Here is breakdown of how to install E-Fans on any 4.8, 5.3, 6.0 trucks/SUV. Link to the E-Fans: www.ebay.com/i... Link to the E-Fan Harness: www.ebay.com/i...
Good video bro! Just what I needed. I have efans already it’s just whoever did it before me did a shitty job and made it run off the fuse burner which is bad. This helped me. Getting mines done now
Good job bro you got it done quick just a Lil tip efans on are trucks are problematic so what I do I run a toggle switch inside for high fans so if all fails I'll hit the switch anyway good to see the upgraded efans
Did you have to tune the computer at all? I don't mind toggle switches at all if I can do these on toggle switches and save some money that's fine by me
@@gavinsixnine yes my tuner did it before the install so thats why mine worked from the jump, but if you don’t want to do that toggle switches definitely work as well 👌
Did you tune it yourself or have tuner? Is any tuner able to do it Im ready for the install just don’t know anything abt running or how to make it turn on with the heat
My AC actually never worked I have to fix it lol but it should be fine haven’t heard of this affecting the ac but yes pin 33 was replaced just push it to the side not needed!
Im seeing the comments and you said that you already had the truck tuned prior to installing the efans. Will tuning it before actually installing them affect your driving?
No it will not affect the driving, my tuner just tuned the parameters in prior to me installing them so they turn on with temperature once the thermostat opens up and they kick on it’s all it is.
Damn bro that sucks, yeah could be I think I heard of some doing that. The fans put out a lot of load so the wire gauge it comes with might not be up to the task.I got mine from eBay I think and it’s still doing fine with no issues so far.
Hey bro. Doing this upgrade on my 03 yukon but the issue is my yukon passes smog simce im in California once i get tunes just for fans only would i still be able to pass my emissions test or no im tuning just for fans please let me know
Yeah bro I’m pretty sure you’ll be fine, all the tune is doing is adding the feature of kicking your fans on like if it was factory, like the models that came with it. Its not emissions related, but you can also do it other ways without a tune like just running your own switch and turning them on yourself, or you can get a wiring kit that comes with a temperature switch and install it in your radiator and it will kick them on with temperature and no tune needed. The tune is nice because it’s like OEM.
Sorry I think I read it wrong, yeah the difference in the 34 radiators is the coolers one with just a trans cooler and another with a trans and engine cooler I think either one works.
@@nolimitroy1983when i was first upgrading my radiator for efan swap i noticed that there where 2 options. One that had a trans cooler and a engine oil cooler and the other option just had the trans cooler. One way to tell if you need the one with the engine oil cooler is to check if you have a cooler line from your oil pan to the radiator. You can check to see if you have a cooler line on the driver side of your oil pan
The function for kicking on the fans needs to be flashed into the computer to have them function like oem. But you can still do it without going this route and doing other options.
doing this mod Saturday! for the pin 33 I got the same relays as you did, so should I remove the green pin that's already in the ecu and replace it with the one it came with? what does the old pin33 even do?
The green pin that goes to pin 33, if I remember correctly was for AC hvac door control or AC clutch. But yes I just removed it and put my fan plug in. I most likely won’t use AC anyway. I’m Not sure if you can tap into it to retain them both. I’ve heard other things for a work around but can’t remember off the top of my head.
Looks way better🔥
sounds wayyy better too! 👌
you should get a "BP automotive" efan harness really good quality i got the same harness you got and it melted like a month later 💯
Appreciate the info bro! I’ll be on the lookout for that! 👌
Damn homie
Replace that belt!
Truck coming long ways, keep it 👌🏻
Damn you heard belt!? 😂 Appreciate you tho my boy!
Good video bro! Just what I needed. I have efans already it’s just whoever did it before me did a shitty job and made it run off the fuse burner which is bad. This helped me. Getting mines done now
Glad this video helped you out bro! Not to many good videos out there! 💪
Love the truck bro keep it up 👍
Hell yeah man got lots more coming! 🔥
Good job bro you got it done quick just a Lil tip efans on are trucks are problematic so what I do I run a toggle switch inside for high fans so if all fails I'll hit the switch anyway good to see the upgraded efans
Thanks for the tip brotha, i will keep an eye on that! 👌
Did you have to tune the computer at all? I don't mind toggle switches at all if I can do these on toggle switches and save some money that's fine by me
@@gavinsixnine yes my tuner did it before the install so thats why mine worked from the jump, but if you don’t want to do that toggle switches definitely work as well 👌
When would you turn the switch on if i had them?? Just a stupid question wanna make sure...@ErikRose_
more drive pov’s 😍😍
Definitely want to! working on getting new equipment for better audio of the truck! 🔥💪
Did you tune it yourself or have tuner? Is any tuner able to do it Im ready for the install just don’t know anything abt running or how to make it turn on with the heat
I took it to a tuner, any tuner that does LS engines should be able to do it for you bro!
The link to the e fan harness doesn’t work anymore, any way to update the link??
Hey bro, what’s the name of the tuner you went to? I think it’s off the 60 freeway right? By the way, nice truck is coming along.
yessir! kp fab and tune in Riverside, CA thanks for the support my boy! 💪
@@ErikRose_ Thanks bro!
My green/red connector already has a wire in the #33 door as well. Does everything work like it should on yours still?
yup works fine as it should!
Can you run this harness without the tune?
you can if you just add a switch to power it on and off instead
Clicked on the links but the link for the harness doesn’t work doesn’t pop up would be nice to get the same one you used
yeah looks like he changed the link but tbh bro theyre all pretty the same from ebay
can you share the link of all the parts for the cam 💯
gotchu bro it actually came as a kit!
