2000$ for a full seat cover on a crew cab 1500 from 07-13 smh that’s way to much . Why can’t a company make some nice seat covers at a affordable price.
ua-cam.com/video/ChFtRgkj7E8/v-deo.htmlsi=wsjuwfuUca2VVXO_ this guy used $100 covers from eBay and got great results. I ordered a set as well and they look and feel great (have yet to install).
Finally a great install on these seat covers! Been hesitant to do my driver seat until now! Gonna redo my foam and bottom cover this spring and perhaps replace the heating unit as well.
I used the eBay covers and they are not as good as these covers but fit well. Front 2 seats cost me less than $225 with drivers seat base foam. The foam was almost $100. The looks are the same. Like he said the seat foam is insanely comfortable.
The driver seat bottom on my old 2006 2500HD Silverado work truck needed new duct tape, but I decided to spring for a $35 seat cover from Walmart. To do only the bottom cushion, there is no need to remove the entire seat from the truck, but a flashlight is handy. Gloves helped with my grip and protected me from the sharp frame edges. The two front nuts are easy to reach and remove with a 13mm socket. Tilt the cushion up slightly and slide the rear pegs out of their slots. Tip the cushion up out of the way and disconnect the wiring. (Mine had no power seat controls.) It is not necessary to unsnap the wiring around the frame, but the electrical plugs are infuriating. The old seat cover did not want to come off. A sharp knife cut open the cover along the bottom edge on one side and made the rest easy peasy. Trying to do the hook and loop with the new cover first got me off to a bad start. Stretching the pleather over the cushion and hooking it to the frame seemed impossible from any side and it was crooked. Removing the cover and starting over completely, I decided to hook the rear part while it was loose. The hook and loop could take care of itself. Then I stretched the cover over the cushion on all sides. Still unable to stretch it far enough to hook the sides and front properly. But guess what. The factory did not have the front hooked either, on the driver seat or the passenger seat. Who knew. Later this summer after it warms up and I've... broken it in, I may try stretching it again. But in the meantime it looks good and works great.
it would be dang nice to know a head of time to know how much to save up for the rear end bottom db foam's & the top & bottom seat covers for our 00-06 chevy's or our gmc's........ i looked all over & can't find prices on these here like u did in your truck there ............................
I'm curious how you got a passenger side lower foam. I've been wanting to do both lower seat foams, upper and lower skins, and heaters but I haven't been able to find a passenger side lower foam. I didn't see the passenger lower foam listed on their website. Did you call them to get one? Is this a new product for them?
R U KIDDING ME.... JUST FOR 1 SIDE / EACH FRONT SEAT ONLY.... FOR THE REAR BOTTOM'S OF THE NEW DB FOAM & THE 2 PIECE SEAT COVER ONLY FOR 1 SIDE OF $ 686 bucks,,..... w/o shipping or anything.......... holy crap...... no way i can afford that price...............................
probably the best detailed video, step by step, comprehensive, talk through, inductional demo video for tbis job! outstanding work guys🎉
I wish this video would have showed up in my search last week. Everyone needs to like and subscribe.
Awesome vid. My 05 Duramax needs this bad. Thanks for taking the time to show us!
Trick with the headrest and bag was cool
The CLASSIC GM captains chairs are arguably the best seats in vehicles period!
I replaced my dads 2007.5 Chevy truck cloth driver seat base with seat shop covers and foam and I agree with you very great quality
To be a able to bring these back to new condition is amazing.
2000$ for a full seat cover on a crew cab 1500 from 07-13 smh that’s way to much . Why can’t a company make some nice seat covers at a affordable price.
ua-cam.com/video/ChFtRgkj7E8/v-deo.htmlsi=wsjuwfuUca2VVXO_ this guy used $100 covers from eBay and got great results. I ordered a set as well and they look and feel great (have yet to install).
Finally a great install on these seat covers! Been hesitant to do my driver seat until now! Gonna redo my foam and bottom cover this spring and perhaps replace the heating unit as well.
Thanks man! Good luck on your setup
I used the eBay covers and they are not as good as these covers but fit well. Front 2 seats cost me less than $225 with drivers seat base foam. The foam was almost $100. The looks are the same. Like he said the seat foam is insanely comfortable.
