Love how lift kits are backwards. Ones good for off road use are expensive and will never be ran hard. People who off road a lot buy cheap and it’s not really built as strong for off road
Props to you guys for showing the suspension angles. Fyi Chevy forums been talkin and suspension angles are the topic. Most guys just want big tires and don't understand the cost of reliability/ safety. And with the electronic rack on these GM trucks you wont notice your suspension is toast until its too late. Cheers to you guys!
I’ve been asking around for the longest if it’s possible to get a different struts/shocks system with the Mcgaughy’s lift kits for a 1500. This video had made my dream come true!
I’ve got the 7-9 mcguaghys lift with 2 in spacers on all 4 wheels but my front two tires are poking out more than my rear tires. Will a 3.5 in spacer for the rear tires give it that flush look and equal out the poke?
Just gotta measure out the poke in the front compared to the rear to get them equal, so its possible that a 2" up front and a 3.5" in the rear would make them equal depending on setup
So I have a 2017 GMC sierra SLT all terrain crew can 4WD and I'm looking I to buying the cheaper mcgaughyslift kit i think its like $1791 on ur page I just wanted to run the 7" but was wondering if I need after market upper control arms and not sure if my control arms are stamped steel or almunium.
Did yall take care of the powercoat or did he outsource before he got it installed? And is is the video or does that truck look smaller them what i thought 9 inch lift would be?
Quick question I just bought 7to9 Mcgoughs lift kit from custom offset,set at 9in, after watching video I bought the front Fox Coilovers from Cognito just want to make sure they will fit with no problem on my 2013 GMC SIERRA 1500??
I have a question! I have a 2015 Chevy 1500, I have a 2” rough country leveling kit on it. And I want to put Nitto mud grapplers on my stock 17” rims. The tires are 33x12.50R17 will I be able to clear and not rub, I watched a video and the guy rubbed at full lock. I think I would be good to not have to trim anything!
All manufacturer warranties apply and we will support you as the customer in ensuring you get a quality product. For any questions or concerns please email info@customoffsets.com
Love how lift kits are backwards. Ones good for off road use are expensive and will never be ran hard. People who off road a lot buy cheap and it’s not really built as strong for off road
Huh?
So true lmfao got a cheap ass 4" procomp lift and just mudded the hell out of my truck this year. Had to get a brand new transmission
Props to you guys for showing the suspension angles. Fyi Chevy forums been talkin and suspension angles are the topic. Most guys just want big tires and don't understand the cost of reliability/ safety.
And with the electronic rack on these GM trucks you wont notice your suspension is toast until its too late. Cheers to you guys!
BIG FACTS
Can’t wait to see those red crown series on the new super duty
What about the older trucks 03 Silverado
I’ve been asking around for the longest if it’s possible to get a different struts/shocks system with the Mcgaughy’s lift kits for a 1500. This video had made my dream come true!
Man thats a beautiful truck
Beautiful rig!
Clean build do you have this truck in your gallery because I want a similar setup for mine
solid truck, a spotlight video on it would of been nice
Possibly soon!🤙
So you can run the Mcgaughys lift kit with different brand struts/shocks??
So this setup would be 10k+ ?
That's where you start with the wheel/tire setup.
Did he say the setup sizes?
Nah prolly more like 5-6
how much is it to get this kit installed not including the price of the kit
I’ve got the 7-9 mcguaghys lift with 2 in spacers on all 4 wheels but my front two tires are poking out more than my rear tires. Will a 3.5 in spacer for the rear tires give it that flush look and equal out the poke?
Just gotta measure out the poke in the front compared to the rear to get them equal, so its possible that a 2" up front and a 3.5" in the rear would make them equal depending on setup
@@CustomOffsetsTV will do! Thank you so much!
I got this kit and only concern was the wheel speed sensor being tense on turns - any thoughts or tips ?
Yo custom offsets
What can you do on your truck to get better mpg? Are there certain tailpipes or something else you can do?
Depends on the truck and whats all done to it! Some people get their truck tuned for better fuel mileage and we've heard that works pretty well!
Custom Offsets
It’s a 2014 silverado 1500
And I don’t trust tunes tbh
If I had a diesel I’d delete it but tunes I’ve heard bad things about longevity
So I have a 2017 GMC sierra SLT all terrain crew can 4WD and I'm looking I to buying the cheaper mcgaughyslift kit i think its like $1791 on ur page I just wanted to run the 7" but was wondering if I need after market upper control arms and not sure if my control arms are stamped steel or almunium.
Did yall take care of the powercoat or did he outsource before he got it installed? And is is the video or does that truck look smaller them what i thought 9 inch lift would be?
We do not do powder coat here it was done locally and thats what good fitment will do!
Quick question I just bought 7to9 Mcgoughs lift kit from custom offset,set at 9in, after watching video I bought the front Fox Coilovers from Cognito just want to make sure they will fit with no problem on my 2013 GMC SIERRA 1500??
James, please send an email to info@customoffsets.com and they should be able to tell you what would work best for your kit!
