Great point about build quality - with any unusual/unique/innovative design, the build quality determines whether it's going to end up as a short-lived gimmick or something that will be in everyone's toolbox in 20 years. Nice review. I might have to pick up a set.
I love this tool. But I disagree with what you said about the jaw size making them more likely to round off fasteners. One of the coolest things about this tool is the way that any torque applied to the rear handle is transferred into additional clamping force at the jaws. I think the thinness of the jaws might make them more likely to mar the fastener when lots of force is applied, but they they won't round the corners off like a typical wrench would. The harder you push on the handles, the harder the jaws clamp onto the flats of the fastener rather than digging into the corners. I imagine a regular wrench might widen a little bit under extreme force, but this tool does the opposite.
The first time I saw these (20 years ago iirc) I thought it was just an unnecessary gimmick but I have come to realize many practical uses and they are now on my wish list.
@@johnjingleheimersmith9259 Agreed, when I grabbed mine the rep had a look of horror wash over him when I asked how well it handled grease n oil for automotive work.....meh, I bought it, Ill mess it up as I see fit :S :P :D
@@user-lz1zj4gq6v I'm quite pleased. They work very well, generally making my amateur ass look semi pro :D Ive found that I really like/find satisfying that squeezing it harder seems to make it work better.... probably placebo, tho I could fabricobble some legit sounding maybe reason for it, I dont care: It feels unreasonably satisfying :D I should note that I dont beat on it tho.... If it cant get it, I go get a proper socket and a breaker bar (or my Knipex Cobra water pump pliers...they seem to thrive on punishment; I havent found a supper too hot for em yet ;) ) Cheers
These are so freaking awesome they really caught my eye I’ve never been a fan of Channel lock pliers they’re unpleasant to my eye but these Pliers wrenches are really awesome
I bought the little ones, 6 inch. Remarkable tool. I have not fumbled with an adjustable wrench since. Their little Cobra pliers are really good too. Knipix makes some killer stuff- the steel is top notch. The design is cutting edge kinda tool stuff.
I just got these about a month ago and they are awesome, I work in industrial maintenance and they work so much better than adjustable wrenches. Though if your working in a very tight spot it a little annoying but iam sure the more I use them that will become easier.
I like them a lot as well although they're narrow Jaws give better access, however, sometimes you need the wide surface area of a traditional adjustable wrench
I bought the 5 pc set. Soon I regretted it, feeling they weren't as useful as I had hoped. After 2 years of owning them I now feel they are a great value. They do well for wrenching as long as you have good access, but they really shine for being smooth jaw pliers that won't mar up the work piece.
I use them every day. There impossible to slip on a nut. You don't necessarily need to squeeze them. If you keep pressure on the leverage handle it's impossible to slip. You will never be able to break them with your hands. Trust me. Idiots at work have used them out of there norm limits and never even phase them. One of my favorite tools of all. Perfect for bending sheet metal also. Just bought the 400mm version today. Take care
They are indeed very strong and I do like how they function but I have seen a broken pair it was actually just a couple weeks ago although the person was putting a lot of twisting force on them almost like they were intentionally trying to break them don't ask me why
Nice review Catus! The way they pronounce Knipex in Germany is K-nee-pex. Hard K sound, then nee (sounds like knee), and the pex. Seems like nobody outside Germany pronounces it right, it's a tricky one.
these are cool, i have both these sizes. I use them for doing alignments on cars, because no matter what the size of the tie rod or jam nut these two wrenches cover anything you will encounter. Using them since summer 2009, and they are still awesomre. These really are built to last. good stuff
These don't round fasteners and you get great leverage with these. I use the 7" pliers wrench every day. They ratchet around the fastener and you never have to re-adjust the opening like traditional adjustable wrenches. I use them in many of my videos. I am not gentle either with my tools.
Thank you for your comment knipex tools seem to be pretty nice and very high-quality. I'm a little more hesitant in recommending now after hearing and reading about difficulties getting warranty replacements. That being said there's a local tool repair shop here that also sells knipex tools and I asked them and they said if an knipex tool breaks that they will personally deal with replacing it. So I would always ask the retailer where you're buying them about that
@@CatusMaximus For the record, a couple of years ago I had to replace a pair of the 10" version that disappeared... got the replacements off Amazon. The replacements were tight to adjust, but I thought they'd work in, but no, and by that time it was too late for an Amazon return. I searched the Knipex website and found the warranty info... and wrote them. Heard back within minutes; they wanted a receipt, gave me an address (in the US midwest) and off they went. They sent the replacements out right away. However, I have a distinct feeling that without a receipt, it would have been a different story... as always YMMV.
