Lian Li Dan Cases A3 is FINALLY Here! Worth The Wait? | Micro ATX Gaming PC Build

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 505

  • @Mr_Matt_Lee
    @Mr_Matt_Lee  7 місяців тому +150

    To answer the question “Will the Arctic Freezer III 360 fit in this case?”…. 💀

    • @martinmonsterbale1305
      @martinmonsterbale1305 7 місяців тому +12

      Crazy how much fits but also how small they’ve made that case

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +29

      @@martinmonsterbale1305absolutely agreed. It’s not a tall case by any means, but the length and GPU support etc is awesome. To be fair, with slim fans fitted to the thick radiator the Freezer III would’ve fit. The cooling wouldn’t have been quite as wholesome though

    • @blatant6500
      @blatant6500 7 місяців тому +2

      tbh, i do think it would fit. Maybe if the motherboard has an less taller io shield?

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +7

      @@blatant6500 it wouldn’t, honestly. The IO shield was the smallest of any motherboard I own and it still wouldn’t clear by quite a long shot. Perhaps you had a motherboard which has a removable IO plate there could be a slim chance… or just fit slim fans to the Freezer III instead 🫡

    • @RATTU5_
      @RATTU5_ 7 місяців тому +2

      @@Mr_Matt_Lee maybe slim fans would have cleared it? Some of those 15-20mm thin ones 🤔

  • @Tutku35
    @Tutku35 7 місяців тому +158

    exactly what we need more of! budget-friendly, small mATX cases like this!!!!!

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +12

      Yessss! You so know it ✌️

    • @beneglo4773
      @beneglo4773 7 місяців тому +6

      And psu's 😂

    • @Surfer42
      @Surfer42 5 місяців тому +1

      I think the expensive part is still the mobo!

    • @orangecat1596
      @orangecat1596 5 місяців тому +1

      @@Surfer42yeah I regret buying my ITX mobo for $450 just to house a 13600kf in a A4H20 lmaoo but it’s a overspecced MB at least

    • @Surfer42
      @Surfer42 4 місяці тому

      @@orangecat1596 we Need cheaper mitx

  • @Stepher45
    @Stepher45 7 місяців тому +87

    My favorite part of your videos is the airflow visualization. It’s so useful to see. Awesome work.

    • @sheshd
      @sheshd 7 місяців тому +2

      Always answers the question when you see that phat ass GPU installed

  • @daviddamasceno6063
    @daviddamasceno6063 7 місяців тому +37

    Buying parts that end up not fitting is genuinely one of my biggest fears, lol. Another amazing build. I like this trend of small, compact PCs.

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +12

      It’s a good thing that I I did it so you didn’t have to 😅💀 I agree though!

    • @AgentKenshin
      @AgentKenshin 7 місяців тому +6

      PC part picker can really help you with some of this. They generally do the research to make sure components like coolers and other things fit inside cases. It is a good place to start, you can configure a system in a case and see if anything throws a conflict error.

    • @hoofhearted4
      @hoofhearted4 5 місяців тому +1

      @@AgentKenshin PC Part Picker wouldnt have caught this though (i know, because i have it in my build list right now). but its not big deal buying parts that dont fit. you just RMA them and get something else. Hopefully your existing PC still works though haha. because then yea, it does suck.

  • @Huonman06
    @Huonman06 7 місяців тому +59

    Yes more matx!!! These builds look so good

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +17

      I’m literally obsessed with mATX at this point and feel my channel is becoming solely about them 😅✌️

    • @justanobody4983
      @justanobody4983 5 місяців тому

      @@Mr_Matt_Lee matx is the way brother! Especially if you dont need the additional features of a full atx and itx mobos are expensive.

  • @Audience003
    @Audience003 7 місяців тому +38

    That Inception level transition 😍😍

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +14

      Heck yes! It took 3 hours for somebody to drop a comment referencing the intro transition, but here you are and I’m stoked! 😄👏

    • @zero131056
      @zero131056 7 місяців тому +1

      brilliantly done Matt

  • @stufflike5844
    @stufflike5844 7 місяців тому +25

    This guys editing is next level, no other tech youtuber can compare

  • @Trasselkalle
    @Trasselkalle 7 місяців тому +4

    Ooo - the box robot below the TV makes me happy. Finally someone else that appreciates how expressive it is!

