My concern was im to late to start up with a gen 8 mid 2019. I feel as the limitations of stock pile of mods are slim to none. I was tossing up to just get you to build me a reliable gen 8 gearbox or giving it a try just to get started. After watching this video im still keen to rip it apart and get gel balls deep as you say it haha. I look forward to your gen 8 gear box flashback in time, does and donts, what fits and what doesnt. Your attention to detail is impeccably and i enjoyed this vid very much. I am in north qld so my connection to people directly (gel blaster related) is very limited. Keep up that good spirit and dont give out those minor secrets that took you a long time, money and hair to figure out , just add them in the modding service, make them pay for it :)
So much good info on this vid, best online for factual info I've found, good work. Answered a problem I've been having personally to do with the tappet plate. Subbed 👍
I guess im asking the wrong place but does anybody know a method to log back into an Instagram account..? I stupidly lost my password. I would appreciate any tips you can give me
@Fernando Chase I really appreciate your reply. I got to the site thru google and im in the hacking process atm. Takes a while so I will get back to you later when my account password hopefully is recovered.
they call it “Wells” because you’re inevitably throwing your money into a hole 🕳 😒 i’ve learnt this the hard way with my honey badger/retro box combo. p.s great video very informative especially the tappet timing tips 👍
have you got a preference//alternative for a good nozzle and T piece on the LTD HK 416D ...i saw olot of peeps grabing red double O ring and all stock is gone...is there another option in your wise opinion?
Hey bro love your knowledge and helpful vids!! Any chance you’d know anything about fighting bro gears and singularity gearbox?? I have 16:1 fighting bro gears and when I put them into my gearbox the spur and sector gears don’t need any shims but when I do the screws up the gears are really tight???? I have already stripped the bevel gear (the small narrow end), only had them a day!! Please help??
the standard black ones have a mold seam flange right around the outside seal surface they are not designed for sealing in a tube like this. dont use them. This is realy great content thanks.
i definitely would like to know a bit more about which magazines work best in which blasters and why. after you telling me about the slower motor in the gen 9 mags, and the obvious fact my ACR mags are just shite, i'd really like to hear more on the subject.
My go to mag is the high speed gen8 mag. That mag is good for 65rps. You can tell if it's a high speed mag by testing the ohms reading between the mag terminals. This mag will work with the acr and it works really well. The wells mag us only good for 50rps. With that said I've had them fail alot sooner. The gen9 mag is bad. It's has a reduction get inside the mag to make it slow. We don't do slow lol. The j10 acr mag is just crap straight out of the box. It miss feeds and intermittently works at best. Hope this answers your questions. Check out our FB community page for more blaster talk and info.
@@rpmtechshop8006 cheers man. i dead set keep forgetting to whack my questions up on the rpm page, and it's probably the best place to find answers at the moment lol.
Hey mate, I’m considering doing a DSG build in my gen9 but I’m not too sure about the tappet plate because it uses a different one to the v2 gearboxes. From what i’ve heard here they need to be modified. Do you think it would work with the stock tappet plate? Thanks
hi, i am new to gel blaster :D this video has helped a lot on understanding what kinda of upgrade i should get in the near future (currently own a ACR j10, with 40cm barrel and 1.2 spring) i am curious in regard to the two piece cylinder / head design, to prevent possible air leak, is it a good idea to actually seal/glue the two part togerther with like silicon or even automotive gasket sealant or such? like, just to be sure there is no way in hell for it to leak O_O reason i am asking is because in non of the build/mod video i've seen, no one ever talks about actually sealing the two part together permanently, which to me seems like a good idea to prevent leak
Some absolute Gems of Info here! Well worth the watch - thanks for your time mate! But honestly What gets me the most is how a bunch of backyard Aussies have taken this toy ( of ok design + made from absolute shit ) to what we have now ? - what an achievement , which is because of people like ur self! 👍. ( The gov wouldn’t give us bb’s - so we said “ fuk u ! We’ll make it our own! “ )
Now I regret buying my Kriss Vector V2 😭...I should have gone with other blasters that are upgrade friendly. When I bought Kriss Vector V2 I thought its the coolest blaster with all the accessories but now realized it was a mistake buying it since it will have issues in the long run and will die anytime sooner or later 😭
Yes you are right. It's a bell curve. There will be a point where too much air will create a loss of fps. I should of said the more efficiently you use the air in the cylinder the easier it will be to create fps.
@@rpmtechshop8006 as you said @shaady you need to ensure you are working out volumetric pressure as Rowan does if starting to ensure your best barrel to cylinder ratio
alright... so any quests rt..? im gonna ask a little out if topic here. ermmm i've just accidentally shot my eyes. now blindfolded. so when can i see again? anyone with same experiences? pls share. another is..... i'm working on changing to aluminium pipe. why my fps dropped? anyth i did wrong? all others still stock. last i remembered looking into the pipe to search for any obstructions n i accidentaly shot myself
Only just come across your channel and got to give you 2 thumbs up, learnt a bit from 2 vids,
Now I got to strip and recheck everything on the acr.
My concern was im to late to start up with a gen 8 mid 2019. I feel as the limitations of stock pile of mods are slim to none. I was tossing up to just get you to build me a reliable gen 8 gearbox or giving it a try just to get started. After watching this video im still keen to rip it apart and get gel balls deep as you say it haha. I look forward to your gen 8 gear box flashback in time, does and donts, what fits and what doesnt. Your attention to detail is impeccably and i enjoyed this vid very much. I am in north qld so my connection to people directly (gel blaster related) is very limited. Keep up that good spirit and dont give out those minor secrets that took you a long time, money and hair to figure out , just add them in the modding service, make them pay for it :)
Thanks for the positive feedback! Your support.is greatly appreciated!
