So a serious question for you guys. I'm an old man 70+ and we do not off road at all. But we live in farming/small town USA near the famous Shiner Bock brewery. So, in the spirit of community, helping my neighbors; am considering a front bumper w/winch, OR rear hitch with a "D" ring. In 10+ years have encountered people lose control and needing help getting pulled out, but we had to pass them on. I do have a 2018 F250 FX4, I use for hauling equipment during shredding season. So here I present two options for a winch. Either the 4rnr or the F250. Yes, I know it depends on circumstances and the odds of encountering situations where a winch is needed. I have even gone back and get my tractor to pull people out of a ditch. As you can see, the winch question is being asked by one not a over lander, off-road guy nor a apocalypse prepper. So opinions will be wild and varied, I'm ready for that and appreciate the insights from a variety of people. Thanks again folks!!!
Any idea if the Smittybilt xrc 9500lb winch would fit? I’m mostly concerned about the solenoid as it seems to be about bigger than the one you mounted.
Nice video!!! Your video is the reason why i bought the bumper.. I just want to point out a very important information.. Here in Canada, 2022 offroad comes with front cam and sensor.. Now the bumper interfere with the sensor. There is no offroad premium in Canada.. Maybe you have an idea to help me fix this issue? Thanks in advance...
I got a Westin low pro bumper and my mechanic asked if the bumper itself (not the bull bar) would interfere with the adaptive breaking sensor system on my 5th Gen ORP. Anyone install this bumper and have any issues?
Shop in my area wanna sell me the same bumper for $1240 and when I showed him that it’s cos $300 less than that he just told me that those they come without hardware!! Wth is he talking about !!
Yes it does with the TRD Skid Plate! Let us know if you'd like us to check inventory and timing on the bumper. Here's the link on our website: www.motoroso.com/p/1983229-westin-universal-pro-series-front-bumper-textured-black?lid=1806261
We didn’t measure it before and after, but the total weight is ~120, it didn’t seem to affect the stance at all. The 4Runner had a leveling kit on it already. Stance looks good.
This is designed for the 2014+ 4Runners. When you say "facelift", I'm not sure what you mean. But my assumption, is that it will not work, and sadly Westin does not make this for the earlier models.
About 85 lbs without the bull bar. +5-7 lbs for the bull bar. Winch weighs 60 lbs. Light bar would be under 5lb. So all told, as we installed it here, winch, bumper and light, between 145-155lbs.
@@Motoroso I have a 2018 TRD Pro with Bilsteins. When you added the steel bumper, winch, and light bar, did this cause the front end to drop due to the additional weight? If so, by how much did it drop the front?
So a serious question for you guys. I'm an old man 70+ and we do not off road at all.
But we live in farming/small town USA near the famous Shiner Bock brewery.
So, in the spirit of community, helping my neighbors; am considering a front bumper w/winch, OR rear hitch with a "D" ring.
In 10+ years have encountered people lose control and needing help getting pulled out, but we had to pass them on.
I do have a 2018 F250 FX4, I use for hauling equipment during shredding season.
So here I present two options for a winch. Either the 4rnr or the F250.
Yes, I know it depends on circumstances and the odds of encountering situations where a winch is needed. I have even gone back and get my tractor to pull people out of a ditch.
As you can see, the winch question is being asked by one not a over lander, off-road guy nor a apocalypse prepper.
So opinions will be wild and varied, I'm ready for that and appreciate the insights from a variety of people.
Thanks again folks!!!
Any idea if the Smittybilt xrc 9500lb winch would fit? I’m mostly concerned about the solenoid as it seems to be about bigger than the one you mounted.
What a pleasure to watch you guys work. You’re doing an awesome job! Such great products and service!
I am looking for a front bumper for my 2022 4 Runner. I have looked at the Westin and Cali Raised Stealth. Looking for feedback. Anyone?
Nice video!!! Your video is the reason why i bought the bumper.. I just want to point out a very important information.. Here in Canada, 2022 offroad comes with front cam and sensor.. Now the bumper interfere with the sensor. There is no offroad premium in Canada.. Maybe you have an idea to help me fix this issue? Thanks in advance...
I got a Westin low pro bumper and my mechanic asked if the bumper itself (not the bull bar) would interfere with the adaptive breaking sensor system on my 5th Gen ORP. Anyone install this bumper and have any issues?
I have a 2021 with the adaptive cruise control would I still be able to install this bumper the way it is in the video?
Can you get this without the Bull bar? Cuz I have a sensor upfront and I think it will mess with it
only if you guys weld a plate on the round bull bar would look really nice just like the C4 high bull bar
ordered the bumper without the bull bar. I think if Bull bar was higher we could get the TSS to work I may try that later.
Thank you guy for the info. I am going to put that on my 2021 Venture.
does the bull bar interfere with the TSS?
Yes, both types of bull bars interfere with the TSS
Shop in my area wanna sell me the same bumper for $1240 and when I showed him that it’s cos $300 less than that he just told me that those they come without hardware!! Wth is he talking about !!
We sell those bumpers with hardware, so I don’t know. We’d love to earn your business.
does this work with Toyota TSS? Or will the bull bar interfere? Is it possible to move the TSS down a bit to make it work with the bull bar?
No, both bull bars interfere with TSS.
how sturdy is the bullbar?
Hi what is the installation time on this please ?
Does the bull bar block camera
I would love more info for my 2016 runner
will this bumper work with the TRD Front Skid plate?
Yes it does with the TRD Skid Plate! Let us know if you'd like us to check inventory and timing on the bumper. Here's the link on our website: www.motoroso.com/p/1983229-westin-universal-pro-series-front-bumper-textured-black?lid=1806261
How on earth you footed the grill back on?? Can’t seem to get mine back on after adding the same Westin bumper 😰😭
Fitted*
It’s s struggle! Took a bit of time.
I’ll try it again tomorrow. If not taking to shop lol. Thanks
Great video. How much did this setup drip the front end?
We didn’t measure it before and after, but the total weight is ~120, it didn’t seem to affect the stance at all. The 4Runner had a leveling kit on it already. Stance looks good.
Will this work with a 2010 that had a facelift?
This is designed for the 2014+ 4Runners. When you say "facelift", I'm not sure what you mean. But my assumption, is that it will not work, and sadly Westin does not make this for the earlier models.
What is the weight of this bumper please
About 85 lbs without the bull bar. +5-7 lbs for the bull bar. Winch weighs 60 lbs. Light bar would be under 5lb. So all told, as we installed it here, winch, bumper and light, between 145-155lbs.
@@Motoroso I have a 2018 TRD Pro with Bilsteins. When you added the steel bumper, winch, and light bar, did this cause the front end to drop due to the additional weight? If so, by how much did it drop the front?