  • @michaelnikolovski7151
    @michaelnikolovski7151 7 місяців тому +7

    Much love From Australia Matt. Bringing a minimalist cinematic to the video is so good - Love your videos mate

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +3

      Thank you 😄 Much love back at you from the UK my friend!

  • @drunkedhusky24
    @drunkedhusky24 7 місяців тому +5

    Im glad they finally released this one, ive been waiting for this to change my big case with this one so i could take my pc easier to other places

  • @TheMathi78
    @TheMathi78 7 місяців тому +10

    Hi Matt... You're excelling more and more with your videos every time. Really strong. 👍👍
    I'm full of excitement and joy every time you post a new video. Love it 💯❤🙏

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +3

      This is the most wholesome comment 🫶 Thanks buddy!

    • @CoffeeGameMovie
      @CoffeeGameMovie 6 місяців тому

      I really like this barber shop like dark/coffee theme. Cheers!

  • @RXR25
    @RXR25 7 місяців тому +4

    Damn thats a sick case, great video on this one. I love how you go over the cooling configurations in a clear and concise matter.

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому

      Thank you. I’m glad you enjoy those sections of the videos as they take quite a lot of time to film and annotate 👌

  • @martijnvenhuizen2155
    @martijnvenhuizen2155 Місяць тому

    An awesome showcase of this case. Just ordered it for my father in law. Great video

  • @Oztorek
    @Oztorek Місяць тому

    5 months late, but damn. You're doing something crisp and different here. Got me pumped at the end!

  • @WeezkaD
    @WeezkaD 7 місяців тому +1

    Best PC build channel on UA-cam.

  • @gabrielguzmann1ufo905
    @gabrielguzmann1ufo905 2 місяці тому

    Awesome Build! Thanks to you I have been motivated to build with this case! I really appreciate all of your builds. Thank You for your great content.

  • @Jibberish18
    @Jibberish18 6 місяців тому

    Just want to say that the production value in your videos are through the roof. Great job.

  • @mrsuuunset606
    @mrsuuunset606 4 місяці тому

    the quality of this video was superb loved all the transitions great video

  • @ARUNMANOJ86
    @ARUNMANOJ86 7 місяців тому +1

    such a neat build and airflow path chosen by Lian li for this very clever and very practical.. no nonsense RGBs in sight.

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +1

      Yessir! 👌 The design has been really well defined that’s for sure.

  • @zoltrix7779
    @zoltrix7779 2 місяці тому

    Last PC I put together was like 15 years ago, I cannot seriously believe how fans are in these modern, albeit super neat builds.

  • @leeroy_jenkins4451
    @leeroy_jenkins4451 5 місяців тому

    This guy video is so smooth can have a nice cup of coffee and watch him

  • @lastsonofthewest2444
    @lastsonofthewest2444 7 місяців тому

    Absolutely spot on choice of components, and a very nice build. Going to buy one (even though not needed!) based entirely upon your video.

  • @aeronybrek4696
    @aeronybrek4696 7 місяців тому +1

    Ah the weekly dose of chill pc building vids… thanks bro!

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому

      It’s a touch later than the usual upload but hopefully worth the wait 🤞

  • @iogarchi
    @iogarchi 7 місяців тому

    Hey, I just started to watch your video and I couldn't wait to express this: How amazing was that introduction of your vide, I really loved it. Really original. Thank you for your amazing content.

  • @rudyu11
    @rudyu11 3 місяці тому

    I Love Small Cases it makes the desk clean and good to look at. ❤

  • @mcrazza
    @mcrazza 7 місяців тому +4

    Yes, mATX in SFF!!!
    Liking the stealth build with a sprinkle of RGB. 👍 👍

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +3

      Yessss! My ideal setup too, accent RGB without overpowering 🤌

  • @TheSakuraBirb
    @TheSakuraBirb 6 місяців тому

    I just came across your channel as this was the first video on this case. Your production is insane!! I was able to fully understand this case, and loved the airflow section. Music on point as well.
    Only thing I'm still left curious about is if phanteks t30 fans would fit in this beauty.

