AMR Budget Low Mount S550 3.7 V6 Turbo Kit!
Вставка
- Опубліковано 30 вер 2024
- automafiaracin...
S550 Budget Turbo Kit Here^^
Make some power and have the best sounding exhaust for a 3.7 mustang ever. No Rasp and still can be catted!
Buy Your Performance Parts From the Mafia: automafiaracin...
Facebook: / automafiaracing
Instagram: / automafiaracing
We use UA-cam Buddy to help our Channel: www.tubebuddy....
#AutoMafiaRacing #PartsPassionPerformance #AMRorDIE #MafiaTuned #VeteranOwned #JoinTheFamily
Auto Mafia Racing LLC, and Auto Mafia LLC are in no way telling you to attempt these mods, or to drive, or do what we do. Please consult a professional mechanic prior to doing any work on your vehicle. We will not be held liable for any actions taken due to the viewing of these videos.
Tags: Auto Mafia Racing Auto Mafia Drag Racing Parts Passion Performance Dyno Tuning
Dude you’re really helping the v6 Mustang game. You’re going to unleash all these 500HP v6s Mustang on the road to just start killing the competition. GTR who?
We already have shipped over 50 kits
I wish i could do these mods. My mustang is a california daily driver 😭 I only drive it 5 miles each way to work so maybe i can get away with more
Well i see a vomment about california and i havent eatched thewhole video so ignore me i guess 😂
The evolution of this kit has been incredible to witness
We still offer our normal engine bay kit for the big power customers!
Wow! Awesome as always. Was looking at a STS rear mount in the past. You knocked it out of the park! Keep up the 3.7 support.
We will keep rocking no worry!
"Only 450 hp" haha like most folks even know what to do with that to the wheels. Great value for the money imo and i guess i better get saving!
right? We are just used to our other kits and 500-600 rwhp from these 3.7s haha
This kit looks really enticing. And you said E85 would make about 500 wheel??
Also, my 3.7's on Eibach sportline lowering springs; would that potentially scrape the turbo?
E85 easily makes 500 and can make beyond that prob but there’s other things that start going bad at those numbers because ✨FORD✨
Its a turbo kit so to make more power we just make sure we have enough fuel and then turn up the boost controller. The kit has a 2.5 inch pipe under the car. So clearance on very low cars going over speed bumps can be an issue. But the pipe is very solid and can take the scrap and hit without issue. We designed it this way on purpose.
@@automafiaracing You've got me so excited to get this AMR. I hope it stays for on sale for a while because I was thinking Procharger but this definitely got my attention! :)
Do you guys plan on making a DIY Tutorial? I absolutely love this kit it’s what I’ve been looking for instead of upgrading to a GT.
Yes we are going to make one.
Wow. You guys are killing it! This is amazing to see, for sure! Keep up the awesome R&D and Fab work!
We will thank you!
You know, turbskis or not, having listened to these builds A LOT...
AMR could sell this as "THE BEST SOUNDING EXHAUST EVER" and it wouldn't even be subjective.
Hawt damn am I in love 😁
Right?!?!
I’m down with this in California I gotta hide the mods anyway
Lets get you a kit.
Glad I bought a 3.7l as oppose to the ecoboost. Wish I had the budget for this...
we have payment plans or lay away.
How difficult do you think the installation would be without a lift?
I mean you don’t need a lift, if you have Jack Stands and a Jack it’s the same thing, so realize you need to run piping and instal clamps and a whole turbo under the car. In my opinion u don’t need a lift without it the job will become slightly more difficult that’s it…
100% doable.
Dang.... that's some nice numbers! 🇺🇸
We liked them
I cant wait to get my kit installed on my 3.7!!!!
heck yea!
"Whenever have you seen a sad person with a turbo?" EXACTLY
Truth
Never thought about rear turbo allowing long tubes.
yup
Cant wait to see it on an s197. Wonder if ground Clearance will pose a problem since my car is lowered 2.25 on all four corners 🤔
The lowest point sits 2 inches below the frame.
I can't wait to get one, I foresee a 401k loan in my future lol!
Send it
Been looking for a good rear turbo kit
hit us up!