James Volpe did they ever fit bc I want to know as well.
Can the ft Fox COILOVER SHOCKS be bought threw Fox or threw Cognito?
They can be bought through Fox but this specific one the customer had them ordered through Cognito!
I have a 2013 GMC SIERRA 1500, With a 7to9 in Mcgoughs lift kit set at 9in what size wheel spacers do I need to get to make the track width the same?
Typically 2" wheel spacers in the rear seem to even everything out! Check out our wheel spacers here!
customoffsets.com/spacers
Are the u bolts from the Mcgaughy’s kit used with the cognito deaver 6” leaf springs and 3” block?
I have a question! I have a 2015 Chevy 1500, I have a 2” rough country leveling kit on it. And I want to put Nitto mud grapplers on my stock 17” rims. The tires are 33x12.50R17 will I be able to clear and not rub, I watched a video and the guy rubbed at full lock. I think I would be good to not have to trim anything!
Croomrider97 go look at their website there’s a gallery where you can see if that setup fits
Get that levelling kit out of your truck ASAP! I had one in my 2014 and it broke the front diff... I now have the zone 6.5. Couldn’t be happier!
I'm looking for the same set up. Can I get total price for same set up with out powder coat and tires. Thanks
Its 2014 gmc
Send us an email at sales@customoffsets.com and they can find the setup that works best for you.
Wat size wheel and tires is this
How much does this “mixed kits” cost total? With the Mcgaughy’s upper control arms and traction bar.
Can you upgrade to Fox shocks with any McGaughys kit?
With some of them you should be able to! Send an email to info@customoffsets.com and they can see what they can find out for you!
Thegarciaslife did you ever figure out if you could
What deaver leaf pack can i use to replace the stock leafs with the mcgaughys kit set at 9? Looking for level fit
Send an email to info@customoffsets.com and they should be able to help you figure out what would work best!
Ethan Wood did you ever figure out the leaf spring
Is this lift kit compatible with vehicles with Magneride?
What is the tire set up here? 37x13.5R22? or Just guessing here btw! lol
Check out this wheel and tire setup here!
bit.ly/2WY31TN
Man I have a question I need answered but the chances of you responding are slim
What brand wheelbearing are a good option?
Timken. Avoid the economy units like the plague.
Check out our Kryptonite wheel bearing hub assemblies!
bit.ly/2Qew0A8
Why didn't the customer go with the same name brand for the lift kit? Doesn't the customer have confidence in McGaughy's lift kit or shocks ?
Fox is just a high end shock with reservoirs.
How does it cost for the a set up like that with both kits
look here! bit.ly/2y48roH
So wats the wheel and tire size?
Id say 24x14 and 35s
I'm gonna say 37 13.50 on 24x14
I think I saw a '375' number on the tire
24x14’s with 375/40/24 Nitto Trail Grapplers
Check out this wheel and tire setup here!
bit.ly/2WY31TN
Just curious what mpg does he get or can he even tow with this now with a 1500? lol
Mines gets about 13/14 mpg
What wheels are those?
Those are chrome Arkon Victory's with custom painted rings and emblems! Check out the Arkon Victory here!
bit.ly/30itwW9
If you order a lift kit from custom offsets do you still get any warranty’s involved??
All manufacturer warranties apply and we will support you as the customer in ensuring you get a quality product. For any questions or concerns please email info@customoffsets.com
How much would this exact kit cost??
Check out this lift kit on our website here!
bit.ly/2QeK5xm
Wicked ass Truck 🤙
Very nice selection of parts in build that thing needs to go off road
That mud is rough on bearings and other parts
Drive the truck on the street and if you want to go muddy, get you a side-by-side
I was always told single lift block is fine, double lift blocks is a no no!?!?
Very nice. Did not mention the price of the set up.
Check out this kit here!
bit.ly/2QeK5xm
You guys should do a drop kit or flip kit install on a 14-18 sierra
If we get the oppurtunity to we will!
💯
That mustache
Straight from the 80's lmao.
Ceasar jackson 😂exactly
RIP steering radius 🙈
I think im going to put this in the front of my 2016 gmc sierra with 2in drop shackels in the back😅
$2250 without traction bar
Check out this kit here!
bit.ly/2QeK5xm
PERFECT 🤤🤤😍
Nice truck but way too much offset. 20×10's with 37/12.50's would look cool!
Hot
80,000 truck, 8,000 lift kit, 90,0000 in Total. I’m good with my 3,500$ truck
Indecisiveblake i want whatever you’re smoking because that’s nowhere near an $80,000 truck😂
50k max, if he paid more than that for a gasser slt then he over paid. Probably 10k lift tires and install. Looks good
Jose Castelan love the color match but the price of the lift and powder coating along with wheels is easily 8,000$
$80,000!? 🤣🤣🤣 yeah stay with your $3,500 truck.
The Denali optioned out is 64k....no way this truck is 80k lol
those tires will never see mud :/
$$$$$$$$$$