I used a windsheild wiper motor. A homemade petal for forward and reverce makes it fun to work. Thanks as always for an educational video. Gods blessings.
I think when u shared the secret of how to make groves or Bend than one must use their brain rather than asking for dimensions, thanks for sharing the trick or idea.❤️❤️❤️❤️ God bless
You are using bearings for your forms, so why do you need the rods they are mounted on to rotate too....? And what purpose do the gears serve...? Why don't you weld the bearings solid and then put a turn handle on one of the shafts to control your piece rather than push it around manually...? A lot of this project seems pointless...
It's about control of part the idea you have does work if doing repetitive parts but if doing bespoke panels slowness is key ...your way is used for more rolling metal edges both have there own uses but technically do the same job 😂
very educational and very easy to make this tool by this technique. many many thanks to guide through this video, it may be much beneficial to several persons concerned with this job. thankyou very much sir ❤❤❤
After over fifty three years as a Plater welder and most of that as a coded welder, I have to ask: Where the hell have these people learned to weld? Idea's are brilliant but the welding technique leaves me in shock!!
I see guys on UA-cam weld with sandals, no gloves or wrong type of gloves, in shorts, and say, gee! They must have tuff skin or are impervious to burns.
Okay, the metalwork was great, but first of all, to get any strength to thick metal you need to run continuous bead and crank up the welder. You have almost zero penetration, so the welds are prone to cracking. Second of all, why add any gears, when you can't use them? You should have welded the bearings stuck and added crank to the other side. So much unleashed potential in this project
I initially thought you were hating on this guy but it’s hard to argue with your observations and suggestions. You’re right about his welds. A crank would make it less likely to accidentally twist the metal while pushing it through the bearings. It would definitely make the process easier while adding a level of control. Nonetheless, I’m very impressed with his build. Thanks for sharing!
Perhaps those are for an eventual planned upgrade, though it has to be said that they either need to be keyed or shrink fit on the shafts to actually be feasible. That being said, I do need (and will probably make) this thing for clamp weld patch making for automotive sheet metal bodywork, and it is better than nothing, but of course it can and will be done better.
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Thank you for your video. I've wanted a bead roller for some time but can't justify the $3 or 4 hundred dollars for something that will spend most of it's time on a shelf. If the round stock was sized correctly you could add bead roller dies later and buy the louver dies. I think I would add a crank to feed the work though.
I’ve thought about cutting a barbell in half - you find them at the tip or garage sales, good steel that wont bend & has raised part to stop weights from moving.
More popularly known as sheet groove maker, usually used in aluminium sheets (of up to 1mm thickness) for cladding pipelines of extreme temperatures. Great job there kwando. Should've made it a bit more awesome if you added a manual driving mechanism at the end of one of the shafts (where the gears are) for easy feeding in of your sheets instead of pushing them in hard, as well as adding up the U-shaped die (or bearing) aside from that L shaped one you got.
exactly. too hard to push. put a crank on the gear end. but it's not a bad idea, just... not many people have dog gears lying around the house) maybe you don't need them, or half of this tool. just a roller bearing, protruding from the bottom, and a cranked shaft at the top, with a welded bearing on the end. Roller bearing spins as you crank the welded bearing around. less work to build. less weight. no need for gears.
Amazing work, as always!! That final peace you make is beautiful!!! I think im gonna try to put one together. Thanks for you videos!!! Keep it coming!!!!
@@calysagora3615 It really is anoying you cant see the finished peace longer, but as he was about to finish It you cant see It. If you wanna see It more Just hit the pause. I did, It Works!!!!
I was wondering what the gears were for. I was assuming that you were using the outer race of the bearings for the bead profile and were going to weld the bearings solid. But I understand now, the gears are counterbalance.