3 Questions:
1. What if my car is lowered would it scrape the pipes?
2. How much power if I put this with the E-85 kit?
3. Can I keep my tommy gun pops with the turbo?
1. Depends how low you are and if you are talking scrape all the time, or on speed bumps, etc. It doesnt seem to scrape on normal driving on a lowered car. But it may touch on speed bumps. The PIpe is nice and thick though so it will not get damaged.
2. Its a turbo. So to make more power we just turn up the boost controller to more boost and make sure we have enough boost.
3. Of course you can still have your tommy gun tune!
@@automafiaracing 1. Fronts lowered 1in and rears lowered .5in
2. So I’m hearing 550hp?
3. Yes yes yes, popopopopopopopop
How far are u guys away from Ohio ? I’m 9miles east of Columbus 😂would love a turbo kit on my sn95 gt as well as my s197 4.0 v6
We are located in Billings, MT 59101 now.
Is there any way to keep dual exhaust look with this kit?
yes. run the Wastegate scream pipe to the other muffler.
First speed pump and no more boost. Thick metal or not. Find a way to tuck it in or build it into the mid pipes. It might work but aluminum angle brackets and zip ties are a turn off. Probably an eBay Chinese turbo.
100+ of them out there and speed bumps haven't taken out a single one. And we use Precision Turbos in our kits or Comp Oilless. Thanks for watching.
I need bright to you my mustang
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Sounds amazing
sure is!
Question. So let’s say I get this kit then down the road wanna make more power. Would I just need injectors, a pump and a tune from you guys? Only gripe I have with the 600hp kit is the sound, and this one sounds amazing.
Other kit sounds different with every exhaust system put on it. And yes you would need more fuel for more power always
You got me at the end of the video for thinking of us I California your the best my man! Can't wait for built hurricane to come back
amen!
Do I have to build the engine ?
No
Do o have to build the engine ?
Nope
Nice, one of the things I always hated about ford V6's is that they sound like garbage. Nice price for the kit.
Right? Us too. But this one sounded amazing!
The rear mount turbo looks and sounds absolutely amazing
We agree!
So 450 on pump and 600 with e85? That's what it says on the website atleast that's really good.
Limited by the fuel system yes.
@@automafiaracing understandable. I'll be ordering one soon hopefully but with the fuel system.
Would you recommend on a motor above 170,000 miles ?
God no
Yes send it. These motors are tough
Cant imagine a twin turbo setup of this in the future 🔥
No point unless you like wasting money
Auto Mafia Racing is their a smaller turbo to be sequenced with this turbo? To spool quicker in lower rpms?
It doesn't need to spool quicker lol.
Can you push high boost on e85 with that kit ? Assuming you add a boost controller and a c02 tank ?
Yes
do you guys have the tommy tune for the new 2020 gt500?
yes
@@automafiaracing any videos of tommy gun tune for the 2020 gt500?
I dont have any sorry
will the low mount Turbo kit for the s197 be on sale for at all this year for the holidays?
Its on sale now for $2999. It's going up to $3500 again soon.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Do you guys write tunes to help me with my problem? I have a v6 that I haven't been able to get more than 3 monitors ready for over a year.
We can see what we can do
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
If i have borla catboack will it work with this kit. Also how much for you to install it if i drive down to bradenton?
Yes it works. We are in Billings MT.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Do you all have a kit for the 4.0 v6?
We do not at this time but we can always make one.
@@automafiaracing great thank you. Could it be a kit where the owner pics the turbos option or is it all a few options
Does this increase fuel economy at all or keep it near stock?
It all depends on your right foot and how hard you are on the gas.
Can I do this on an f150 with your kit? 3.7
Yes
How will this hold up in puddles??? 🤔
100% fine. Why would a puddle cause any issue? Does a puddle dunk your entire car underwater? To hurt the car you would have to fully submerge the turbo and suck up GALLONS of water. It would have to fill most the cold side and intercooler. It's just not going to happen unless you back it down a boat ramp into a lake.
@@automafiaracing thanks for the reply.
anytime
so its $3500 for kit and another 3k for installment?
Yes the kit is $3500 shipped currently.
how much would it be for full kit and if you guys install it on my 2014 v6 mustang manual trans.