One thing you didn't mention is that they sort of have a "ratcheting" feature due to the play at each locked position. This allows you to keep the plier on the fastener, release your grip, and rotate in the opposite direction freely without disengaging the pliers fully from the fastener.
Yes I should have mentioned that although only on the smaller Fasteners on the larger Fasteners the Jaws do not open wide enough for that ratcheting action
No matter the wider jaws of a cresent wrench, Knipex won't damage a bolt, as a cresent wrench sometimes does. Why, because of the paralel 10times more powerfull grip, that any cresent wrench doesn't have. Cresent wrenches rely on a screw, that is loose no matter how much you have tighten it. Knipex however, work like pliers plus the 10 time more force applyed on the parallel jaws,never damages bolts, like cresent wrenches do!
I had a ridiculously tight Nut which was starting to round on a thread with was bent. My 250 version managed to undo it and bend the Nut back into shape. Managed to bend the thread back straight as I was tightening it
@@pooki3slinger832 it's difficult to argue in terms of Cobras and Pliers Wrenches. There may be some better for some applications, but the Knipex ones of these are amazing. They may not be worth it for everything, but I am very glad I got the ones I did.
It's worth noting that an adjustable or fixed wrench cannot grab a fastener the way these do and at the same time be able to release it. An adjustable wrench or fixed wrench always has to have a tolerance to be able to slide onto a nut or bolt head, or a straight surface, so this really has less ability to round something. I've never seen an adjustable wrench with less than a MM of play, as far as I know, and often they are not exactly straight. My experience with Crescent wrench is his that they have the particularly annoying future turning inwards at the top, which forces them to have even more tolerance going over a bolt or flat surface. Thus, I think they are genuinely better than other tools for a lot of applications.
I can understand about crescent wrenches and your comments about there Precision my experience with newer ones has been the same however I did a review some industrial finish with orange handle American-made ones and those jaws are absolutely parallel and are very tight tolerances they do not wobble around and hold very nicely. I do like these knipex pliers the one issue I have is the Jaws or a bit narrow and I've had issues with them denting in some Fasteners where crescent wrenches have nice wide Jaws and in some situations you really need that additional surface area especially if you're using a crescent wrench to Bend pieces of metal or do other tasks
I use these daily and Knipex lineup is second to none. Using a channel lock or a crescent wrench can be frustrating after using these and the Cobra pliers. Theres no comparison
I agree these are really nice wrench pliers but they don't seem quite heavy duty enough for you to actually stand on the handles even though people say they seem to hold up in the workplace
They changed them several times. The fist version they ever made was made from sheet steel (leaser cut?) stacked up and welded. Don’t know where mine is, maybe lend and nit given back. And they offer the little screwed in bolt, with the teeth as an replacement. They where made from high strength aluminium so that the rest should last. Is it still Aluminium?
@@CatusMaximus Also the little nub sitting in the joint? I thought they would keep that to be a wear item, to safe wear on the teeth in the slot of the box joint.
Great review, as usual. Really like the comparison with Seargents and Channellocks. Cool how they straighten wire! I'm sticking with made in the USA, however. Ty.
@@jimalcott760 You should take better care of your tools. I have rust-free Channellocks from the 70s. And, there are 1950s Channellocks still being used across my family.
I haven't use these in a while as well but since digging them back up I do appreciate using them. Especially when you want to use a pair of pliers to squash something these work pretty well
I wouldnt! I love my pair of the 125mm size. I used them today to dissemble a bike with really rusted nuts. Everytime I use my knipex products im always amazed at how well they do their job with ease like theyre being paid extra to the job ;p
I’ve bent channellocks and I have broke a knipex pliers wrench but after years of use. It broke right where you said and yes I used a cheater. I’ve used them as a hammer.
I've used them to do the whole plumbing in my house. These pliers are really great! They even make an insulated version (rated up to 1000V) for electricians: www.amazon.de/86-250-Zangenschl%C3%BCssel-tauchisoliert-VDE-gepr%C3%BCft/dp/B000XJ534G/ref=sr_1_1?ie=UTF8&qid=1535227601&sr=8-1&keywords=knipex+zangenschl%C3%BCssel+vde The insulated version got size markings so you can preadjust the size.