  • @cgworks0822
    @cgworks0822 7 місяців тому

    watching this with sipping black coffee at rainy night is so damn perfect!

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому

      This comment is so wholesomely wholesome ☕️

  • @TheGloriousLord
    @TheGloriousLord 6 місяців тому

    Matt you could add 1 smaller fan below the PSU there, to maximize air flow

  • @NINJA_INVESTORS
    @NINJA_INVESTORS 5 місяців тому

    This dude has serious editing skills. Subscribed!!!

  • @Helghast73
    @Helghast73 7 місяців тому +1

    Be a case worth looking at to do a build for a younger brother.
    Great stuff as always 👊

  • @Alex-cg2sd
    @Alex-cg2sd 20 днів тому +1

    Why did you swap the argb fan on the radiator? Was it because they are better fans or for asthetics? Pls answer since I am doing a nearly identical build.😅

  • @INTEL_CORE_INSIDE
    @INTEL_CORE_INSIDE 5 місяців тому

    Best videos on UA-cam.
    Love your style.

  • @jonathonkindle4806
    @jonathonkindle4806 7 місяців тому

    Incredible video quality and editing EVERY time. Imagine being pulled in by a case video, lol.

  • @teiji_ishida
    @teiji_ishida 7 місяців тому

    Really cool video. I love the airflow visualization part. I don't see anyone else doing that.

  • @JohnmillerPowerlifting
    @JohnmillerPowerlifting 7 місяців тому

    lian-li the goat of case builders

  • @viktor821
    @viktor821 6 місяців тому

    The airflow segment of your videos ❤

  • @thanhsonnguyen4426
    @thanhsonnguyen4426 2 місяці тому

    Danm. I enjoyed your vid. Not just the case. Great work

  • @RoyalTeaLegion
    @RoyalTeaLegion 6 місяців тому

    Woooooooooooo! This looks amazing! Pro movie cinematic quality

  • @blackfox-musa06
    @blackfox-musa06 7 місяців тому +2

    The case is small, but what's inside is a beast.

  • @KiriCattus
    @KiriCattus 7 місяців тому

    This dudes playlist just HITS! I need the music from all the videos in a playlist x'D Keep up the great quality work! >:D

    • @ablindcavesalamander
      @ablindcavesalamander 5 місяців тому

      The song at the end is Nightcap - Fire (Instrumental Version). It's on Epidemic Sound, a service that licenses music for creators, and I would guess the other songs also from there.

  • @RYZEN7thGaming
    @RYZEN7thGaming 7 місяців тому +2

    Another superb video mate 💯🔥👌🏻 Keep it up!

  • @iBeaver1973
    @iBeaver1973 7 місяців тому

    I was exactly looking forward to seeing the arctic cooler freezer III (240) fit in this optimized for liquid cooling case... or any miniitx case ... so, with the cooler master n200p (similar as this case) I installed my freezer III on the bottom, installed glass side panel, and now lay it on its side (glass down) so intake on the right.... radiator is blowing out left.

  • @saltydog1505
    @saltydog1505 2 місяці тому

    i love it... reminds me of an xart where the couple is watching another xart.

  • @Markozzy
    @Markozzy 7 місяців тому +1

    I like the look of small pc build simplistic and effective great case

  • @pdureska7814
    @pdureska7814 7 місяців тому

    Seems like it would be a great case for air cooling. Plenty of air flow with all the panel perforations. And yeah i am a sucker for a tempered glass side panel which i think would be great as an ala carte addition if one so desires. Gotta see a little bling inside especially if its a MATX case ( and not a tiny airflow restricted SFF case).

  • @enzone.g8673
    @enzone.g8673 5 місяців тому

    So cool review! I love you Matt!

  • @chrisdee
    @chrisdee 6 місяців тому

    Love it. I have the C4 SFX and love it so much. Its the best case in my Opinion!