Starts at 3k for parts and 3k for install and dyno tune
Would 500WHP be reliable for a daily or better to go with this kit?
Edit: Could a flex fuel tune or E85r tune be applied to achieve that 500whp?
We do not do flex fuel boosted tunes and don't recommend them. But yes with better fuel and more boost more power is achievable
Are these compliant for CA emissions ?
These do not modify the exhaust before the cats.
this is awesome but im in a really wet area in the winter, would probably have to run the intake up into the trunk to prevent sucking water
A little water is fine. Just can't submerge it
Do I need to do a ecu tune after installation
of course...
Do you ship up to Canada? Thank you.
Yes we do . 📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Just waiting to see videos of this thing against coyotes and stage 3 Ecoboosts
Easily gaps
1. How reliable is it?
2. Can it handle long drives
Very reliable. Yes you can drive it across the country.
How much would this kit make with 47lb injectors on 93
it will run out of injector around 450 rwhp
Would you be able to ship everything except the turbos for lower cost like byoturbo 😆
No.
Just wondering is the setup very similar on a s197 v6? And is there a video on how to do a setup ? since I’m thinking about purchasing, but don’t live near your area
Yes we have videos coming. And yes we have the similar kit for the s197
Damn 460 hp with 1 single thats making gen3 coyote power 🥴
Our other kits make 600+
The 90 degree with the long pipe under the car worries me because my car is on coil overs and is low. Will this kit work with lowered cars?
Yes it will just not have as much as stock ride height cars.
This would be perfect for my 3.7 2014 is that a possibility
of course! check out our website. automafiaracing.com/s197-mafia-low-mount-low-budget-turbo-kit-450-rwhp-torque-/p121001
Holly shit i want one.
In Stock ready to ship!
automafiaracing.com/collections/turbo-kits
What kind of mpg does this change the car to?
Better if you keep your foot off it.
Wish you had this before I got my Borla catback exhaust.
Sell the borla :)
How much power can the 3.7 push before i can reach the point of damage
600 ish. Then you need our built motor
What if you don’t have resonators ?
thats ok send it
So the turbo is only on one bank of the exhaust?
no. there is an X / H pipe that connect the 2 sides.
Any concerns with puddles?
Nope. This is FL
I have a 2016 s550 V6. Basically stock only muffler delete. What do I need to have on my car to installed this kit? Last question do you guys ship to Puerto Rico?
you will need injectors, a fuel pump and tune. all optional and can be shipped with the kit. also yes we ship to PR! we have many customers from puerto rico. after purchasing something from our website, we use your shipping information to get a quote for shipping and send an additional invoice to your email.
@@automafiaracing thank you so much for your quick response! I’ll be looking into it. I now Need to make my own research of who can mount your kit in PR
You can do it! We've sent like 7 kits to PR in the past few weeks
is it possible to later upgrade this kit to make over 500+ HP?
more boost and E85
Where do you go to purchase the turbo kit
automafiaracing.com/turbo-kits-/c674
Were are u guys?
Our shop is located in Billings, Montana
Have yall had issues with that long pipe scraping it looks low
Nope none at all actually. Its tight against the body and very thick. Even if she hits something it will be fine
@@automafiaracing how much do yall charge for everything if yall installed
Love it!!! Keep up the great work at AMR!
Thank you! Will do!
Will you guys make a how to install video on this kit ?
Yes more than likely
I wondered what one with a roush muffler would sound like?
there are no mufflers on this. You cant put a muffler on it.
The driver side exhaust after the resonator wasn't hooked up?
That is where we have the wastegate
@@automafiaracing Understood now.
Gonna need to fix the cold side from tapping during suspension travel
Not really a way around it if you're super low. We suggest our engine bay kit if you are very low.
How is the power curve in comparison?
Looks more like a Procharger but with more torque
When is this kit be available ?
automafiaracing.com/s550-mafia-low-mount-low-budget-turbo-kit-450-rwhp-torque-ford-mustang-2015-3.7l-v6-cyclone/p121002
How much HP do you guess the engine is making, if the dyno registered 363.9?