Nice ! I need this for my 2005 Hummer H2, very similar seat assembly!
Awesome video man.
The driver seat bottom on my old 2006 2500HD Silverado work truck
needed new duct tape, but I decided to spring for a $35 seat cover from Walmart.
To do only the bottom cushion, there is no need
to remove the entire seat from the truck, but a flashlight is handy.
Gloves helped with my grip
and protected me from the sharp frame edges.
The two front nuts are easy to reach and remove with a 13mm socket.
Tilt the cushion up slightly and slide the rear pegs out of their slots.
Tip the cushion up out of the way and disconnect the wiring.
(Mine had no power seat controls.)
It is not necessary to unsnap the wiring around the frame,
but the electrical plugs are infuriating.
The old seat cover did not want to come off.
A sharp knife cut open the cover along
the bottom edge on one side
and made the rest easy peasy.
Trying to do the hook and loop with the new cover first
got me off to a bad start.
Stretching the pleather over the cushion and hooking it to the frame
seemed impossible from any side and it was crooked.
Removing the cover and starting over completely,
I decided to hook the rear part while it was loose.
The hook and loop could take care of itself.
Then I stretched the cover over the cushion on all sides.
Still unable to stretch it far enough to hook the sides and front properly.
But guess what. The factory did not have the front hooked either,
on the driver seat or the passenger seat. Who knew.
Later this summer after it warms up and I've...
broken it in, I may try stretching it again.
But in the meantime it looks good and works great.
Thank you for such a great video.
Very nice video informative and good demonstration
I need a cloth driver side bottom cover. And an arm rest cover.
How come there are no foam replacements for the back rest?
My '99 Sierra SLT Z85 needs these bad. I remember driving it off the showroom floor at the dealer in Nashville.
Well done! Thank you!
What you guys should do is make a package deal for a cheaper price Make a few of them actually because those prices are crazy man
Front part of the seat bottom will never be right again other than that they’re great
it would be dang nice to know a head of time to know how much to save up for the rear end bottom db foam's & the top & bottom seat covers for our 00-06 chevy's or our gmc's........ i looked all over & can't find prices on these here like u did in your truck there ............................
Is there a video on the rear seat
Everything’s easy. Everything. Except the armrest. I’m fighting to install the pin back onto the backing of the seat. LOL.
This guy is a professional, you have a new subscriber...see you next session💯🤜🏿
Good info great content as usual
Is there an update on these Kyle? I just picked up a 2004 and the driver seat is in need of this upgrade.
Im thinking of buying this brand for my Suburban, How much of the seat is actually leather?
Great video, what happened to Capt. Ron and McBake??
Can you please do a long term review how they held up.
I can do that and they’re holding up great so far 👍🏻
Is the passanger and driver side seat bottom the same
no
How about a back seat removal?
How much was the foam?
That’s to much money 💰 that’s crazy
I'm curious how you got a passenger side lower foam. I've been wanting to do both lower seat foams, upper and lower skins, and heaters but I haven't been able to find a passenger side lower foam. I didn't see the passenger lower foam listed on their website. Did you call them to get one? Is this a new product for them?
It was a misspeak on my part. It is a second drivers foam for when I do my rear seat.
I guess the promo code is not active
Sorry I can’t say weather they’ve kept it active. I’ll bet if you email them and ask about it they will likely honor it.
I was interested till I priced it out. $686 for one side! Lol without shipping. Rather have a lift pump, great video though.
R U KIDDING ME.... JUST FOR 1 SIDE / EACH FRONT SEAT ONLY.... FOR THE REAR BOTTOM'S OF THE NEW DB FOAM & THE 2 PIECE SEAT COVER ONLY FOR 1 SIDE OF $ 686 bucks,,..... w/o shipping or anything.......... holy crap...... no way i can afford that price...............................
I need front and rear so that’s.............🤣🤣🤣🤣🤣🤣🤣. I ❤️ duct tape.
Ebay :)
These things are PRICY. Better to just find a used seat IMO
Hi how much its covers for chevy silverado 2001