  • @sentiel
    @sentiel 7 місяців тому

    Question Matt: A lot of people in this kind of dimension with 3 bottom/front inflow are opting to make the rear an inflow not exhaust for positive air pressure... what was your thought in keeping the rear as exhaust...?
    Also now please do a temp comparison VS the current GOAT of mATX cases.... Ofc I'm talking about the AP201

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +1

      MATX build off of two champs! Sounds fun 😎 I personally like to the keep the exhaust in a config like that as an exhaust. It helps remove the GPU heat before entering the radiator. The far side of the radiator still collects cool air from the other bottom intake fans just fine. I don’t think the temp differences are enough to question it either way 🫡

  • @justeddm
    @justeddm 7 місяців тому

    Finally it's here, thanks matt .. great build.
    Please make air cooled build too.

  • @1nsector
    @1nsector 10 днів тому

    I have a question for the author. Why can't the power supply be positioned with the larger fan facing the outer wall, so it draws air from outside instead of hot air from inside the case? As I understand, the external front wall of the case has openings for air intake from the outside. Or there is no holes in front panel?

  • @tyrion911
    @tyrion911 7 місяців тому

    Great vid as always ❤. So the case is a smaller AP201 with better fan support and looks more aesthetically better. Looks like I found the perfect case for the next build.

  • @mr_hancy4101
    @mr_hancy4101 7 місяців тому +1

    Finally!! Its been so long!! (Its been 3 days extra)

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +1

      Man, the wait killed me too! 🫣

  • @yanni-duff
    @yanni-duff 7 місяців тому

    Isn't it a lot better to bring in cool air through the radiator (intake through the top and exhaust through the back and bottom? That way GPU hot air won't pass through the radiator and instead immediately exhausted out.

  • @natashashark85
    @natashashark85 13 днів тому

    air flow dynamic of this case is better with 2 fans on the bottom and thats it. Thermals skyrocketed when i installed the two on the side.

  • @Michael-pf1in
    @Michael-pf1in 7 місяців тому

    Money and time spent to sit in a chair and watch a screen. Life is crazy. Dope video as always.

  • @HouseLightweight
    @HouseLightweight 6 місяців тому

    I'm more curious if something like the Noctua Chromax or the Deepcool Assassin IV would fit in this case. Def an amazing build though.

  • @CX3Productions
    @CX3Productions 7 місяців тому

    Cool intro and nice build. All that was missing was you pointing at yourself when you saw yourself on screen 😎

  • @avirtualworld4U
    @avirtualworld4U 3 місяці тому

    Just ordered mine today with the wood front kinda excited to build it, Have to wait for the new Ultra core in Oct thats whats going to live in this one. Parts & Pieces till then. Remembering my 7 P's=
    Proper Prior Planning Prevents Piss Poor Performance. It was 10 yards to the outhouse by Doya Think He'll Make it Co Starring Betty Wont.

  • @AlexandrMaystrenko
    @AlexandrMaystrenko 6 місяців тому

    Вы сделали большой рывок в качестве съемки! Мои поздравления! Раньше смотрел с удовольствием, сейчас просто ЖДУ НОВЫХ ВИДЕО! Это такой экстаз для перфекциониста.
    p.s. Корпус крутой но останусь верен своему ap201 🥷

  • @Fheral360
    @Fheral360 7 місяців тому

    The video was superb quality, top-notch no doubt! and I REALLY LOVED the case but I have a burning question, what is the song or the artist you used? I feel like that was a really nice cherry on the cake

  • @kimyoungbum7890
    @kimyoungbum7890 7 місяців тому

    Love the m-atx content mate, keep it up!

  • @NGreedia
    @NGreedia 4 місяці тому

    Very nice looking case. I still like my AP201 as well, but the mesh side panel on this one seems like it's less restrictive? easier to see inside too

  • @Rglass-xu5zq
    @Rglass-xu5zq 5 місяців тому

    the part with the smoke and beat you get a like and sub for that nice done

  • @nihren2406
    @nihren2406 7 місяців тому

    Man I wish this was available when I built my current rig last year. I thought having the biggest case and more upgrade options would be fantastic, but it's such a hassle to do anything with because it's so massive. A small form factor is what I'll probably do next and this case looks great, though I am concerned about GPU clearance so I'll have to double check on that when the time comes if I go with this case. I currently use a 4-slot 4090 and it definitely doesn't seem like it'd fit here.