That's what it's making to the wheels. We don't measure crank hp unless and engine is out of the car and on an engine dyno
@@automafiaracing I've heard 15 - 20% loss. Does that sound right to you?
Yes
I’m hoping to make 500 hwp with this kit. I also have a 2015 automatic. Does the exhaust have to be single exit ? & would I need fuel injectors for it to make 500 hwp ?
No you can make it dual exit
Yes you need a dw400 and fic1000 to make 500 rwhp
Change of plans, I want to do the low budget build and make 450 hwp like in the video. Everything I need for that is included in the kit ?
Still need a tune, spark plugs, injectors.
Whats the cost to install this
we install the entire kit and tune for $3000 at our shop
Turbo mounted out back. Then you showed it. Nice.
Is there any downside to having it after the cats?
not really same amount of exhaust
I'm buying one 😀😃🙂 thank you for making it happen!
Hope you enjoy it!
With this kit, with a auto trans. Do the trans and drive shafts to to b beefed up. I need to save my domes and nickels up. 😆
It’s recommended but not required, you can run this kit on a completely stock 3.7 V6 S197/S550 Mustang!!
They are not required on the S550 no. The DS can always be upgraded but its not a danger item like on the S197
@@automafiaracing What’s a ball park on installation, at your shop and do u recommend your ported intake?
Can you make a kit for my 03 F150, 4x4, 4.6l 2v.
I think they have one just call them and they’ll guide you and if they don’t have one they set you up with everything to do what you want to ur truck…
We can of course. Easiest when we have a car/truck here of course! Hit us up!
Would love to see this work on 2009-2010 Mazda 6 with the 3.7
Probably would with some adjustments
@@automafiaracing that what I wanna hear!
Concerns about water in filter?
None. Think of it as water meth injection. Unless you submarine this thing its fine
@@automafiaracing you think a free flowing exhaust with no cats or high flows would help turbo spool more efficiently
how much does this kit cost?
automafiaracing.com/s550-mafia-low-mount-low-budget-turbo-kit-450-rwhp-torque-ford-mustang-2015-3.7l-v6-cyclone/p121002
Any plans on 5.0 gen3?
Yes once we catch up on V6 kits
the stock gears 3:15 is perfect for boost
Very good for turbo
I wonder how this will sound with a x pipe, also can I still have dual exhaust with this setup?
Yes it can have dual exhaust if you route it. Its just not included in the kit.
So I can keep my x-pipe as well?
How much it would be for you guys to install?
we install and tune ready to run for $3000
Wish i lived were you are I am from California would love this kit on my 3.7
We are now located in Billings Montana
Do you have for 3.8 SN95
We do not. We can make one though if the car is here. Full 1 off kit install and build runs $10,000.
@@automafiaracing where's are y'all location I'm in Alabama
I checked on website is it 3500 or 2990 dollar?..
$3500 for s550 $$2999 for s197 right now
@@automafiaracing is the price going to go up soon or stay around the same? 😁
Should stay around there
@@automafiaracing which kit is it in video s197?
Did you not watch the video?
Very awesome
Thanks
Will this kit work with a 2014 3.7 ?
We have a version of it for the S197 yes.
automafiaracing.com/s197-mafia-low-mount-low-budget-turbo-kit-450-rwhp-torque/p121001
Now I’ve been curious is it possible … to get a twin turbo kit on a s197 ???
Sure we can make one. $10k plus install
Beautiful set up!! Awesome!!
Sounds amazing! Unique set up.
Would 373 gears make any difference?
Yes burnouts for days
3.7 or Ecoboost High Performance?
it says 3.7 in the title. and its a 3.7 in the video. and in the description
@@automafiaracing my apologies I meant your choice on either a 3.7 or The Ecoboost HP. For modding?
@@oldmanj7353 3.7 probably. Eco boost you gotta build the block after 400 hp
@@stanggang768 did not know that thanks..
3.7 any day it’ll last longer since the 4 cylinders are put under the intense stress since the mustangs are really engineered around a V6/V8 engine…
Is the mass air meter on the front of the car or the back of the car ?
front in the engine bay
the intake pipe terrifies me the roads here are horrible i would destroy that so quick
I doubt it. Its incredibly thick. You can run it over and not crush it