se sikatey ho thanks u r all videos great
Great video! Very interesting and informative. What would I change in the code in order to get the LED to turn on while pressing the button only and turn off when not pressing the button? Again, thank you for the great videos.
Hi, very nice set up. I have a question though, how you make sure other devices don't trigger that same led? I ask this because there is no address set for the devices on you code to filter out other external devices messages.
Thank you for the video. Can this Tx circuit connect to a Lora gateway as a way to control and watch sensor data in a IoT platform? How long would the battery last with this LED cricuits Rx and Tx?
Hi. Thanks for this video. Is it possible to control with one transmitter few receivers? Led1 will turn on led on 1st receiver, led2 will turn on led on 2nd receiver and e.t.c.
thank u so much for detailed tut, would u make some more videos using this LoRa module like water level and automatic pump on off using this module and other projects?
i wanted to use this lora module to transmiting wiegand reader data but i wasn't aware that this module has a big dealy. Can you recommend any good solution wchich i can use to solve my problem . ?
Bhaut achha sirji , sirji ispe momentry operation kaise hoga batye please. I want to maximum 8 channel out put relay in reciver circuit. And 8 pushbutton for remote control . Relay operation momentry hona chaye plese. Push button pressed to relay out Pushbutton release to relay stop. Please please help sirji.
This video is very useful, Detail explanation. This reyax module is expensive and non availability in India, Hence do you any other lora module where we can set 865MHZ and configure it. Let it be AT command or UART communication.
The module is expensive in Amazon.in. If you get it from a supplier, it will be cheaper. Check out CPark Solutions in Bangalore. I buy from them for < Rs. 2000 regularly.
I have mentioned all the link in the Description. Download the Arduino Code and Datasheet of the Lora Module from easyelectronicsproject.com/arduino/lora-arduino-control-relay/
Reyax uses 800mhz frequency and is no more available in the market . The advantage of this module is it can be programmed with at commands. However 433 mhz according to me gives better range hence can we replace eeayx with l Ra02 module
Sir mujhe water level ka project chaye wireless lora module use Karke anti corrosion type level magnetic float switch. Plz help mere pass lora ryl896 module hai
⚠ This video took a long time to make if you would like to buy me a coffee to say thanks, link below: ☕
PayPal: paypal.me/sdaspay
Patreon: www.patreon.com/techstudycell
Thanks for sharing. The LORA library for Arduino failed for me, but you proved that it was not even needed. My modules are working now. Cheers from Germany. (+5,13 USD - enjoy your coffee)
Thank you for explaining the AT commands. I am just getting started and did not realize that. You make excellent videos that help so many, you are kind to share your knowledge.
Thanks for your feedback
Loved this tutorial and subed; I hope to learn more,
As usual I didn't forget to smashthe like button before leaving.
Greetings from Tanzania 🇹🇿
I have a question is there possible to transmit a signal to reciever the components of transmitter including fire alarm with sprinkler
uick uestion. in this video you set up a sender and receiver. If I want to do both way communciation how can I resolve the 3,3V dillema. Is it at all possible to set it up with Arduino Nano or Uno. Or should I switch to Arduino Pro mini that works on 3,3V logic.
Can we broadcast message from one lora node to all other lora nodes without gateway?
Great Video indeed. But what to do if we want to switch it faster? There is a delay between transmitter input and receiver output. Thank you
I give 10 out of 10. Thanks for great video
You are welcome
You did not connect RST pin. Should it be connected and if so to which microcontroller pin
I'm just wondering the transmitter and the receiver are the same module?
And also what is the largest distance can be between the transmitter and the receiver
Many thanks for your expansion. Using Bluetooth The code is written in Arduino uno What to do if want to switch to LORA now .
When I set my Frequency Band, I receive the +OK, am able to confirm the change, however after removing power and powering back on, the band reverts back to the previous band. Any ideas? I was able to set 2 modules last week and am unable to change them now.
Great project! This video, have legends? Tnks!
