Looks like it will move but that clutch will not last with all that weight unless you live in a totally flat neighborhood. It will be a good time watching you build it. Looking forward to the suspension!
@@gerbourke1952 more accurate than using wood , and now post covid with all the screens in the shops getting taken down it could be a good time to stock up with perspex as well.
You should cut some pipe that fits your bolts and weld them to your motor plate instead of all of them nuts. Looks good man can’t wait to see move great ideas
He knows what he's doing but unlike others writing if they being crule or joking others are friendly others just joking I can tell others hard to tell cause seems real but you more down to earth and like it and not cruel at all friendly and have opinion i like that but I think he's doing it to make it more sturdier like robots to make building sturdier
Yes me and you both like this guy he's giving us ideas and he's an inspiration to little kids and youth that can do this and not getting in trouble just building these yes we like this guy he's a hero of our society he's really motivating us like euroupeans did if we look at what they did
Убил бы. Я от наждака после правки резца отхожу, воздухом обдуваюсь, не дай бог хоть одна песчинка на станину опадет. Сальники направлявляшек каждую пятницу мою, а то и меняю. Станок 16к20 1979года,на метре 2сотки конус.
I love this idea. I am gearing up to cast an adapter out of aluminum to mate my opposed twin experimental aircraft engine to a flywheel and clutch for a MGB transmission and then to a driveshaft and rear for a replica 1928 Morgan RIP GN special hillclimb racer. I may do it your way. I wil be video-ing it either way.
Cái côn đó có vẻ không ổn bạn ạ . Liên kết giữa động cơ và hộp số nhờ vào lực quán tính của mấy búa văng bên trong cái côn đó mình sợ tải nặng không tải được .
@@Techchannel91 có thể bạn sẽ không vào số được khi máy nó chạy . Vì bản chất nó không phải là li hợp .mình chỉ góp ý trên những gì mình được biết . Còn thực tế bạn sử dụng bạn sẽ hiểu :)
Nếu tui đoán ko nhầm hộp số xe 500kg..vậy thì phải qua hộp giảm tốc mới chạy nổi...góp ý cùng bạn để cùng nhau phát triển đam mê...tui khoái lắm mà ko có tg
Ok you have a lathe and machining skills. Please make proper spacers, after everything you made you used nuts as spacers. The nuts make it look horrible. Otherwise it's very cool.
great job, i have a question ,can i use a automatic gearbox instead of manual gearbox in a similar gokart which i am making almost compliant . will it work ? any suggestion from any body is welcome
I don’t see the point in the adapter plate, because it would be possible to put on chains or belts, the second would be even better, because the centrifugal, for example, in this case, will not live long and will quickly fail
У них мышление другое. Да и соосность там , плюс минус полметра, поэтому им похрену, что соединять, лишь бы соединить, а там трава не расти. , он думает, что соединив через проставки мотор, он достиг центрации. Бублик резиновый, соединил бы это , за пару минут, при этом соосность там , вообще на глаз может быть. Прежде чем что то делать, нужно им книжки умные читать, по компоновке, и соединении агрегатов. Альфа Ромео, Вольво, мотор впереди, коробка сзади. Первое через бублики, второе через сайленты , через трубу.
..or go buy a semi-knackered Suzuki Vitara & cut off the bits you don't fancy. It was all trés Gucci till the nuts & bolts thing - but strikes one (this one anyway) as all a bit "Let's re-invent the wheel, only more rubbisher..." meh.. each to their own. I'd just go buy a tired Honda quad & get the "I must have 4wd!" thing out of my system that way - but then I don't have a lathe... which might be a blessing tbh..
Looks like it will move but that clutch will not last with all that weight unless you live in a totally flat neighborhood. It will be a good time watching you build it. Looking forward to the suspension!
All depends on gearing honeslty. But that clutch is cheap and easy so it shouldn't be a huge deal.
Held up better than I thought that it would. Hell yeah.
Who cares
هربجي كردستان
هربحي كردستان
Привет с РОССИИ !!! Для такого грузовика , с такой муфтой далеко не уедешь , а так четко , компактно.