Not bad...I made my own too along with a half dozen different roller dies...as well as a large support plate. it has a 2 foot throat and is made of box tube. Cost me about 150 bucks in materials
@@KwandoTechnic No, not really....I had to buy the 3 inch bar stock to make the dies.....so that is where a very large amount of the money went. 3 inch 1020 bar ain't cheap....if you want to buy new.
Está muy bueno su invento Socio, le FELICITO. Siga adelante, le tengo una pregunta. Este welder o soldador Usted lo fabricó, lo inventó. Funciona con soldadura de punto o es soldadura de arco?, Yo estoy suscrito a su canal.
You didn't weld the bearings solid so the crank and gearing does nothing. And you can see the shafts aren't turning at all, you just push the metal around.
The bearings are always going to spin. They are bearings haha. I guess it was future proofed so he could add other wheels one day? I don't know kinda weird
I'm sorry but I think you may have misunderstood...the shafts DO turn. The gears are to keep the long shafts level and are to aid in smooth and consistent pressure, while allowing for a large gap to produce larger pieces.
Досмотрел до конца видео, так и не понял зачем самоделке шестеренки? Так как если крутить за валы, то заготовка будет оставаться на месте, за счёт того что подшипники будут проворачиваться.
i don't fully understand this entire build. Since the bearings are doing all the work and turning the cogs would have no effect on the bearings, what exactly does the gears do?
I used a windsheild wiper motor. A homemade petal for forward and reverce makes it fun to work. Thanks as always for an educational video. Gods blessings.
Nice ideas!
Hola
good little project,
well in 30 years of welding I have neve seen a Jabbing Tig welder :)
Thank you!
OMG! Where has this been all my life? Much more precise than air shears or a body saw.
Nice vedio. असेच चांगले व्हिडिओ बणवा धन्यवाद अभारी आहे 👌👍👌👍👌👍👌👍👋🤝👋🤝👋🙏🤝😮😮😮😯😯😯😯🤔😯
You are welcome!
I think when u shared the secret of how to make groves or Bend than one must use their brain rather than asking for dimensions, thanks for sharing the trick or idea.❤️❤️❤️❤️
God bless
Thank you so much! Please see dimensions in video help me. Regards!
You are using bearings for your forms, so why do you need the rods they are mounted on to rotate too....? And what purpose do the gears serve...? Why don't you weld the bearings solid and then put a turn handle on one of the shafts to control your piece rather than push it around manually...? A lot of this project seems pointless...
Yo también me quedé pensando para que son los engranes si los baleros no los seguirán ?
@@m0parnut you said the same i thought
It's about control of part the idea you have does work if doing repetitive parts but if doing bespoke panels slowness is key ...your way is used for more rolling metal edges both have there own uses but technically do the same job 😂
very educational and very easy to make this tool by this technique. many many thanks to guide through this video, it may be much beneficial to several persons concerned with this job. thankyou very much sir ❤❤❤
Excelente tutorial y muy efectivo. Muchas gracias maestros
You are welcome!
Wow super love and support from South India
Welcome and thank you!
I like it very much. Well done and nice tool. I am also quite impressed by the precision with how you use that tool at the end of the video.
Yes, thank you so much!
Absolut TOP Work !!!! Thank you for showing 👍👍👍
Thank you!
Jesus, you're precision in the last minute was incredible. Kudos to you, you sheet metal van Gogh
Haha, thank you so much!
This act should be continue so that technical will be motivated thank u
Thank you so much!
Оригинально и просто! 👍👋 Original and sample!
Thank you!
Уёбищно и не функционально.
Молодец уважаю людей которые своими руками делают полезные приспособления👌😊
Thank you so much!
P
Сделано говно, которое может восхитить только предельно тупых.
Parabéns ficou top.👏
Muy buen equipo y un fino detalle para la herreria
Thank you so much!
Sangat istimewa pembuatan penuh dngn ketekunan 😊
Thanks!
Excellent!!!!!!!!!!!!!!
Thank you!
Kkuiii
L.l8ululLi.