Awesome video, thank you 🙏
Can use an remote relay control to pair with the receiver?
Thanks very much my dear for this nice video. Please, assuming I am having 4 receivers, how can I add a keypad on the transmitter side so that I will use the keypad to write the destination address of the receiver that I will like to communicate. The lcd or OLED display in transmitter side will be used to display the receivers destination address when I am typing them. Thanks very much for your understanding and concern. Please, I am waiting for your reply
Wow~ What a helpful video~! Thank u.
Sir Ji Namaskar and Happy Diwali
Sir ji mujhey iot with home automation training lene hai kya aap training class dete hai kya sir ji pls confirm and aap bahut aachey se sikatey ho thanks u r all videos great
Appka pass ehi same lora moudle milegakiya ??
Indiawala purchase link kaha pe hai
App courier karsakta hai ?pleas app jogar karke dijye
thank your video is great but im thingking if it is possible to have multiple Transmitter with only one receiver. Do you have example for that
Can we use 2 or more lora transmitter with 1 lora transmitter?
What's the range of communication?
I'm from Brasil.
Your vídeo is Very good.
Congratulations
Thanks...
Sir dono ko power DC motor se de skte hai ?
Great job!
Great video! Very interesting and informative. What would I change in the code in order to get the LED to turn on while pressing the button only and turn off when not pressing the button? Again, thank you for the great videos.
Hi, very nice set up. I have a question though, how you make sure other devices don't trigger that same led? I ask this because there is no address set for the devices on you code to filter out other external devices messages.
Is it possible to send 2 lora transmitter data to the single receiver lora at the same time ?
How far it's range? Have u tested it's range without modification in antenna and hardware part ?
How to set Frequency 865 MHz ??
great project but i need momentary switch pls let me know for momentary program
Thank you for the video. Can this Tx circuit connect to a Lora gateway as a way to control and watch sensor data in a IoT platform? How long would the battery last with this LED cricuits Rx and Tx?
Is it possible to set multiple transmitter and one receiver using this setup? thank you..
I am trying same using uno bt i am getting lora sending failed neither At command is working
Hi. Thanks for this video. Is it possible to control with one transmitter few receivers? Led1 will turn on led on 1st receiver, led2 will turn on led on 2nd receiver and e.t.c.
Super ! Is this assembly bidirectional? Thank you
thank u so much for detailed tut, would u make some more videos using this LoRa module like water level and automatic pump on off using this module and other projects?
Cool project.💪
Thanks! 👍
i wanted to use this lora module to transmiting wiegand reader data but i wasn't aware that this module has a big dealy. Can you recommend any good solution wchich i can use to solve my problem . ?
Very good but can you use the onboard esp32 chip and do away with the Arduino?
Can we transmitt audio or voice?
Nice presentation. Thank you.
one lora rf module can connect to how many other lora rf module ?
Helpful video 👍
Thanks
After typing "AT" it send a result f +ERR=1
what you i do? thank you
Ir sensor with timer circuit plz
porque el tiempo de respuesta es tan lento en el minuto 6:31 se aprecia cuando pulsa el botón y tiene un retardo es un diseño en el código
i am keen to develope the same however i have a lora RA02 , kindly guide
can we use camera module with this, and can we send photos and video though it
I don't think so.
salve per avere il progetto completo ?
Projest was very nice
But Transmiter to recever response time is very low
How fix this problem?
What is the maximum communication distance between tx and rx
Is data transmission is secure
Can u give Proteus simulation for this project or help me out
Thanks for the video. can i used it in europe ?
Do you think that IT will work in a Subway.. IT IS under 30 underground
Bhaut achha sirji , sirji ispe momentry operation kaise hoga batye please.
I want to maximum 8 channel out put relay in reciver circuit.
And 8 pushbutton for remote control .
Relay operation momentry hona chaye plese.
Push button pressed to relay out
Pushbutton release to relay stop.
Please please help sirji.
is the signal affected by concrete walls?
Can you develope the same project using LoRa RA02 aithinker
Band rest automatically...😢😢any solution?