I disagree with your evaluation that there is any situation that a crescent wrench of equal length is better then the knipex plier wrenches. I’ve literally got rid of all my crescent wrenches after getting these.
Easy, agriculture, oil and gas, heavy equipment. I've worked in all of these areas and the wider jaws of the adjustable wrench and the wider stouter beam do make all the difference. Granted knipex does excel in HVAC AND Electrical applications
In Eastern Europe, the 180 mm wrench plier is 73$, so double than your price. This kind of shit happens a lot here as if we are richer than any country in Western Europe.
Yes I absolutely understand I've heard that before because it's tough dealing with an overseas based company and they don't make their retailers accept warranty returns
Knipex USA anglicizes it as "Kuh-NIP-ex". It's German for "You Wish You Could Afford a full set." ua-cam.com/video/Pxb4vwgZFN8/v-deo.html Love the vids.
Yes, they probably are better than the options.......but are they enough better to justify the price difference? What about when you leave one on a truck you're working on. Which tool would you prefer to loose 🤔?
Pronounce the “K”. The manufacturer says so. The only real problem I have with these, which I didn’t think about until after I bought mine, is that you can’t grip anything round. Fortunately, my other tools do.
Na these are more for HVAC and electrical. I have worked in agriculture and the oil and gas industry and also some crane repair. You really do need the robust beam of a crescent wrench coupled with the wider surface area of the jaws. I like these pliers but I have never seen them used in ANY of those operations I've listed.
They blow away channel locks. Anything made in Germany is going to blow anything made in China or America right out of the water. This manufacturer is no different. Insane quality tools but you pay for them
The most ridiculously small button head for thumb control and irritating and imprecise button push down to permit jaw sliding imaginable. Dear Knipex - thumbs need a wide button head and and less button travel to disengage to jaws. Reviewers demonstrating at bench level should note that adjustment onto a fastener below workbench level, for example, is almost impossible due to the stupid button. Really disappointed with my purchase of the 10 inch version.
Great point about build quality - with any unusual/unique/innovative design, the build quality determines whether it's going to end up as a short-lived gimmick or something that will be in everyone's toolbox in 20 years. Nice review. I might have to pick up a set.
Catus ole boy....i have learned so much by watching your videos. I have followed your advice on my tool purchases
I love this tool. But I disagree with what you said about the jaw size making them more likely to round off fasteners. One of the coolest things about this tool is the way that any torque applied to the rear handle is transferred into additional clamping force at the jaws. I think the thinness of the jaws might make them more likely to mar the fastener when lots of force is applied, but they they won't round the corners off like a typical wrench would. The harder you push on the handles, the harder the jaws clamp onto the flats of the fastener rather than digging into the corners. I imagine a regular wrench might widen a little bit under extreme force, but this tool does the opposite.
I think you are correct, i believe the adjustable crescent wrench would be the one you want to go to if you want to round the edges...
I use them at work, have both of the sizes you reviewed. Excellent hand tool
Yes I really like these pliers as well someday I'll get the larger sets.
The first time I saw these (20 years ago iirc) I thought it was just an unnecessary gimmick but I have come to realize many practical uses and they are now on my wish list.
Yes they're interesting pliers I do like them for just general projects we don't want to dig up set of pliers and wrenches
I bought a pair as soon as I saw them back then. Still have them.
Kevin Gittemeier luckily I bought them back then. I’ve even used them as a hammer.
They are also great for plumbing fixtures,brass and chrome that you don’t want to mar up.
Indeed
This is why I bought these. I would go as far to say as it's almost their primary application for most people.
@@johnjingleheimersmith9259 Agreed, when I grabbed mine the rep had a look of horror wash over him when I asked how well it handled grease n oil for automotive work.....meh, I bought it, Ill mess it up as I see fit :S :P :D
@@chrisclement3706🤣 I share the same sentiment. I just ordered the 5 piece set. How well have they held up?
@@user-lz1zj4gq6v I'm quite pleased.
They work very well, generally making my amateur ass look semi pro :D
Ive found that I really like/find satisfying that squeezing it harder seems to make it work better.... probably placebo, tho I could fabricobble some legit sounding maybe reason for it, I dont care: It feels unreasonably satisfying :D
I should note that I dont beat on it tho.... If it cant get it, I go get a proper socket and a breaker bar (or my Knipex Cobra water pump pliers...they seem to thrive on punishment; I havent found a supper too hot for em yet ;) )
Cheers
These are so freaking awesome they really caught my eye I’ve never been a fan of Channel lock pliers they’re unpleasant to my eye but these Pliers wrenches are really awesome
I bought the little ones, 6 inch. Remarkable tool. I have not fumbled with an adjustable wrench since. Their little Cobra pliers are really good too. Knipix makes some killer stuff- the steel is top notch. The design is cutting edge kinda tool stuff.
