Can i update the software of the cluster. I put a new one on a Smax 2.5T 2006 wa6. But the cluster light and interior is not working. Know whats the problem? Thanks
Have a 2014 transit custom. Have the licensed 1yr copy of Forscan with Genuine module and cannot see the PAT’s feature within forscan tools menu for setting the keys. Do you know whether this feature is blocked on models of this year? Cheers
Can you do vin change with this I have a donor pcm that I want to put in my truck but I want the vins to match that way I can smog it what all would I need
Ciao fratello, ti chiedo un informazione riguardo alla mia problematica su quadro strumenti della mia ford focus 1.6 tdci 90cv mk2 2007, vorrei clonare e mettere il quadro strumenti nuovo .sai come fare?
my car isent reaching the ecu my mobilizer is flashing fast,after loads of turning the key on and off car starts these are the dtc codes -- E510 D900 then that means that there is a communications fault for the ignition, as well as a communication fault with the transmission. Usually this means that Your car will not start. could it be a bad earth connection
What would happen if you set it to 999999 drive till it goes to say 000001. In theory this would then allow you too input the numbers you want as they will all be higher mileage.
Hi mate can you help me with a problem I have? 2008 ford Cmax, I cannot get the fuel level gauge to work I have replaced the sender unit which has not helped a gauge sweep test shows the gauge to be working and I am getting a fault codeOn the instrument panel of 9202 any help would be appreciated
@@rmautodiag Thank you very much forgetting back to me really appreciate it I’m pulling my hair out here and the sender unit wasn’t cheap! any idea where I can find the colour coding for the wiring and does it go into any multi plugs anywhere?
@@SalimKhan-gk1fh looking a few diagrams they all look the same. A white/red and brown/red wire are for the sender to the cluster. The will be smaller than the pump wiring.
@@rmautodiag Oh cheers thank you very much for looking it up for me ,it’s a 1.8 TDCI and there is no pump in the tank just the sender unit, I take it the wiring loom will run down the driver-side inner sill carpet area?
I replaced the cluster on a 2012 fusion, i matched the numbers on the back of the new used cluster with the original cluster as told. Now the vehicle will not start,theft light blinks rapidly. if i put the old cluster back on start it up leave it on and unplug the original cluster while its running then plug the new cluster the vehicle keeps running, if i cut off the vehicle while the new cluster is plugged it will not cut back on, goes back to rapid theft light. I need help. Any suggestions??
I have the seem problem. I have an a extra one from the junk yard. My old speedo won’t need the transponder key. Any idea how can I take away the ante theft of this speedo
Hey Richard - love your work. Can I just ask: I currently use the Android app version of Forscan with my Focus MK3, but this is wireless through a Bluetooth vGate module. What corded module should I buy to get the full benefits using the PC version? I want to be able to program a new key amongst other things. Thanks in advance. Andy
I have a 2015 ford Pi sedan, I changed the instrument cluster for a sho instrument cluster and when I try to change the mileage using Forscan, I keep getting the service procedure has been interrupted error. Does anyone know how to get around this? I have tried almost all I know to do and I am stuck.
Hello, I have a 2008 Ford E250. I need to replace the instrument cluster. Can I use forescan to transfer configuration, etc to a new used unit?
Wish something like this existed for GM.
Great piece of software 👍
Thanks for the comment. It's a really good program, well worth the money👍
So I change my faulty gauge cluster 2011 ford fiesta. Will this be able to program the new cluster i have?
Can this forscan remove fault codes on the cluster panel.
Yes forscan can clear codes on all modules
Can i update the software of the cluster. I put a new one on a Smax 2.5T 2006 wa6. But the cluster light and interior is not working. Know whats the problem?
Thanks
Do you need a specific dlc connector for this
Have a 2014 transit custom. Have the licensed 1yr copy of Forscan with Genuine module and cannot see the PAT’s feature within forscan tools menu for setting the keys. Do you know whether this feature is blocked on models of this year? Cheers
Can you do vin change with this I have a donor pcm that I want to put in my truck but I want the vins to match that way I can smog it what all would I need
it is possible to change the vin number
how can i clone my old clocks so i can install new clocks so it has my keys coded to it?
Ciao fratello, ti chiedo un informazione riguardo alla mia problematica su quadro strumenti della mia ford focus 1.6 tdci 90cv mk2 2007, vorrei clonare e mettere il quadro strumenti nuovo .sai come fare?