Me encantó la explicación,bien claro.felicitaciones..me lo voy a tratar de copiar
Nice job Sir
Many thanks!
I think the pressure needs to be even out on the surfaces. What an amazing video🇮🇳 love from india
Thank you so much!
@@KwandoTechnic keep us posted
After over fifty three years as a Plater welder and most of that as a coded welder, I have to ask: Where the hell have these people learned to weld? Idea's are brilliant but the welding technique leaves me in shock!!
Yes !! As a woman I was thinking that is the coolest welding tool I have ever seen. I think that I could even use it.
I see guys on UA-cam weld with sandals, no gloves or wrong type of gloves, in shorts, and say, gee! They must have tuff skin or are impervious to burns.
It’s like they don’t know what a weld bead is…
Amazing brother...👍👍
Thanks!
Very very best job LOVE your style of work 👍👌👍
Thank you so much, bro!
may i help you
I don't download received.
Great job 👍 guys
Thanks!
Okay, the metalwork was great, but first of all, to get any strength to thick metal you need to run continuous bead and crank up the welder. You have almost zero penetration, so the welds are prone to cracking. Second of all, why add any gears, when you can't use them? You should have welded the bearings stuck and added crank to the other side. So much unleashed potential in this project
I initially thought you were hating on this guy but it’s hard to argue with your observations and suggestions. You’re right about his welds. A crank would make it less likely to accidentally twist the metal while pushing it through the bearings. It would definitely make the process easier while adding a level of control. Nonetheless, I’m very impressed with his build. Thanks for sharing!
Perhaps those are for an eventual planned upgrade, though it has to be said that they either need to be keyed or shrink fit on the shafts to actually be feasible.
That being said, I do need (and will probably make) this thing for clamp weld patch making for automotive sheet metal bodywork, and it is better than nothing, but of course it can and will be done better.
DdddddddddddddddddddddddddddddddddDDDDDDDDDDDDDDDDdddddddddddDDDDDDDDDddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddďddddddddddďdddďddďddďdďďdďdddddddddddďddddddd
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Thank you for your video. I've wanted a bead roller for some time but can't justify the $3 or 4 hundred dollars for something that will spend most of it's time on a shelf. If the round stock was sized correctly you could add bead roller dies later and buy the louver dies. I think I would add a crank to feed the work though.
Many thanks for your opinion!
I’ve thought about cutting a barbell in half - you find them at the tip or garage sales, good steel that wont bend & has raised part to stop weights from moving.
Ilmunya sangat bermanfaat ohm 🙏terima kasih ya ohmm 🙏salam kenal ohm 🙏🙏
Thank bro so much!
Really great work you guys show's how fun welding can be great work keep it up
Thank you so much!
@@KwandoTechnic do you make some for sale?
Buen trabajo muy bonito Saludos desde Nicaragua Johnny Guardado
Thank you so much!
Phenomenal!! 👍👍
Thanks!
¿ y los engranes que funcion hacen ? Si los que giran son los baleros.
Nice idea 👍👍👍
Thanks!
More popularly known as sheet groove maker, usually used in aluminium sheets (of up to 1mm thickness) for cladding pipelines of extreme temperatures. Great job there kwando. Should've made it a bit more awesome if you added a manual driving mechanism at the end of one of the shafts (where the gears are) for easy feeding in of your sheets instead of pushing them in hard, as well as adding up the U-shaped die (or bearing) aside from that L shaped one you got.
Many thank for your suggestions!
Drill and tap a shaft on each side that the handle can screw into
exactly. too hard to push. put a crank on the gear end. but it's not a bad idea, just... not many people have dog gears lying around the house) maybe you don't need them, or half of this tool. just a roller bearing, protruding from the bottom, and a cranked shaft at the top, with a welded bearing on the end. Roller bearing spins as you crank the welded bearing around. less work to build. less weight. no need for gears.