  • @misterbear9211
    @misterbear9211 7 місяців тому

    I'm impressed you can have a 3 slot card and still fit some fans underneath it.
    I just might reconfigure my nr200 into this one.

  • @bryanAsousa
    @bryanAsousa 7 місяців тому +1

    Nice, having a hard time choosing between this the nr200p v2 or wait for the LianLi c4 v2. 😅

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +1

      Mannnn so many strong choices and only one PC build to make 💀 I’d say all of them because… yes?

  • @MrSouthSioux
    @MrSouthSioux 7 місяців тому +2

    Shhhhhh Matt. The dirty little secret is MATX is the sweet spot and since it isn't the most popular form factor you can save some bread by going with it over ATX or ITX. Soon as the manufacturers catch on they will raise the prices to match the trend. Let's keep it hush hush shall we?

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +3

      The secrets stays here 🤫

  • @jboy1757
    @jboy1757 6 місяців тому

    is it possible to add a 280 AIO on the side of the MOB with a SFX PSU? Would love to see that build

  • @randalllawkin
    @randalllawkin 5 місяців тому

    🎉 different approach to making videos i like it

  • @Custom_PC_Keebs
    @Custom_PC_Keebs 7 місяців тому

    Such a clean build (as always) ! Arctic freezer 360 definitely have clearance issues in some cases (even bigger ones). But it performs great so they say.

  • @almosgugi6676
    @almosgugi6676 7 місяців тому +2

    HAHHAA... THE MYTH, THE LEGEND, he is back boys😂❤ ( 3 days )

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +1

      I climbed out of my coffee hole this morning with my chin held high 😂☕️

  • @melsandi1737
    @melsandi1737 7 місяців тому

    its really relaxing watching this build wow

  • @BrainLeisure
    @BrainLeisure 7 місяців тому

    Damn it's beautiful. I kinda wish the stripes on the front were made of wood, would look awesome. Great video, thank U

  • @imglidinhere
    @imglidinhere 7 місяців тому

    During the final showcase and panning shots, what is the music you're using? It's amazing.

  • @smartiejunky
    @smartiejunky 7 місяців тому

    Man! Love watching your videos!
    Love the case and the simple design. Also the Arctic P12 Max are awesome. I've a build with the Asus Prime AP201 and it is just super quiet and cool. 😎

  • @CousinRoysCorner
    @CousinRoysCorner 7 місяців тому

    I wonder if the temps are good with 3 intake and 4 exhaust fans. Might be sucking out the cool air faster than its circulating inside.

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому

      Temps are in the description. Nothing to complain about at all ✌️

  • @cze7470
    @cze7470 7 місяців тому

    Having a Jonsplus i100 Pro right now thia Case is Interesting!
    Can we do a dual 360mm Radiator Setup when modding the Bottom?

  • @j.p.h.8126
    @j.p.h.8126 7 місяців тому +1

    Nice build as always but the case it self is kinda like Asus AP201 or Jonsbo D31. 🙂

  • @ArrowFunction
    @ArrowFunction 7 місяців тому

    Great video, Love the TV section at the start!

  • @ToastenButter
    @ToastenButter 7 місяців тому

    Glad to see the GPU has a whole 1.6789mm clearance before rubbing against the intake fans.

  • @akaPointlessYT
    @akaPointlessYT 6 місяців тому

    at 0:55 I thought the phone on the coffee table was displaying a picture of an egg being cooked in a black fry pan LMAO

  • @semulicka
    @semulicka 7 місяців тому

    the beautiful airflow tho .. i also using the P12 Max for my build imo it is the best fan you can get for a pc

  • @owentse6949
    @owentse6949 6 місяців тому

    I'd make the rear fan as an intake to have positive airflow. Would that be a good idea?

  • @sarunyoupanyim4782
    @sarunyoupanyim4782 5 місяців тому

    i love your story and presentation.

  • @mihaibitza5021
    @mihaibitza5021 7 місяців тому

    Ha, ha! I guessed that the video with Lian Li A3 is coming.
    I deserve to be rewarded. 😮

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому

      Rewarded huh? 🤔 what kind of reward would you like?!