This video is very useful, Detail explanation. This reyax module is expensive and non availability in India, Hence do you any other lora module where we can set 865MHZ and configure it. Let it be AT command or UART communication.
The module is expensive in Amazon.in. If you get it from a supplier, it will be cheaper. Check out CPark Solutions in Bangalore. I buy from them for < Rs. 2000 regularly.
É possível usar outro modelo de modulo , mais acessível?
pl ease can you explain how to send pir sensor data from one lora module to another
Priyanka Rocks10aug You would include the information in the string sent with the AT SEND command. Build the string before the serial write operation.
I did exactly what you did, still mine is not working. Would you assist me?
How to make Radio control plane 6ch use lora
how much distance maximum will it work?
Bro how to turn off and on more than 6 bulb with thise
Please refer the following video
ua-cam.com/video/2aM5NPlFu3s/v-deo.html
@@TechStudyCell thanks for your reply but how can i write code to increase n number switches to control n number of output
wonderful project .. kindly share the link to purchase the lora module and download link of the code for Tx. and Rx a great work
I have mentioned all the link in the Description.
Download the Arduino Code and Datasheet of the Lora Module from
easyelectronicsproject.com/arduino/lora-arduino-control-relay/
Bro insted of push button can we use normal button. If it is possible please give me code 🙏 please
Hi Thanks for this video.Can you please send ne the link for the drivers to communicate throught serial port
I have used Arduino IDE
Can we use lora ra02
I will try making this project plz provides code and circuit diagram
what does it mean 6 in "serial.println" function?
Berkay Uysak Looking up the AT command reference from Reyax, the 6 refers to the address of the receiver as configured in the setup.
Thanks for sharing...
Thanks for watching!
শুভজিত দাদা প্লিজ একটু হেল্প করুন।
RYLR896 কত দাম?
Can we use 800MHz fr. bandwidth in india?
No. 865MHz.. Please google it.
I made this project , but it's range is just 300 m ! Why ?
Range depends where you are using it. If it is rural area then number of obstruction will be less and range will be higher
Sir Code is not downloading
দাদা আপনি কী পরবেন এই দুটো লড়া moudle জোগার করে দিতে
পরলে খুব ভাল হত।🙏🙏🙏🙏
Can we use LoRa module in RC transreceivers instead of NRF module?
I am also having the same doubt friend.
please send me a link from aliexpress that i can buy same 2 unit rylr896 as same as you have
Please refer the video description to get the purchase link.
noted
सर मुझे चार चैनल आन आफ स्विच की आवश्यकता है जिसमे सभी का अलग अलग स्विच चाहियेे क्या आप मेरी मदद कर सकते है जानकारी प्रदान करने का कष्ट करे
Reyax uses 800mhz frequency and is no more available in the market .
The advantage of this module is it can be programmed with at commands.
However 433 mhz according to me gives better range hence can we replace eeayx with l Ra02 module
433Mhz is not allowed in my country.
how can i contact you??
Nice 👍
Thank you
Welcome
Plz sir how to make this project help
If you face any issues, let me in comment section
@@TechStudyCell sir provides codes
Can i use this lora module in india? This module will work in india?
Yes.
Make an sensor data reading wirelessly
Did u actually accomplie 10 km??
The 10 km range is for the rural area. In town the range will be less.
is it illigeal to use
Depends on country. In India 865MHz band is allowed.
Your country band 865000000, and whree i can find my country band?
In my case, I have Google it.
👍
nice sharing....let me follow your chanel....
Sir plz provides code
Please visit our website and download the code. Link given in description
Llor inglis is beri güel
Hindi video banaiye
Planning to make separate Hindi channel
Sir mujhe ek project chye plz apka mob no do ?
You can ask here...
Sir mujhe water level ka project chaye wireless lora module use Karke anti corrosion type level magnetic float switch. Plz help mere pass lora ryl896 module hai
Does anyone looking job related to this video, please reply we are looking candidate for same
Yes I want