I just got these about a month ago and they are awesome, I work in industrial maintenance and they work so much better than adjustable wrenches. Though if your working in a very tight spot it a little annoying but iam sure the more I use them that will become easier.
I like them a lot as well although they're narrow Jaws give better access, however, sometimes you need the wide surface area of a traditional adjustable wrench
I bought the 5 pc set. Soon I regretted it, feeling they weren't as useful as I had hoped. After 2 years of owning them I now feel they are a great value. They do well for wrenching as long as you have good access, but they really shine for being smooth jaw pliers that won't mar up the work piece.
I use them every day. There impossible to slip on a nut. You don't necessarily need to squeeze them. If you keep pressure on the leverage handle it's impossible to slip. You will never be able to break them with your hands. Trust me. Idiots at work have used them out of there norm limits and never even phase them. One of my favorite tools of all. Perfect for bending sheet metal also. Just bought the 400mm version today. Take care
They are indeed very strong and I do like how they function but I have seen a broken pair it was actually just a couple weeks ago although the person was putting a lot of twisting force on them almost like they were intentionally trying to break them don't ask me why
Either a 180mm or 250mm is a perfect tool for a small toolkit. And the Chrome plating is worth the expense if you work in wet or humid environments.
They look amazing! I want them!
Nice review Catus! The way they pronounce Knipex in Germany is K-nee-pex. Hard K sound, then nee (sounds like knee), and the pex. Seems like nobody outside Germany pronounces it right, it's a tricky one.
these are cool, i have both these sizes. I use them for doing alignments on cars, because no matter what the size of the tie rod or jam nut these two wrenches cover anything you will encounter. Using them since summer 2009, and they are still awesomre. These really are built to last. good stuff
Yes they are very high quality and well-built
These don't round fasteners and you get great leverage with these. I use the 7" pliers wrench every day. They ratchet around the fastener and you never have to re-adjust the opening like traditional adjustable wrenches. I use them in many of my videos. I am not gentle either with my tools.
Thank you for your comment knipex tools seem to be pretty nice and very high-quality. I'm a little more hesitant in recommending now after hearing and reading about difficulties getting warranty replacements. That being said there's a local tool repair shop here that also sells knipex tools and I asked them and they said if an knipex tool breaks that they will personally deal with replacing it. So I would always ask the retailer where you're buying them about that
@@CatusMaximus For the record, a couple of years ago I had to replace a pair of the 10" version that disappeared... got the replacements off Amazon. The replacements were tight to adjust, but I thought they'd work in, but no, and by that time it was too late for an Amazon return. I searched the Knipex website and found the warranty info... and wrote them. Heard back within minutes; they wanted a receipt, gave me an address (in the US midwest) and off they went. They sent the replacements out right away. However, I have a distinct feeling that without a receipt, it would have been a different story... as always YMMV.
Excellent review. Thanks 🙏
Thank you
My dream pliers..knipex...
One thing you didn't mention is that they sort of have a "ratcheting" feature due to the play at each locked position. This allows you to keep the plier on the fastener, release your grip, and rotate in the opposite direction freely without disengaging the pliers fully from the fastener.
Yes I should have mentioned that although only on the smaller Fasteners on the larger Fasteners the Jaws do not open wide enough for that ratcheting action
No matter the wider jaws of a cresent wrench, Knipex won't damage a bolt, as a cresent wrench sometimes does. Why, because of the paralel 10times more powerfull grip, that any cresent wrench doesn't have. Cresent wrenches rely on a screw, that is loose no matter how much you have tighten it. Knipex however, work like pliers plus the 10 time more force applyed on the parallel jaws,never damages bolts, like cresent wrenches do!
These are awesome pliers
Yes
Best pliers in the world! Nothing even close
Greatings from Germany :D
Hello, welcome to my channel
I had a ridiculously tight Nut which was starting to round on a thread with was bent.
My 250 version managed to undo it and bend the Nut back into shape. Managed to bend the thread back straight as I was tightening it
damn
@@tra6ic741
"damn"
Isn't that the same thing that your mother said to you?
