What a great tech video. This really connects the dots for me. I'm working on a 30RPS build for my son that is CQB compatible capped at 350FPS w/ .20 BB. I already have many of the elements pulled together. Will incorporate short stroking to pull the FPS down from 400 to 350. He is going to love his M4 even more :)
Your own explanation shows why you should remove from the release side of the sector gear. Removing from the release side will let go of the piston earlier, therefore the piston will return earlier giving more time before the tappet cycle starts again.
I cant see how cutting the 1st teeth off works? The fire stroke has to be completed before the tappet plate opens. So delaying the pickup serves no purpose? the piston has to be finished before tappet opens. Were as, if you cut the last teeth off the sector gear, you give more time for the fire stroke to finish before the tappet opens, in trade off you get less time for the tappet to seal.
Thank you for your video, quick question. On my Scorpion Evo I have what you call a pre-engagement. I do not want to cut the gear teeth. If I change the delayer, it can help to reduce it? Thanks.
no. the delayer chip only effects the tappet plate, it essentially stop the tappet from loading the next bb for an extra fraction of a fraction of a second. this is because on a fast RPS gun the gun won't load the next bb as the nozzle doesn't stay back long enough.... pre engagement is completely different. Pre-engagement means the piston isn't getting all the way forward before the sector gear spins back around to grab the piston teeth, so instead of the piston being all the way forward allowing the sector gears first tooth to pick up the pistons first tooth as it should, instead the 1st tooth of the sector gear ends up grabbing the piston somewhere in the middle, the issue here is the sector and piston have the same amount of teeth so if the sector grabs the piston in the middle it will then keep pulling it back longer than the piston has teeth or room at the back of the gearbox to go, that ends up in either the pistons teeth breaking off or the sector gear breaking apart or most likely the plastic piston shattering... bad news.
the holy grail of blaster tech videos! thanks for your countless hours under the gearbox to provide us this info 👍
What a great tech video. This really connects the dots for me. I'm working on a 30RPS build for my son that is CQB compatible capped at 350FPS w/ .20 BB. I already have many of the elements pulled together. Will incorporate short stroking to pull the FPS down from 400 to 350. He is going to love his M4 even more :)
I’m new to Airsoft, but delighted to learn that it is filled with terms like:
“Breaking the Seal”
“Pre-mature Ejacul..Engagement”
“Short stroking”
Your own explanation shows why you should remove from the release side of the sector gear. Removing from the release side will let go of the piston earlier, therefore the piston will return earlier giving more time before the tappet cycle starts again.
Dude your channel is so underrated, great work. Edit: 2S batteries are labeled as 7.4v but they are actually 8.4v u can check this with a multimeter.
same for 11.1 they are like 12.6
12v car battery charges at 14.2v, resting voltage is 12.8v. Yadda yadda yadda
I cant see how cutting the 1st teeth off works? The fire stroke has to be completed before the tappet plate opens. So delaying the pickup serves no purpose? the piston has to be finished before tappet opens. Were as, if you cut the last teeth off the sector gear, you give more time for the fire stroke to finish before the tappet opens, in trade off you get less time for the tappet to seal.
I agree, surely taking the pickup teeth off will affect tappet timing.
Helped alot thanks rowan
4:16 premature ejacu ... engagement 😂
It was a good save on his part.
17:35
His super smart detailed sector gear cheat sheet beginning
😉
Loving this video, and I’m yet at min 10!
Why do i have with 11.1V Lipo, 18:1 gearset and 18k motor (standard G&G) 33rps? in theorie i would need a motor with about 37k @11.1V
Good shit keep it up!
Top stuff. New sub 👍👌👏
I Like it
Thank you for your video, quick question. On my Scorpion Evo I have what you call a pre-engagement. I do not want to cut the gear teeth. If I change the delayer, it can help to reduce it? Thanks.
no. the delayer chip only effects the tappet plate, it essentially stop the tappet from loading the next bb for an extra fraction of a fraction of a second. this is because on a fast RPS gun the gun won't load the next bb as the nozzle doesn't stay back long enough.... pre engagement is completely different. Pre-engagement means the piston isn't getting all the way forward before the sector gear spins back around to grab the piston teeth, so instead of the piston being all the way forward allowing the sector gears first tooth to pick up the pistons first tooth as it should, instead the 1st tooth of the sector gear ends up grabbing the piston somewhere in the middle, the issue here is the sector and piston have the same amount of teeth so if the sector grabs the piston in the middle it will then keep pulling it back longer than the piston has teeth or room at the back of the gearbox to go, that ends up in either the pistons teeth breaking off or the sector gear breaking apart or most likely the plastic piston shattering... bad news.
i subscibe you bro! thats good information 😄
anyway do you mind share shim guide for v2 gearbox?
Fxxking good education video
I’m have the issue running over 25 rps then FPS drop from 420 to 360 FPS always
This dude wants to say premature ejaculation sooo bad lmao, great info still XD
I swear you were going to say premature ejaculation, but kept correcting yourself. Nice video though, very informative.