On my Ford Fiesta, I don't see the instrument cluster option. Is there something I'm missing?
i have one key stored in forscan,how do i delete that,will i need two keys,perhaps thats why when i push the clutch pedal to floor the car wont start
my car isent reaching the ecu my mobilizer is flashing fast,after loads of turning the key on and off car starts these are the dtc codes -- E510 D900 then that means that there is a communications fault for the ignition, as well as a communication fault with the transmission. Usually this means that Your car will not start.
could it be a bad earth connection
hi there
using forscan for first time i must of deleted ignition key as when i put my clutch pedal down the car wont start
can you help me at all
What would happen if you set it to 999999 drive till it goes to say 000001. In theory this would then allow you too input the numbers you want as they will all be higher mileage.
Its good question
@Hava Dilara Videos someone posted it doesn't go past 999999 just stays there unless you have an expensive mileage correction tool.
Hi i am change a cluster of ford escape 2011 but now dont start ???? I nees to programing
Hi mate can you help me with a problem I have? 2008 ford Cmax, I cannot get the fuel level gauge to work I have replaced the sender unit which has not helped a gauge sweep test shows the gauge to be working and I am getting a fault codeOn the instrument panel of 9202 any help would be appreciated
I would check continuity of the wiring between the sender and the cluster.
@@rmautodiag Thank you very much forgetting back to me really appreciate it I’m pulling my hair out here and the sender unit wasn’t cheap! any idea where I can find the colour coding for the wiring and does it go into any multi plugs anywhere?
@@SalimKhan-gk1fh looking a few diagrams they all look the same. A white/red and brown/red wire are for the sender to the cluster. The will be smaller than the pump wiring.
@@rmautodiag Oh cheers thank you very much for looking it up for me ,it’s a 1.8 TDCI and there is no pump in the tank just the
sender unit, I take it the wiring loom will run down the driver-side inner sill carpet area?
@@SalimKhan-gk1fh it still shows the same wiring colours and a connector on R/H A pillar then to the cluster pins 7 and 8.
Can I program one from the junkyard
How I gan get that option on my Forscan? I have 2.2.6 Beta. What version did you use?
Milage correction not available on FiestaMk6 or Fusion.
Excellent
Thanks for the comment
I replaced the cluster on a 2012 fusion, i matched the numbers on the back of the new used cluster with the original cluster as told. Now the vehicle will not start,theft light blinks rapidly. if i put the old cluster back on start it up leave it on and unplug the original cluster while its running then plug the new cluster the vehicle keeps running, if i cut off the vehicle while the new cluster is plugged it will not cut back on, goes back to rapid theft light. I need help. Any suggestions??
I would imagine it need the PATS setting up as the keys will not be programmed to your new dash.
I have the seem problem. I have an a extra one from the junk yard. My old speedo won’t need the transponder key. Any idea how can I take away the ante theft of this speedo
.
Hi, I know this happened two years ago. I am wondering if you fixed this problem and how you did it.
does anyone make software like this for GM vehicles? i bought a new cluster and want to write the original miles , and turn some features on
Hey Richard - love your work. Can I just ask: I currently use the Android app version of Forscan with my Focus MK3, but this is wireless through a Bluetooth vGate module. What corded module should I buy to get the full benefits using the PC version? I want to be able to program a new key amongst other things. Thanks in advance. Andy
Can this guy program anything with forscan? Both vids ive watched he has failed to program anything
Hei, dude with FORScan can programming cruse control on mk6.5 (2012) Ford Fiesta ?
I have a 2015 ford Pi sedan, I changed the instrument cluster for a sho instrument cluster and when I try to change the mileage using Forscan, I keep getting the service procedure has been interrupted error. Does anyone know how to get around this? I have tried almost all I know to do and I am stuck.
write it to 999999 and drive 2 km to 000001 then increase ?
Thats the one !
wouldn't it stop at 999999 and never turn over?
U know u can change the milage to 9999999 drive it for a mile then it will be 0000000 then u can make any milage u want
Good to know👍 thanks for the comment
No problem ive been experimenting for the past few months .. My car is 15 yrs old has 101 miles now 😂
@@jeffforbes8743 yep it seems a really good tool for the price
I've seen people say it doesn't work that way
@@AKingOfTheStoneAge it does
👍
Thanks for the comment
Hi my friend
When I run this on my 2004 f150 it only shows outside temp. I need to change my mileage after I installed a new cluster. Ideas?