@@tallswede80 could more swear words but yeah
You should review Knipex Cobra pliers too.
they also multiply force, i have a set!
Knipex are the best pliers!
They are nice indeed.
Opinion....
@@pooki3slinger832 it's difficult to argue in terms of Cobras and Pliers Wrenches. There may be some better for some applications, but the Knipex ones of these are amazing. They may not be worth it for everything, but I am very glad I got the ones I did.
It's worth noting that an adjustable or fixed wrench cannot grab a fastener the way these do and at the same time be able to release it. An adjustable wrench or fixed wrench always has to have a tolerance to be able to slide onto a nut or bolt head, or a straight surface, so this really has less ability to round something. I've never seen an adjustable wrench with less than a MM of play, as far as I know, and often they are not exactly straight. My experience with Crescent wrench is his that they have the particularly annoying future turning inwards at the top, which forces them to have even more tolerance going over a bolt or flat surface. Thus, I think they are genuinely better than other tools for a lot of applications.
I can understand about crescent wrenches and your comments about there Precision my experience with newer ones has been the same however I did a review some industrial finish with orange handle American-made ones and those jaws are absolutely parallel and are very tight tolerances they do not wobble around and hold very nicely. I do like these knipex pliers the one issue I have is the Jaws or a bit narrow and I've had issues with them denting in some Fasteners where crescent wrenches have nice wide Jaws and in some situations you really need that additional surface area especially if you're using a crescent wrench to Bend pieces of metal or do other tasks
These would be great for kitchen/bath fittings that you don’t want to mar up.
That is a great use
I use these daily and Knipex lineup is second to none. Using a channel lock or a crescent wrench can be frustrating after using these and the Cobra pliers. Theres no comparison
Knipex makes some great pliers. I have never seen anything like these before.
And now they'll be forever in your mind...
These are just patented by Knippex, so currently there can't be other ones of this construction.
If you find another tool like these, you can be assured they are re-branded Knipex plier wrenches.
Yea the best thing after slice bread 🍞
I have the Cobra pliers that I like but this pliers wrench costs twice as much as that did. Prices have gone up on these.
Right, I come back to look at various Knipex tools. Seems they only go up when I compare them to videos even just 2-4 years old.
they are absolutely with it no question
This guy likes his crescent wrenchs.
right lol its like it hurts him to admit these are far superior in every way
i have 300mm version, nice tool a bit springy handles .
I agree these are really nice wrench pliers but they don't seem quite heavy duty enough for you to actually stand on the handles even though people say they seem to hold up in the workplace
Catus Maximus My dad has a pair that’s more than 20 years old and still holding up to daily abuse.
Each costs U$100 where I live. Also, minimum wage here is around U$200/month. Therefore, each costs two weeks of pay of a regular person.
So if someone were to steal these from you. I would imagine that the consequences would be dire?
They changed them several times. The fist version they ever made was made from sheet steel (leaser cut?) stacked up and welded. Don’t know where mine is, maybe lend and nit given back. And they offer the little screwed in bolt, with the teeth as an replacement. They where made from high strength aluminium so that the rest should last. Is it still Aluminium?
They are modern now completely forged alloy tool steel. No plate steel no aluminum
@@CatusMaximus Also the little nub sitting in the joint? I thought they would keep that to be a wear item, to safe wear on the teeth in the slot of the box joint.
nice
Indeed, 🔧
My man got choked up talking about those large soft nuts!
Crass.
7" on wish list
Great review, as usual. Really like the comparison with Seargents and Channellocks. Cool how they straighten wire! I'm sticking with made in the USA, however. Ty.
Some people really swear by them I finally work okay and people say that they're reasonably durable
Mark Adams, my channelocks always rust....
@@jimalcott760 You should take better care of your tools. I have rust-free Channellocks from the 70s. And, there are 1950s Channellocks still being used across my family.
Knipex is best for pliers.. all pliers..
I wish they were only $50 in Australia (over 200$ here!)
that is flat out price gouging.
@@CatusMaximus yep
I've had larger one bought for 50 bucks used em 10 or 15 times when new & they've been in my junk drawer since 2013
I haven't use these in a while as well but since digging them back up I do appreciate using them. Especially when you want to use a pair of pliers to squash something these work pretty well
also work great for not marring up the bolt!
You'd rather use a crescent wrench than these?
