Dear Mr. Handarbeit, Of course you did an excellent job, if you can add this addition then your product can compete in the market place. After rolling sheet metal it becomes a cylinder, then there is a need to take out this cylinder out of the rolling machine, surely you can add a mean to allow the formed cylinder out of your roller.
Wenn ichs nicht besser wüßte würd ich sagen wir sind Verwand (lach) Gleicher Tabak, ähnliches Hemd und auf jeden Fall das gleiche Hobby. Mir gefällt dein Kanal. Mach weiter so
Wife: You spend all day long in the workshop. Why don't you spend time with your family instead. Man: I'm building a metal roller. Wife: And what is that good for? Man: Rolling metal! Wife: You and your silly toys
Very good!!! Nice Job!!! I enjoyed watching your video... Can you share dimensions and center to center distance and diameter of bottom rollers... would like to build one if possible... Cheers and thank you for sharing
Would press-fitting sealed bearing units into the tubes, at multiple depths, be a substitute for the washers+welding+grinding? You could then 'hang' each roller off of a bolt secure in each end wall. To drive the rollers, could you use a single rubber wheel mounted on a high-torque, low-speed motor, with the wheel in contact with both rollers?
Hallo, sehr schöne Arbeit. Was sind das für Rohre Zink oder Edelstahl und welche Materialstärke haben die Rohre? Hast du in den Rohren Unterlegscheiben eingeschweißt weil dort schon ein Loch war. Gruß Ansaat P.
Sorry das ich jetzt erst antworte. Das sind verzinkte Rohre, 1,5 mm Materialstärke. Ja ich habe Unterlegscheiben eingeschweißt. Ich benötige den Blechroller nur um dünne Bleche zu rollen. Sonst mùssten die Rollen stärker ausgelegt sein. LG Roger...
@@derkingbeierwebde Ich meine die Ritzel hätten 13 Zähne. Spielt aber keine Rolle. Wichtig ist das sie die gleiche Anzahl an Zähnen haben da sich die Rollen sonst unterschiedlich schnell drehen.
Couldn't tell for sure but I hope you're not using a grind stone to de-burr soft steel. Не могу сказать наверняка, но я надеюсь, что вы не используете шлифовальный камень для снятия заусенцев с мягкой стали.
Maybe it would be helpful to add small striation marks on both ends of the adjustable roller to make sure both ends are the same height so you dont accidentally roll a small cone lol and maye add a spring on either side also so it will automatically come back up when loosening the set screws on top roller. Nice build though
I need to make this one to save me some money and not get a hunk of junk like i seen at harbor freight tools and if i make it my self i know it wont take a crap like the harbor freight one would and know it will last a long time
Yes, you can do many things yourself and know what you have. Professional tools are expensive and the cheap goods are good for nothing. If I intend to build something for which I need a special tool, I first build the tool ...
Really nice job on the slip roller.👍
nicest DIY build i've seen- only as complicated as is
needed
Finally someone did it with hand tools, no lathe , no mill
Very nice roller, hope your Wife is a excited about it as we are!
Complimenti ottimo lavoro cercavo da tempo un video per calandra fai da te adesso posso costruire la mia
По моему самый простой в исполнении вариант вальцов. Возьму на заметку. Лайк!
EXCELENTE,,GRACIAS POR LA GRAN IDEA ,,MIL ÉXITOS DESDE LIMA PERÚ
Thank you for sharing your simple awesome talent sir...
Лайк однозначно.Просто и удобно.Можно под любой размер себе сделать.
Good
Lo felicito por el trabajo y por su cariñosa esposa👍
Better than the one I made...linking the rollers with old bicycle sprockets makes a big difference (mine wasn't linked and slips a lot). Nice job.
Thanks for your comment...
Motobike sprockets.
Very good idea and nice results, I think that more details could be given for dummies like me in order to make one of these
Deutsche Wertarbeit 👍
Super video
Danke...
Nice work, Mr. Machinist .even got some lovin from the old muffin..
Все гениальное и просто.
Awesome build.
Top.
Danke für Video
Bossman ! Nice job! Un English.... Jefe buen trabajo ! En Español,. Saludos desde México!
Awesome build! Im planning to make one.
класс... такой же собрали только на подшипниках.
Excelente!! de lujo!! saludos desde Argentina.
Gracias y saludos desde Alemania ...
Very nice idea. Simple and effective.
Thanks for sharing. A hug from Brazil. Soft swing music.
Молодец мужик, руки на месте.
Awesome buddy think I’ll give one a go myself 👍👍
bravo ben fatto, ottimo progetto
Gut gemacht. Good job.
Thank you...
Sehr gut, das Teil. :)
Dear Mr. Handarbeit, Of course you did an excellent job, if you can add this addition then your product can compete in the market place. After rolling sheet metal it becomes a cylinder, then there is a need to take out this cylinder out of the rolling machine, surely you can add a mean to allow the formed cylinder out of your roller.
Hello, thanks for the hint ...
excelente trabajo amigo
Muchas gracias
Good work , and idea. Thank you for sharing, and have a good day.
Wenn ichs nicht besser wüßte würd ich sagen wir sind Verwand (lach) Gleicher Tabak, ähnliches Hemd und auf jeden Fall das gleiche Hobby. Mir gefällt dein Kanal. Mach weiter so
Lach..in der Tat nicht nur das gleiche Hobby sondern auch ähnliche Kanäle...
Solange ihr nicht die gleiche Frau habt, ist ja noch alles in Ordnung! 😂😛
7:55 :) Same at every country, even deutschland.
Wife: You spend all day long in the workshop. Why don't you spend time with your family instead.
Man: I'm building a metal roller.
Wife: And what is that good for?
Man: Rolling metal!