To mark out the wood/ plate, put it flat on the bench and stand the gearbox on it, it is easyer and you can mark all round in one shot.😀 .
I thought he was going to use a spray can, easy and precise for perimeter and holes
vv
@@tungamiraimsipa1424 not a bad idea, and accurate, you wouldn't need a heavy coating either, just enough to mark it☺.
What I have done in the past was used some transparent perspex to make the template for the adapter plate.
A child could mark it out even
@@gerbourke1952 more accurate than using wood , and now post covid with all the screens in the shops getting taken down it could be a good time to stock up with perspex as well.
Knp tdk SMP selesai mas bro. Sehrusx vidiox di singkat aja spy ckp wktu
You should cut some pipe that fits your bolts and weld them to your motor plate instead of all of them nuts. Looks good man can’t wait to see move great ideas
Well he doing good maybe he needs bolts to keep it really strong fit and not to.let it come apart it's like putting on robots to keep things together
He knows what he's doing but unlike others writing if they being crule or joking others are friendly others just joking I can tell others hard to tell cause seems real but you more down to earth and like it and not cruel at all friendly and have opinion i like that but I think he's doing it to make it more sturdier like robots to make building sturdier
I like his works
Yes me and you both like this guy he's giving us ideas and he's an inspiration to little kids and youth that can do this and not getting in trouble just building these yes we like this guy he's a hero of our society he's really motivating us like euroupeans did if we look at what they did
Also from way back when 1950s 1800s 1700s etc
미션과 엔진사이 여러개의 볼트를 끼울게 아니라 선반에 합당한 와셔를 만들어 끼웠으면 좋지않을까 ?
Mantap ide nya..semoga sukses..
Lỡ chơi rồi sao làm côn tự động bồ mũ bộ bố nồi chế vào chạy cho ngon ☺️☺️
Very good ❤️ like1
Luar biasa pa bos sukses.... 👍👍👍👍❤❤❤
Menginspirasi buat anak2 muda bro ,bagus banget . lanjutkan
Thanks for sharing
My friends
וואו כל הכבוד לך איזה עבודה 👍👍👍👍👍
I like what I’m seeing but was wondering what the front and rear differentials were out of, and also the transmission? Thank you a lot
In the future, do not sand the gearbox with the angle grinder, but it is better to wash it with diesel fuel.
Ну не знаю !!! За труд усердие лайк !!👍👍🛠🛠
Нельзя пользоваться абразивным инструментом вблизи станка, если хотите сохранить направляющие в рабочем состоянии
Убил бы.
Я от наждака после правки резца отхожу, воздухом обдуваюсь, не дай бог хоть одна песчинка на станину опадет. Сальники направлявляшек каждую пятницу мою, а то и меняю.
Станок 16к20 1979года,на метре 2сотки конус.
Ide yg cenerlang saya salut dan suks
Khớp nối 2 chữ u phải cùng trên 1 mặt phẳng ngag mới chạy được bạn!!
Vậy ak a. Chéo thì có sao ko nhỉ
@@Techchannel91 khi vận hành nó bị xoán không đồng trục
Thanks your content ,iam from indonesia
Mesin bubutnya ga senter ,chucknya goyang bro
Thank you for part 10
I love this idea. I am gearing up to cast an adapter out of aluminum to mate my opposed twin experimental aircraft engine to a flywheel and clutch for a MGB transmission and then to a driveshaft and rear for a replica 1928 Morgan RIP GN special hillclimb racer. I may do it your way. I wil be video-ing it either way.
You’re a really talented builder! what rear axles / rear end was used?
You can see at the 2.00 min mark that the splined shaft is lop-sided on the lathe jaw while being machined.
Yeah that's not worth a shit or strong at all . And the welding is crap.
I saw the same thing too.
@@midixiewrecked7011 Built in Vietnam, so it's pretty much Chinese quality.
The yokes on the drive shafts aren’t aligned, there will be a lot of vibration ☹️
Mantap teman...
