Really good job. I'm looking for the lamp holder you have on your profile picture. Can you tell me where you got it from? How big is the headlight 7 inch? Thank you in advance
Hey Limited Edition, I hope you might help me. I'm having a bit of a problem with the Unit Garage kit. On the right side, you have to place it between the Telelever and the engine, as you said it's a very tight fit but with the help of a friend weighting down the motorcycle it was very helpful. Although when the bike is on the center stand the Telelever go so far up that it pinches the metal oil line between the Engine and the Telelever. Do you also have this problem?
Hey 😃 I have no pinch between the telelever and the engine. Maybe try to adjust/rotate the fitting in too of the engine. Or maybe is a production problem
How did you remove the 2 stars pattern breakable screws that hold the ignition lock? I see you bent some steel and used those screw to hold the headlight and turn signals and trying to do the same but those screws, they are a nightmare to remove and I'm unsuccessful so far.
Hi I just used an angle grinder, and cut a grove in the head of the screw. And then I used a flat headed screwdriver. otherwise get the Ignition security bolt fitment tool
Hey man, i'm into buying a r1100gs but i'm a bit worried for any problems (Since it's 20+ years old) and about that oil cooler. Will it prevent me from riding for many Kms in hot weather?
My chrisgeo! Do it! My bike has done 160000km and runs without any problems. Is a really well build machine bmw has made. I have not found any problems with the cooling. And compared to old honda's and yamaha's bmw have both cooling fins and oil cooler. So I don't think you should worry.
@@victorbh94 Great then! I'm gonna custom the sh*t out of it too. Thinking for a military green or black-grey camo tank for now:) Oh, one last thing. I heard some rumours that it's hard to find reliable mechanics to work on the specific bike, and BMWs generally, and when you do find someone service and other maintenance work is expensive asf. What's your opinion on that?
Hey man! Long time no vids:) Could you shoot more of riding footage please? The bike looks great and sounds awesome, but the only riding is shown on like 5 seconds on start of this vid :(
Hejsa, det ser godt ud. Har plan om at købe en R1100gs og så prøve at byg en scramler eller caferacer, har ikke lige besluttede det. Men hvad kostede din cykel inden da du købt det og hvor meget har du brugt ekstra?
Hey Zabi Fed ide! Ville jeg meget gerne følge med i! Jeg købte min i Sverige for 20.000sveske. Og så 22000 I dansk afgift. Hvad jeg har brugt af ekstra har jeg ikke helt styr på. Men godkendelse af steld og mit motogadget opsætning har nok være de 2 dyreste poster på ialt 11.000kr
@@victorbh94 Ja okay, det lyder ret vildt at du skulle betale 22000 i afgift. Sidst jeg hentede en Honda CB 750f fra Tyskland skulle jeg ikke betale noget. Men det må jeg lige tænke over hvis det koster så meget. Så har du også brugt en del på det. Jeg har ikke plan om betale mere end 15k i alt, jeg må se hvad jeg kan få det til. Men tak for info.
Really good job. I'm looking for the lamp holder you have on your profile picture. Can you tell me where you got it from? How big is the headlight 7 inch? Thank you in advance
Hey thank you! The headlight holder is made by myself. And is a 7 inch. Can make a video about it. Planing to make a new one.
Hey Limited Edition, I hope you might help me.
I'm having a bit of a problem with the Unit Garage kit.
On the right side, you have to place it between the Telelever and the engine, as you said it's a very tight fit but with the help of a friend weighting down the motorcycle it was very helpful.
Although when the bike is on the center stand the Telelever go so far up that it pinches the metal oil line between the Engine and the Telelever.
Do you also have this problem?
Hey 😃
I have no pinch between the telelever and the engine. Maybe try to adjust/rotate the fitting in too of the engine. Or maybe is a production problem
How did you remove the 2 stars pattern breakable screws that hold the ignition lock? I see you bent some steel and used those screw to hold the headlight and turn signals and trying to do the same but those screws, they are a nightmare to remove and I'm unsuccessful so far.
Hi I just used an angle grinder, and cut a grove in the head of the screw. And then I used a flat headed screwdriver. otherwise get the Ignition security bolt fitment tool
Hey man, i'm into buying a r1100gs but i'm a bit worried for any problems (Since it's 20+ years old) and about that oil cooler. Will it prevent me from riding for many Kms in hot weather?
My chrisgeo! Do it! My bike has done 160000km and runs without any problems. Is a really well build machine bmw has made. I have not found any problems with the cooling. And compared to old honda's and yamaha's bmw have both cooling fins and oil cooler. So I don't think you should worry.
@@victorbh94 Great then! I'm gonna custom the sh*t out of it too. Thinking for a military green or black-grey camo tank for now:)
Oh, one last thing. I heard some rumours that it's hard to find reliable mechanics to work on the specific bike, and BMWs generally, and when you do find someone service and other maintenance work is expensive asf. What's your opinion on that?
@@chrisgeofitness sounds good man! I'm also planing to panit my second gastank, in a military green. like the danish eh-101 helicopter that I work on.
Hey man! Long time no vids:) Could you shoot more of riding footage please? The bike looks great and sounds awesome, but the only riding is shown on like 5 seconds on start of this vid :(
Yes! But I waiting for the danish summer😉
@@victorbh94 great! Looking forward for some more!:)
Hejsa, det ser godt ud. Har plan om at købe en R1100gs og så prøve at byg en scramler eller caferacer, har ikke lige besluttede det. Men hvad kostede din cykel inden da du købt det og hvor meget har du brugt ekstra?
Hey Zabi
Fed ide! Ville jeg meget gerne følge med i! Jeg købte min i Sverige for 20.000sveske. Og så 22000 I dansk afgift. Hvad jeg har brugt af ekstra har jeg ikke helt styr på. Men godkendelse af steld og mit motogadget opsætning har nok være de 2 dyreste poster på ialt 11.000kr
@@victorbh94 Ja okay, det lyder ret vildt at du skulle betale 22000 i afgift. Sidst jeg hentede en Honda CB 750f fra Tyskland skulle jeg ikke betale noget. Men det må jeg lige tænke over hvis det koster så meget. Så har du også brugt en del på det. Jeg har ikke plan om betale mere end 15k i alt, jeg må se hvad jeg kan få det til.
Men tak for info.
Looks awesome. Do you know how much weight you took off the bike?
A lot 😅