So much good info on this vid, best online for factual info I've found, good work. Answered a problem I've been having personally to do with the tappet plate. Subbed 👍
I guess im asking the wrong place but does anybody know a method to log back into an Instagram account..?
I stupidly lost my password. I would appreciate any tips you can give me
@Kingston Dangelo Instablaster ;)
@Fernando Chase I really appreciate your reply. I got to the site thru google and im in the hacking process atm.
Takes a while so I will get back to you later when my account password hopefully is recovered.
@Fernando Chase it worked and I now got access to my account again. Im so happy!
Thank you so much, you saved my account!
@Kingston Dangelo you are welcome :D
they call it “Wells” because you’re inevitably throwing your money into a hole 🕳 😒 i’ve learnt this the hard way with my honey badger/retro box combo. p.s great video very informative especially the tappet timing tips 👍
have you got a preference//alternative for a good nozzle and T piece on the LTD HK 416D ...i saw olot of peeps grabing red double O ring and all stock is gone...is there another option in your wise opinion?
is the cylinder and piston of gel blaster and airsoft similar? Can we fit airsoft gear parts in jinming gearbox v2
Where do you get those v2 style 6mm aeg nozzles from?
Hey bro love your knowledge and helpful vids!! Any chance you’d know anything about fighting bro gears and singularity gearbox?? I have 16:1 fighting bro gears and when I put them into my gearbox the spur and sector gears don’t need any shims but when I do the screws up the gears are really tight???? I have already stripped the bevel gear (the small narrow end), only had them a day!! Please help??
Hey brother. Look me up on RPM Blasters community page and pm me. We will sort your issues out.
the standard black ones have a mold seam flange right around the outside seal surface they are not designed for sealing in a tube like this. dont use them. This is realy great content thanks.
i definitely would like to know a bit more about which magazines work best in which blasters and why. after you telling me about the slower motor in the gen 9 mags, and the obvious fact my ACR mags are just shite, i'd really like to hear more on the subject.
My go to mag is the high speed gen8 mag. That mag is good for 65rps. You can tell if it's a high speed mag by testing the ohms reading between the mag terminals. This mag will work with the acr and it works really well. The wells mag us only good for 50rps. With that said I've had them fail alot sooner. The gen9 mag is bad. It's has a reduction get inside the mag to make it slow. We don't do slow lol. The j10 acr mag is just crap straight out of the box. It miss feeds and intermittently works at best.
Hope this answers your questions. Check out our FB community page for more blaster talk and info.
@@rpmtechshop8006 cheers man. i dead set keep forgetting to whack my questions up on the rpm page, and it's probably the best place to find answers at the moment lol.
@@EerieBetrayal the community page is your best bet. Lots of good information on there.
Hey mate, I’m considering doing a DSG build in my gen9 but I’m not too sure about the tappet plate because it uses a different one to the v2 gearboxes. From what i’ve heard here they need to be modified. Do you think it would work with the stock tappet plate? Thanks
Definitely get a nylon tappet plate for the gen9. the stock tappet plate breaks the front off from the base.
hi, i am new to gel blaster :D this video has helped a lot on understanding what kinda of upgrade i should get in the near future
(currently own a ACR j10, with 40cm barrel and 1.2 spring)
i am curious in regard to the two piece cylinder / head design, to prevent possible air leak, is it a good idea to actually seal/glue the two part togerther with like silicon or even automotive gasket sealant or such? like, just to be sure there is no way in hell for it to leak O_O
reason i am asking is because in non of the build/mod video i've seen, no one ever talks about actually sealing the two part together permanently, which to me seems like a good idea to prevent leak
Just zip tie it
brown O ring what should call?
Some absolute Gems of Info here! Well worth the watch - thanks for your time mate!
But honestly What gets me the most is how a bunch of backyard Aussies have taken this toy ( of ok design + made from absolute shit ) to what we have now ? - what an achievement , which is because of people like ur self! 👍.
( The gov wouldn’t give us bb’s - so we said “ fuk u ! We’ll make it our own! “ )
It's Aussie ingenuity at its finest.
Thanks for the positive support too! Check out our FB page RPM blasters.
Much respect brother
Now I regret buying my Kriss Vector V2 😭...I should have gone with other blasters that are upgrade friendly. When I bought Kriss Vector V2 I thought its the coolest blaster with all the accessories but now realized it was a mistake buying it since it will have issues in the long run and will die anytime sooner or later 😭
Hello. what do you use the inox lube for?
Lube the piston and O ring
I love this vid. Get gel balls deep lmao.
DSG? What's the acronym for this?
Dual sector gear
Do you have a Facebook page
More air does not mean more FPS it is relative to the air volume of your barrel. Too much creates a decrease in FPS and accuracy.
Yes you are right. It's a bell curve. There will be a point where too much air will create a loss of fps. I should of said the more efficiently you use the air in the cylinder the easier it will be to create fps.
@@rpmtechshop8006 btw great and informative vid mate, great to see people like you out there advancing this sport.
@@Musicman6161 thanks for the positive feedback! If U haven't already check out our Facebook page. Rpm blaster!
@@rpmtechshop8006 as you said @shaady you need to ensure you are working out volumetric pressure as Rowan does if starting to ensure your best barrel to cylinder ratio
alright... so any quests rt..? im gonna ask a little out if topic here. ermmm i've just accidentally shot my eyes. now blindfolded. so when can i see again? anyone with same experiences? pls share. another is..... i'm working on changing to aluminium pipe. why my fps dropped? anyth i did wrong? all others still stock. last i remembered looking into the pipe to search for any obstructions n i accidentaly shot myself