Wife: You and your silly toys
Top Arbeit Respekt
Danke schön
Genius saludos desde Argentina contry
Good job sir
Thank you
Nice and simple ... Good job sir...
Grüße aus North Carolina Sehr cool. Wie hält sie sich auf? Ich habe irgendwie die gleiche Idee, aber mit Lagern.
Grüße aus Deutschland zurück. Mit Lagern ist besser. Ich brauche das Teil nicht so oft deshalb reicht das so.
Bravo!!! Excelente herramienta. Un gran trabajo!!!
lo iso con las uñas jajajaj
огромное спасибо за ролик, завтра же начну делать для себя!!!!
Ну как успехи?
Great work..excellent job
Very good!!! Nice Job!!! I enjoyed watching your video... Can you share dimensions and center to center distance and diameter of bottom rollers... would like to build one if possible... Cheers and thank you for sharing
Eselente. Maestro. 👍
sehr gut
thanks for sharing this video......very help full product...
Nice 👍 video personality I appreciate it for teaching us thanks
wow..very sweet, a workshop full of love with his wife
Same, My wifi!
muy bueno caballero justo loque necesitamos
Excellent dear Alles....
Thanks, best disign I have seen yet, great video!
Very nice job
Bravo! Top !!!!!!
10 seu projeto! Muito bom obrigado pela postagem!.
Wery good works 👌
thank you...
Good presentation, not at all tedious as some other videos are!
Thank you...
Well done - easy to build and works well.
Great job.
Buen video... Felicidades.! 🇲🇽
good one
Would press-fitting sealed bearing units into the tubes, at multiple depths, be a substitute for the washers+welding+grinding? You could then 'hang' each roller off of a bolt secure in each end wall. To drive the rollers, could you use a single rubber wheel mounted on a high-torque, low-speed motor, with the wheel in contact with both rollers?
Thanks for the suggestion, unfortunately I had no better idea because I needed the part quickly ...
Hallo,
sehr schöne Arbeit. Was sind das für Rohre Zink oder Edelstahl und welche Materialstärke haben die Rohre? Hast du in den Rohren Unterlegscheiben eingeschweißt weil dort schon ein Loch war.
Gruß Ansaat P.
Sorry das ich jetzt erst antworte. Das sind verzinkte Rohre, 1,5 mm Materialstärke. Ja ich habe Unterlegscheiben eingeschweißt. Ich benötige den Blechroller nur um dünne Bleche zu rollen. Sonst mùssten die Rollen stärker ausgelegt sein. LG Roger...
@@AllesHandarbeit Danke für die Antwort. Gruß Ansaat P.
Keep on rolling baby
Te felicitó buen trabajo👍
Very good demo thank you very much! Your vice seem's to be different is it made by yourshelf?
Good job / love it.
Greenting from México
Thank you...Greetings from Germany...
Awesome build guy
👍👍👍👍👍from Italy ...
Nice work
Fantastic!
I like good worke
Thank you...
MUY IMPORTSNTE
🐿🙏
Hallo, wo bekommt man die Zahnräder und die Kette her?
Hallo, die Ritzel und die Kette sind von einer Schwalbe. Ich habe sie über Ebay bestellt.
OK danke
Wieviel Zähne hat das denn
@@derkingbeierwebde Ich meine die Ritzel hätten 13 Zähne. Spielt aber keine Rolle. Wichtig ist das sie die gleiche Anzahl an Zähnen haben da sich die Rollen sonst unterschiedlich schnell drehen.
OK danke
i love its
thank you...
Very nice
7:54
Sau geil....das kennen wir alle 👍😅
Ja...is irgendwie immer das Gleiche...
Muy bien los vídeo s
Wow nice
Thank you for sharing and everything
Muy buena saludos desde Buenos Aires
Grazie .. dimmi l'angolo usato è 50x50x3 con interasso tubi sotto da 70mm.. thx
bravo
Good job
Thank You....
good job mate
Superb
Toll, sowas werde ich wohl auch bauen.
Die Ritzel haben ein innengewinde?
Hallo, nein die Ritzel haben kein Innengewinde, ich habe eine M12 Mutter aufgeschweisst...
Hammergeil👍
Hallo ,kannst du die obere Rolle entfernen um das Werkstück zu entnehmen?
Nein, die obere Rolle kann ich nicht so einfach entnehmen. Die muß ich dann ausbauen.
Brasil. 👍😉
Couldn't tell for sure but I hope you're not using a grind stone to de-burr soft steel. Не могу сказать наверняка, но я надеюсь, что вы не используете шлифовальный камень для снятия заусенцев с мягкой стали.
A+
QUAL A ENGRENAGEM QUE VC USOU , TA DE PARABÉNS
Very good
Nice work, I covet your vise.
😍😍😍😍
Maybe it would be helpful to add small striation marks on both ends of the adjustable roller to make sure both ends are the same height so you dont accidentally roll a small cone lol and maye add a spring on either side also so it will automatically come back up when loosening the set screws on top roller. Nice build though
Hello, yes you can do it. I don't need this part that often. so that's enough for me ... Greetings from Germany ...
Remove
NEXT
Part
Loading long process...
Give one side clearance...just up and fix next one..
Both is difficult..sir
а я тут голову ломал как сделать вальцы а тут проще простого ))))))
I need to make this one to save me some money and not get a hunk of junk like i seen at harbor freight tools and if i make it my self i know it wont take a crap like the harbor freight one would and know it will last a long time
Yes, you can do many things yourself and know what you have. Professional tools are expensive and the cheap goods are good for nothing. If I intend to build something for which I need a special tool, I first build the tool ...
रोलिंग मशीन हमें भी चाहिए गा तो कैसे ले
Nice 👍