You mean bead roller
@@DC-te1gw that's kinda how the ones from the 70s were
Very cool...thank you for sharing this with us...
You are welcome!
HI BRO THANKS 4 SHARING YOUR VIDEO IT IS AMAZIN AND EASY TO MAKE IT SALUDOS from oaxaca mexico
You are welcome!
@@KwandoTechnic ggg
muy muy muy buen video gracias saludos desde buenos aires
Thank you so much!
Muito bom 👏👏👏 Frizzo perfeito. Parabéns legal massa 👍
É mesmo!
W
Loter manual sngt Quality 👍🤝 indonesia 🇮🇩
Thanks!
Hi. First of all, congratulations on a very nice job. I would like to make the structure myself maybe you could give the dimensions?
Please see dimensions detail in video help me. Thank you so much!
Ĺ6
GOOD JOB
Thanks!
Muito bom gostei 👏👏👏👏
Gas to diesel:-)
Awesome skill, thanks 💯❤️
Thank you!
I do really appreciate your job. Keep it up. By the way, what' is d description of your solder weld. I love that. Is that expensive?
My welder is cheap and small. You can refer my welder at here: bit.ly/30T55h0
It is a TIG welder with cheap steel filler wire. Looks funny speed up in the video.
.
ความคิดสร้างสรรค์สุดๆ
Thank you, guy!
Nice job
Thanks!
Outstanding, innovative and very efficient! Subscribed.
Thank you so much!
@@KwandoTechnic .
Amazing work, as always!! That final peace you make is beautiful!!! I think im gonna try to put one together. Thanks for you videos!!! Keep it coming!!!!
Thank you so much!
How could you tell with all those video links covering the end result???
@@calysagora3615 It really is anoying you cant see the finished peace longer, but as he was about to finish It you cant see It. If you wanna see It more Just hit the pause. I did, It Works!!!!
Most useful device for design and construction works,
Just amaizeing, wonderful.
Good Job Bro..Hilario linglingen here in Philippines
Thank you!
perfect , thanks for sharing with us.
Lo felicito amigo está muy buena,
Tuyệt vời quá bạn.
Hướng dẫn đầy đủ số đo sẽ tuyệt vời hơn nữa ạ
Many thanks for your opinion. I tried provide my measurements to everyone.
So could you tell us again, what purpose those gears/sprockets in the other end serve, when you are using roller bearings?
It kept system more balance.
@@KwandoTechnic oh ok, I was wondering.
Good job...👍👍👍👍👍
Thank you!
It would be good to demonstrate what you are trying to create, otherwise the steps end up looking like witchcraft
ತುಂಬಾ ಚೆನ್ನಾಗಿದೆ.. ಅಧ್ಬುತ
Many thanks!
Impecable trabajo 👏
Thank you so much!
Amazing ide... 🙏🙏
Thank you!
Thought it would never happen, but finally saw an Angle grinder in action with its guard on.
Its all about those eyes!!!✌
Yeah really , that's good.
Hello i am a yelder and ai dont bot the guard on hhh lol
6@@vintygti 4 ；444771
4774还
nice tip brother God bless you
Thank you so much!
I was wondering what the gears were for. I was assuming that you were using the outer race of the bearings for the bead profile and were going to weld the bearings solid. But I understand now, the gears are counterbalance.
Thanks!
Ide kreatif banget,,salam seniman api from Indonesian,,
Sorry, I'm not Indonesian.
I have done a lot of sheet metal work but not with this type roller. Do you have dimensioned drawing that I can get from you?
Sorry sir, I don't have dimension to send you. Please see detail in video, I showed all of dimension in video. Sorry about this inconvenience!
Not bad...I made my own too along with a half dozen different roller dies...as well as a large support plate. it has a 2 foot throat and is made of box tube. Cost me about 150 bucks in materials
Too expensive. I made it less than 70$.