Texas Speed Stage 2 High Lift... www.amazon.com/dp/B07N7RXKCH?ref=ppx_pop_mob_ap_share
Aye bro your ac working as intended? And you replaced the pin 33 right? You didn’t just tap into it?
My AC actually never worked I have to fix it lol but it should be fine haven’t heard of this affecting the ac but yes pin 33 was replaced just push it to the side not needed!
The only difference i felt was in my wallet!!!!!😂😂
But ....a/c does runs way cooler...!!!
😂😂😂
👍👍from this guy
yessir appreciate it 🫡
Nice truck
Thanks 👍
Im seeing the comments and you said that you already had the truck tuned prior to installing the efans. Will tuning it before actually installing them affect your driving?
No it will not affect the driving, my tuner just tuned the parameters in prior to me installing them so they turn on with temperature once the thermostat opens up and they kick on it’s all it is.
My harness didnt last me it melted was it because i got it from amazon for 25 bucks ?
It also made one my e fans stop spinning
Damn bro that sucks, yeah could be I think I heard of some doing that. The fans put out a lot of load so the wire gauge it comes with might not be up to the task.I got mine from eBay I think and it’s still doing fine with no issues so far.
Headers and Y pipe next ??
bros read my mind! 👌
Good Lookout Bro!
Hows the ebay/amazon harness treating you?
It’s been treating me well, no issues so far.
So what temp are you at?
Basically original temps !
Could I do this on my 02 ?
yes you can mine is actually a 2000 bro cateye swap!
Did u tune it in to make work or they work automatically?
Missing an intake bro
What’s full vid dumbass
thats a 5 min fix i’ll do it eventually lol 👌
was there no tuning needed??
or did you tune it in already
yes mine was already tuned!
How’d the bottom of the electric fan bolt on? Or was it just zip tied
No, it has 2 tabs that’s slide into the radiator at the bottom and that what holds it in. And bolts up at the top.
@@ErikRose_ bet bet looking into buying a set of e fans your video was well made but just curious about that little detail. Thank you sir
Gotcha, yeah you got it bro no worries. Appreciate you watching..
Does this work on a 00-03 bubble eye aswell ?
Yeah it does bro, mine is originally a 00 bubble eye I just did a cat eye swap on it.
i have a 6.0 escalade fit?
yup should be the same thing with the 6.0 👌
Your ground wire is too thin. Each fan is ~80W, which is ~7 amps. That's 14 amps. Too much for 12 gauge. Need 10 gauge.
Hey bro. Doing this upgrade on my 03 yukon but the issue is my yukon passes smog simce im in California once i get tunes just for fans only would i still be able to pass my emissions test or no im tuning just for fans please let me know
Yeah bro I’m pretty sure you’ll be fine, all the tune is doing is adding the feature of kicking your fans on like if it was factory, like the models that came with it. Its not emissions related, but you can also do it other ways without a tune like just running your own switch and turning them on yourself, or you can get a wiring kit that comes with a temperature switch and install it in your radiator and it will kick them on with temperature and no tune needed. The tune is nice because it’s like OEM.
@@ErikRose_ yeah I’m gonna do it the oem way hopefully when I do my smog it passes no issue thanks for the help
You got it bro, yeah I’m pretty sure it won’t be an issue. The tuner will definitely know for sure if it’ll be an issue, but I doubt it.
@@ErikRose_ for sure bro thanks
@@RICKY-LSXhey man really interested if u found out if it will pass smog with the tune. I got an 02 Escalade so I’m in a similar situation as u
When you gonna dyno the truck
I took the truck to the dyno when i first cammed it just to dial it in, i will dyno it again once i boost it!
There’s different types of 34” radiators bro which one is the right one ?
34 is the correct one for E-fans…
Sorry I think I read it wrong, yeah the difference in the 34 radiators is the coolers one with just a trans cooler and another with a trans and engine cooler I think either one works.
@@ErikRose_ so either or would work ? Would the one without the cooler work as well or no ?
@@nolimitroy1983when i was first upgrading my radiator for efan swap i noticed that there where 2 options. One that had a trans cooler and a engine oil cooler and the other option just had the trans cooler. One way to tell if you need the one with the engine oil cooler is to check if you have a cooler line from your oil pan to the radiator. You can check to see if you have a cooler line on the driver side of your oil pan
@@Alex68dash what size radiator? Got my efans and they measured 34” not sure if the 34” radiator comes slightly longer to reach the mounting holes.
NO TUNE NEEDED????
The function for kicking on the fans needs to be flashed into the computer to have them function like oem. But you can still do it without going this route and doing other options.
Will this work on a 2004 5.3 cat eye ??
Yeah same thing just got to have your fans tuned in if you want them to automatically switch on.
Thank sir I appreciate the get back, keep up the good videos
doing this mod Saturday! for the pin 33 I got the same relays as you did, so should I remove the green pin that's already in the ecu and replace it with the one it came with? what does the old pin33 even do?
The green pin that goes to pin 33, if I remember correctly was for AC hvac door control or AC clutch. But yes I just removed it and put my fan plug in. I most likely won’t use AC anyway. I’m Not sure if you can tap into it to retain them both. I’ve heard other things for a work around but can’t remember off the top of my head.
if i get the ecm bench flashed do i have to do the key relearn process ?
No I don’t think so, I didn’t have to do any of that just put it in and went.