Hey, is that construction by itself durable to a very hot weather, environment? Like, can it bomb or something due to significant heat, or will just stop work?
se que no me entiende nada pero lo digo , tremendo circuito pocos materiales y fácil de hacer . por cierto esta quemando evidencias de videos pasados nunca lo sabremos XD hahah
i have been gathering these transformers from every scrap tv monitor display i can find. ive followed this video as well as many like it. i have only been able to get an electric arch from 3 out of almost 30 different coils/attempts. all the transformers look like they probably have like 50k-100k secondary turns. i have also tried winding my own primary with 5-15 turns in every possible direction (both clockwise, both counter clockwise and in opposite directions from each other. how does the windings directions affect the outcome? i thought the right hand rule would imply there was a correct and incorrect way. of my three that are working one primary pair goes opposite directions around and the other two are wrapped around the same direction (i mean direction as in whats represented in diagrams by a dot mark on one end of each coil in a transformer's symbol) ive kept the spark gap about 2-3 mm. the 3 that have worked have been able to jump a lot more than 3 mm. why arent most of these working properly? is there any way to measure the output without risking destoying my multimeter? will voltage go back down if i connect the output to another of the same transformer just in reverse? i thought thats what i had learned about a long time ago but now im unsure whats going on with it. what is supposed to happen if the output is connected to another high voltage transformer's primary winding? shouldnt it produce much higher voltage on the second secondary?
@@homemade_101 in my first comment i meant to imply that i will not use my multimeter to measure the secondary output directly. one of my questions is... in what way can i measure the output voltage? voltage divider??? something like 10k:1? if i place 100k ohm and 10 ohm in series across the output and then use brothers multimeter to measure ac voltage drop across the 10 ohm? that should work, yes?
50A voltage controller 👉ua-cam.com/video/j3E9Hj31ZHg/v-deo.html
Good circuit, very simple 👍😎
welcome bro
Hey, is that construction by itself durable to a very hot weather, environment? Like, can it bomb or something due to significant heat, or will just stop work?
yes some time
ماهو فاءدة الترنزستور هل يقوم بتضخيم الفولتية
oscillate frequency
Hi can you help me with the specifications of the transformer like the input and output
It is I don't know
Super idea😍😍😍
Welcome ☺️
Hi sir What electronic devices do I usually get an IRZ44 MOSFET from? I want to use used items at my house for DIY.
UPS, Inverter
Inside Fan dimmer also
look for it in car sound amplifiers
many simple npn transistors will work aswell
Best use for cigerate lighter?
yes
is that 1/4 watt resister? Looks like it. 5% tolerance?
yes
Mosfet which to use? Can we use any mosfet?❤
Irfz44, IRF3205 any N channel OK
se que no me entiende nada pero lo digo , tremendo circuito pocos materiales y fácil de hacer . por cierto esta quemando evidencias de videos pasados nunca lo sabremos XD hahah
Sir ispe capasitor lagaye to kaha pe lagana hoga plz rpy ??
between output pins
Thanks for sharing
Welcome
Tfftf5t5
@@homemade_101
@@homemade_101
td rtt tdy
How much voltage is on transformer?
it is depend
@@homemade_101 I mean which you used
@@History_Military. you ever figure it out?
i have been gathering these transformers from every scrap tv monitor display i can find. ive followed this video as well as many like it.
i have only been able to get an electric arch from 3 out of almost 30 different coils/attempts.
all the transformers look like they probably have like 50k-100k secondary turns. i have also tried winding my own primary with 5-15 turns in every possible direction (both clockwise, both counter clockwise and in opposite directions from each other.
how does the windings directions affect the outcome?
i thought the right hand rule would imply there was a correct and incorrect way.
of my three that are working one primary pair goes opposite directions around and the other two are wrapped around the same direction (i mean direction as in whats represented in diagrams by a dot mark on one end of each coil in a transformer's symbol)
ive kept the spark gap about 2-3 mm. the 3 that have worked have been able to jump a lot more than 3 mm.
why arent most of these working properly?
is there any way to measure the output without risking destoying my multimeter?
will voltage go back down if i connect the output to another of the same transformer just in reverse? i thought thats what i had learned about a long time ago but now im unsure whats going on with it.
what is supposed to happen if the output is connected to another high voltage transformer's primary winding? shouldnt it produce much higher voltage on the second secondary?
yes, you are right. but don't measure of multimer.
@@homemade_101 in my first comment i meant to imply that i will not use my multimeter to measure the secondary output directly.
one of my questions is...
in what way can i measure the output voltage?
voltage divider???
something like 10k:1?
if i place 100k ohm and 10 ohm in series across the output and then use brothers multimeter to measure ac voltage drop across the 10 ohm?
that should work, yes?
@@instructoruldemeditatie2367i believe the main problem i was experiencing had to do with the particular bjt and fets i was using
Is that monitor fron a tv?
yes, TV monitor. LCD or LED. The computer monitor is ok.
@@homemade_101 thank you
👉👏👏👏👊👊💥👍👍👈
🥰
☺️
Transformers where to get
Old LCD TV mother board
From shop 😅
Diagrams please
This is simple bro..
Saya mencari konten yang membuat kompor plasma dan sampai sekarang belum ada
Can i shock you when you touch the arc ?
some time