I wouldnt! I love my pair of the 125mm size. I used them today to dissemble a bike with really rusted nuts. Everytime I use my knipex products im always amazed at how well they do their job with ease like theyre being paid extra to the job ;p
Sell them to me for 20
I seen them at Menards
I’ve bent channellocks and I have broke a knipex pliers wrench but after years of use. It broke right where you said and yes I used a cheater. I’ve used them as a hammer.
I've used them to do the whole plumbing in my house. These pliers are really great! They even make an insulated version (rated up to 1000V) for electricians:
www.amazon.de/86-250-Zangenschl%C3%BCssel-tauchisoliert-VDE-gepr%C3%BCft/dp/B000XJ534G/ref=sr_1_1?ie=UTF8&qid=1535227601&sr=8-1&keywords=knipex+zangenschl%C3%BCssel+vde
The insulated version got size markings so you can preadjust the size.
Some electrically rated ones would be nice especially for the soft grip handles
I disagree with your evaluation that there is any situation that a crescent wrench of equal length is better then the knipex plier wrenches. I’ve literally got rid of all my crescent wrenches after getting these.
TAC Systems channelock crescent wrenches are small and have 1 1/4” opening pretty handy, should check them out
Kontaijuss QC who hasn’t?
Easy, agriculture, oil and gas, heavy equipment. I've worked in all of these areas and the wider jaws of the adjustable wrench and the wider stouter beam do make all the difference. Granted knipex does excel in HVAC AND Electrical applications
i agree completely with you, these are game changing
Best tools and helpful , expensive but worth, I have one, better than set of wrenches.made in Germany .
Great video but, the K in the name is pronounced it is not silent!
I always mispronounce stuff
In Eastern Europe, the 180 mm wrench plier is 73$, so double than your price. This kind of shit happens a lot here as if we are richer than any country in Western Europe.
I paid the equivalent of $115 for the 5 plier set when I ordered from Germany. Included from 125mm to 300mm.
Well made tools, I have had trouble with getting warranty replacement, that is a problem, or was for me. That has stopped me from buying again.
Yes I absolutely understand I've heard that before because it's tough dealing with an overseas based company and they don't make their retailers accept warranty returns
Knipex USA anglicizes it as "Kuh-NIP-ex". It's German for "You Wish You Could Afford a full set."
ua-cam.com/video/Pxb4vwgZFN8/v-deo.html
Love the vids.
Are you the we all juggle knives guy ?
Yes, they probably are better than the options.......but are they enough better to justify the price difference? What about when you leave one on a truck you're working on. Which tool would you prefer to loose 🤔?
simple solution, dont loose your freaking tools duh
Saludos
must be new to the brand KNIPEX....
Pronounce the “K”. The manufacturer says so. The only real problem I have with these, which I didn’t think about until after I bought mine, is that you can’t grip anything round. Fortunately, my other tools do.
Mel Gross they have cobras for that.
jim byrne we’re talking about this one. I know what they have.
Irwin has a similar function, simpler design @$23-28:
Yes, but the steel is crap. You get what you pay for.
hey catus you are pronouncing it correctly knipex the eye is short.
Kuh nee pex.
You can’t be the best and the cheapest at the same time.
You obviously don't know very much about Knipex if you think those aren't as strong as a crescent wrench!
Na these are more for HVAC and electrical. I have worked in agriculture and the oil and gas industry and also some crane repair. You really do need the robust beam of a crescent wrench coupled with the wider surface area of the jaws. I like these pliers but I have never seen them used in ANY of those operations I've listed.
Knipex cobras for teeth lol
It's pronounced k-NEE-pecks.
It's not Nipex its Knipex.
You will not be able to break these pliers with your bear hands.
With a bear's hands I could... but probably not with my bare hands...
You're saying it wrong, the K isn't silent.
its kin-ip-ex. NOT like knife. more like "next of KIN". thanks
They blow away channel locks. Anything made in Germany is going to blow anything made in China or America right out of the water. This manufacturer is no different. Insane quality tools but you pay for them
Learn to pronounce the correct German name. please!
I will work on it
You said it correct , most UK people say it as NIPEX , as if germans pronounce every english word correctly anyway !!!!
The most ridiculously small button head for thumb control and irritating and imprecise button push down to permit jaw sliding imaginable.
Dear Knipex - thumbs need a wide button head and and less button travel to disengage to jaws. Reviewers demonstrating at bench level should note that adjustment onto a fastener below workbench level, for example, is almost impossible due to the stupid button. Really disappointed with my purchase of the 10 inch version.
LMAOOOO you cant be serious??