    • @mihaibitza5021
      @mihaibitza5021 7 місяців тому +2

      Honestly, I'd like the black version. 😂

    • @louiienation8497
      @louiienation8497 4 місяці тому

      @@mihaibitza5021I hope you got it!! I just ordered the white version A3 Lian Li case as I’m building a budget itx pc for my wife to use for work and school !!

  • @dirk_dirk_goose
    @dirk_dirk_goose 7 місяців тому

    Thanks for the amazing video! I have been looking for a very nice SFF case my old case is to big! Looks wonderful for what I want so I can finally put a case on my desk!

  • @Garde538
    @Garde538 7 місяців тому +1

    Sick tunes ❤

  • @kittipat33t
    @kittipat33t 7 місяців тому +1

    your videos alway make me want to build everytime... but when I actually building a PC... I feel too tired everytime 🤣🤣🤣... Thank you again your vid complete my day 👍👍👍
    EDITED - watched the end... you are not a good dancer LOL

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +1

      Oh man, stoked to inspire you! Make sure you’re resting enough and one day soon you’ll have the energy to build yourself a new dream rig 🦾

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому +1

      Ps, I never claimed to be a good dancer 😂😂😂

    • @kittipat33t
      @kittipat33t 7 місяців тому

      @@Mr_Matt_Lee well, u r an amazing builder & creator tho! 🤩

  • @nitishtiwari8772
    @nitishtiwari8772 7 місяців тому

    Hey Matt, I love your clean and minimalistic builds and this one is no exception. However, I noticed that this build has a -ve airflow (more air out than in) which will result in more than usual dust build up over time. This is why a +ve airflow is the ideal way to counter this issue which also allows more cool air coming inside for better cooling. Also, since there are no intake fans in the front and the bottom fans have been covered by the the gpu, there is no direct cool airflow coming towards the motherboard which I think is not ideal. Wouldn't it be better if the rear exhaust fan is flipped to act as an intake fan which will result in a +ve airflow in the case and better cooling ? Or am I missing something ?

  • @lions4528
    @lions4528 6 місяців тому

    Wondering... a MSI 4090 Suprim Liquid X and a Noctua low profile L9 on a 13th Gen i7 is even viable in this case.

  • @felipeprenholato2301
    @felipeprenholato2301 7 місяців тому

    Looks good :). Love the front input at bottom.
    In other line of cases, I would love to see something similar to NCORE 100 for MATX boards with really good ventilation :).

    • @Mr_Matt_Lee
      @Mr_Matt_Lee  7 місяців тому

      Yeah for sure! I love the front bottom IO ports. It’s where they should always be by default 😅

    • @felipeprenholato2301
      @felipeprenholato2301 7 місяців тому

      @@Mr_Matt_Lee I think that companies must made then modular enought to move around the borders. My PC is in the wall, IO ports on top wouldn't work haha. But for people that use under the table is usefull.

  • @alessandrobaggi
    @alessandrobaggi 7 місяців тому

    Amazing as always Matt!! Surprised by P12 MAX. How is their noise and how do you compare them with A12X25?

  • @SaintVes
    @SaintVes 7 місяців тому

    The powerblock takes air from... inside? Did I got it right? Strange decision... Impossible to flip?

  • @TEBATONAKARA
    @TEBATONAKARA 7 місяців тому

    This is the perfect case that i need!!! just change my motherboard!!! s2

  • @Spitsinbums
    @Spitsinbums 2 місяці тому

    wild intro!

  • @leondelicato4638
    @leondelicato4638 21 день тому

    Just one critique point… the psu could be positioned lower so the tubes of the aio would bend less.
    Otherwise amazing built ❤

  • @TechGaming809
    @TechGaming809 6 місяців тому

    I like this one a lot,clean build

  • @clouddweller91
    @clouddweller91 6 місяців тому

    All your videos makes me want to drink a cup of coffee

  • @XHeavygunX
    @XHeavygunX 7 місяців тому

    I have mine ordered. I’m wanting to test and see how portable this case can be.