@@KwandoTechnic No, not really....I had to buy the 3 inch bar stock to make the dies.....so that is where a very large amount of the money went. 3 inch 1020 bar ain't cheap....if you want to buy new.
Ottimo attrezzo, ancor meglio se fosse motorizzato. 👏👍
Muy bueno voy a probar si me sale .gracias
Thank you so much!
Bom dia MESTRE, você é o cara... Genial.
Many thanks!
Dagdag ka alaman balak ko pa naman mag aral mga ganyan...salamat
You are welcome!
what is the cutting disc you are using and brand of discwhat is the cutting disc you are using and brand of disc
Excelente Canal 👏👏👏👍👍👍
Thanks!
BRAVO, BRAVO, BRAVO! 💕🙌
Good job.. i am from indonesia
Thank you!
I've never seen a TIG torch used like this...
A propfor
A
A
Aaaaqa
Tay nghề cao.!!! 👍💖
Thank guy!
Está muy bueno su invento Socio, le FELICITO. Siga adelante, le tengo una pregunta. Este welder o soldador Usted lo fabricó, lo inventó. Funciona con soldadura de punto o es soldadura de arco?, Yo estoy suscrito a su canal.
Thank you so much! You can see my welder and order at here: bit.ly/30T55h0
Kkk ele é genial mas acho que não conseguiria .
Es soldadura TIG
Very good. You can also modify with the gear and put a handle
In which you can turn it Like in the bead roller.
Many thanks for your suggestions!
Даёшь приспособу профлист катать)!
My best respectation! Cool!
Thank you so much!
You didn't weld the bearings solid so the crank and gearing does nothing. And you can see the shafts aren't turning at all, you just push the metal around.
The bearings are always going to spin. They are bearings haha. I guess it was future proofed so he could add other wheels one day? I don't know kinda weird
Que bien me gusta ver como elabora está herramientas felicitaciones a quien elabora estos trabajos Que Dios los Bendiga
Thank you so much! Please keep support me!
did i miss something? if the bearings are rolling whats with the gears on the other end of the shaft?
Super work
Thank bro!
Brilliant love it
Very nice. Simple but effective!
Many thanks!
So what’s the point in having drive gears when your shafts don’t even turn? I think you confused yourself.
I didnt think I'd be alone with that question. Shafts don"t turn just the outer bearing race?? Like he started down one path and ended on another.
exactly... i thought the same.
I'm sorry but I think you may have misunderstood...the shafts DO turn. The gears are to keep the long shafts level and are to aid in smooth and consistent pressure, while allowing for a large gap to produce larger pieces.
And there is the option to have it motorized in the future
Good work I like it too much
Thanks!
Да это просто чудо
Good job 👍
Досмотрел до конца видео, так и не понял зачем самоделке шестеренки? Так как если крутить за валы, то заготовка будет оставаться на месте, за счёт того что подшипники будут проворачиваться.
Что-бы не "проскакивало" и не "перекашивало".
Patch в смысле проскакивало если Валы в трубке проходят
Тоже не догоняю шестерни зачем
Very good. Thank you
Thanks!
is good you pressing, new ideas for job....(no speak inglish)
Thank you!
very good job brother
Thanks!
Still I dont get it why he used gears on one side when another side has bearings?
The gear make system balanced.
@@KwandoTechnic каким образом шестерни балансируют систему, если валы, на которых они крепятся, не вращаются?
It is a Bead Bearing Roller. Very OLD school.
It's in books. You prolly don't know about them.
As demonstrated, the gears are doing nothing.
The gears are for balance..if it possible to install handle in the gear for easy movement..
Home Made stell metal mantap 👍👍👍
Many thanks!
i don't fully understand this entire build. Since the bearings are doing all the work and turning the cogs would have no effect on the bearings, what exactly does the gears do?
Great bro i like it it too much
Thank you!
Me pareció, o soldó sin argón? Lo único que me intriga!
Também nunca t
Top bela ferramenta e belo trabalho...top
Thank you so much!