Gostei da caixa de marcha ficou ótima só q vc perdeu a embreagem centrífuga quando ela acabar vai ter q soldar tudo de novo
Parabéns 👏
okybrobikinpenadaran
Cái côn đó có vẻ không ổn bạn ạ . Liên kết giữa động cơ và hộp số nhờ vào lực quán tính của mấy búa văng bên trong cái côn đó mình sợ tải nặng không tải được .
b thử chưa nhỉ. hoặc biết loại nào lớn hơn ko chỉ e với
@@Techchannel91 có thể bạn sẽ không vào số được khi máy nó chạy . Vì bản chất nó không phải là li hợp .mình chỉ góp ý trên những gì mình được biết . Còn thực tế bạn sử dụng bạn sẽ hiểu :)
Khoan sắt dầy add cho ít dầu vào để dễ khoan và bảo vệ mũi add ơi.
có mà
Есть токарный!!! Трудно было сделать проставки? Токарный станок стоит...
Чет все сделано по мутному,можно было сделать полнорабочее сцепление.
Sir I'm big fan u .from india
Thank you very much
I think Vietnamese or thailand letters look thailand india is more wild like cherokee or arab mixed like cherokee
I think I’d put a little longer slip yoke in that driveline. How much suspension travel are you putting in that 4x4?
the differential won't be traveling.
FR駆動の原付車を4WDにする為めに、この動画を見に来ました。
速さも楽しいが走破性能に重点を考えています。
( =＾ω＾)
作る楽しさを有難うございます。
Its ok. Mantap..👍👍👍
Nếu tui đoán ko nhầm hộp số xe 500kg..vậy thì phải qua hộp giảm tốc mới chạy nổi...góp ý cùng bạn để cùng nhau phát triển đam mê...tui khoái lắm mà ko có tg
Thì bộ số này là bộ giảm tốc đó a
Very nice and clean workplace. Good morning 🌞
Ain't it just ain't it 😎 Git er done Bro.
Сделай пожалуйста нормальный переход от коробки к двигателю. Набор гаек это ненадежный метод!
Это временно. Трудно догадаться?
MANTap bosssz
All that great job to mess it up at the end with those nuts instead of do it right.
прям все ремонто пригодное и супер сварка всех узлов такое ощущение что не отебись делает
И болгаркой работает не накрывая направляющие для продольной
@@raufrakhimov9382 гаек нахуявертил можно втулки или шпильки нормальные поставить.колхоз короче😂
Это он ниву собирает походу
Конструктор на одну поездку.
Так и делает. Рукожоп потому что.
Good like......👍👍
I like video....
Sukses bro....
je voudrais voir les premiers (et derniers) tours de roues... J'adore le montage de la boite transfert à l'envers!
It will be not good. Everything is to small. Not enough strong.
*too
@@midixiewrecked7011 you're wrong
@@shortycummins about?
GoodGood I like very Good
How are you going to service the clutch if need be?
Simple disassembly, sir
@@Techchannel91 Вы стопор вообще то внутри заварили.
Ok you have a lathe and machining skills. Please make proper spacers, after everything you made you used nuts as spacers. The nuts make it look horrible.
Otherwise it's very cool.
Lllĺĺpþ
Should have included a lovejoy coupler.
It is not suitable when it wants to stop. No break can move when the engine is running. The car moves without stopping
Вместо набора гаек выточил бы простые удлинители ....
Это задумано, но не продумано....
Mantapnyaaa
Parabéns pelo trabalho
I like it. God working
There was a lot of play in the input shaft of the transmission. That's not good at all
great job, i have a question ,can i use a automatic gearbox instead of manual gearbox in a similar gokart which i am making almost compliant . will it work ? any suggestion from any body is welcome
ok đấy em
Você é muito bom nisso amigo.parabens pelos seus projetos.
Nous avons besoin de voir la partie de la fonctionnement de l'embrayage svp
Sweetheart and cool content bro
Yep he does super good
Amazing please stop by Coffe together
Anyone know what the transmission is out of or the differentials?
Is this just a mock up? If not I wouldn't expect longevity.
С первых кадров уже все гениально 😂😂😂возьми для начала справочник молодого токаря 🤔✌
Спасибо
@@Дарханнахрад-п3и )
@@Дарханнахрад-п3и автоперевод по фото, скрину.
o cara tem um torno e faz aquela gambiarra com as porcas, deus o livre eim
U r my inspiration👍
you shouldve used the fly wheel and clutch from original engine
Would have been too heavy.
Way to heavy.... And once you got up in the RPMS it wouldn't come down very fast if at all. The velocity of a 10+lbs flywheel would eat the engine.
gonna need a LOT more power than than!!
Kurang bagus,rengny yg ditengah, YG bgs pipa brooo
PR banget untuk perbaikan dinamo staternya
Good very niceee👍👍👍👍
Please add your Part 1-10 (completely finished) in every description part. Thank you.
First like malayali
I don’t see the point in the adapter plate, because it would be possible to put on chains or belts, the second would be even better, because the centrifugal, for example, in this case, will not live long and will quickly fail
why don't you continue to build that 4x4 car so that we can drive to the cruising road
Tết có xong đc ko bác
Sắp xong rồi a
I wonder how it would be if he put a flywheel in between the gearbox and Engine
Работать небудеть,кардан собран неправильно.
No Clutch disc,preasure plate, ,release bearing, ? How many motnths it will last? everyday use?
I did not see a keyway on the engine shaft whats to stop the clutch from freespinning on the engine shaft when revs are applied ,
Very very good, but finesh it.
Pakai axle apa bos
почему нельзя было сдвинуть мотор от оси кпп и утопить всю конструкцию? чтобы плита именно стыковала кпп/двс
У них мышление другое. Да и соосность там , плюс минус полметра, поэтому им похрену, что соединять, лишь бы соединить, а там трава не расти. , он думает, что соединив через проставки мотор, он достиг центрации. Бублик резиновый, соединил бы это , за пару минут, при этом соосность там , вообще на глаз может быть. Прежде чем что то делать, нужно им книжки умные читать, по компоновке, и соединении агрегатов. Альфа Ромео, Вольво, мотор впереди, коробка сзади. Первое через бублики, второе через сайленты , через трубу.
Chế cho e cụm côn như a với.
Mua thôi chứ cần j chế
..or go buy a semi-knackered Suzuki Vitara & cut off the bits you don't fancy. It was all trés Gucci till the nuts & bolts thing - but strikes one (this one anyway) as all a bit "Let's re-invent the wheel, only more rubbisher..." meh.. each to their own. I'd just go buy a tired Honda quad & get the "I must have 4wd!" thing out of my system that way - but then I don't have a lathe... which might be a blessing tbh..
oooh noooo wipe all the abrasive dust off that lathe bed!!!!!!!!!!!!!!!!!
Này xem chơi thôi chứ nó sẽ bị phá hủy khi hoạt động tại vì ly hợp không đồng tâm nó rất là lắc,bạc đạn vòng bi sẽ bị banh xác vì nó.😂
good creative
You've got that tool sticking out way to far... Shorten it up and slap a magnet on tool post and no more chatter.
Needs grease fitting for clutch bushing
Tiện mấy con ốc thay vào chứ nhìn bạn bỏ ốc tán vào ghê quá
Annoying to watch with the yellow crap on the video?
Chất quá
Cục mítu có bán ko a
Mình lại để dùng máy phát điện rồi bạn ạ
8tr bạn có mua không
@@xeche3.4banh89 thấy video b đăng 3 củ mà hehe. Hét giá e thế
Muy ingenioso . Debería usar agua y jabón también.
Tại sao ko dùng cacdang mà lại phải gắn dính vào như vậy hả a
Good job
best bro
thank Bro
So a non serviceable clutch and sprocket. Nut for spacers instead of pipe. I’m not sure what you did to that output shaft, but okay 😵💫
Gilak jenius bgt
Chuẩn đấy
Bsr , pourquoi vous ne Montrez pas la partie de l'embrayage