Hi, Bebe Quinns! 😊💕 If you've been enjoying this content, consider sending a UA-cam Super Thanks - it's an awesome way to show extra love and support my channel. Just look for the Super Thanks button below the video. Your support means the world to me! Thanks a bunch! 🙏🏻💓"
Hi, @outsideborders8097. For small production po pwede naman po sya medyo mabagal lang po dahil one by one ang pag engrave, also maliit po yung engraving space. For me this is perfect for personal use talaga kasi its compact, pwede dalhin anywhere. For mass production mas better po yung malaking laser engraving machine na pwede magengrave ng maramihan in one run. 😊
I tried many times to engrave on wood but the burning never get balance, other side are black, another side are not..what settings needed to make it proper?
Hi, @lathesso1821. DAJA DJ6 is perfect for personal use. One reason that I do not recommend DJ6 for business is it can only engrave one item at a time. No option for mass engraving in one run. Or might be, I haven't figured it out yet. 🤔
Greetings! What settings do you use miss maam? Is it black&white? Gray?sketch? And how many percent? Im really stress right now not carving precisely huhu. Please help 🙏🥺
Good day! For the photos I used Grayscale, percentage depends on pic on this vid it's ranging 22-25. Also, before staring you have to adjust the laser to it smalles point. I hope this helps.
Hi, @sharenpendon2947! Grayscale po. Eto po detailed video Ng photo engraving on wooden keychain: ua-cam.com/video/zBrD-2JpByU/v-deo.htmlsi=5dW9KWeGIuOKXR07
Hi, @hajlene! For wood engraving, like on this video my settings: Laser Power is 100% and Speed is 70. Make sure to adjust the laser on it smallest point for better results.
Hello po. Naka encounter po ba kayo ng “clearing flash” na message after ma press ang start engraving? Ganito po kase sakin. How to troubleshoot this po? 😢
@@aquinnvlog thank you! Are you planning to do a laser printing business or just merely personal use. I hope you can share which machine's good for a start-up business. Have a good day!
Hi, po 👋 Yes, still working pa rin po until now. Okie naman po ang quality for personal use. Kung gagamitin po for maramihang order ay parang hindi po kayanin ng machine since maliit lang sya.
Hi, mga Bebe Quinns! Complete guide po sa wooden keychain engraving is now uploaded. Please watch and share. Thank you 🙂💕 ua-cam.com/video/zBrD-2JpByU/v-deo.html ua-cam.com/video/zBrD-2JpByU/v-deo.html ua-cam.com/video/zBrD-2JpByU/v-deo.html
Hi! I came across your review on Shopee and found this one useful. Can I ask if aluminum (or soft metals) and stainless steel are possible to be laser engraved using this machine? Example would be laser engraved accessories like bracelets, necklaces, etc. Thank you for sharing! ♥️
@@aquinnvlog Thank you! Will gladly watch it here. :) Hoping you could do a content using that laser engraving machine. More success on your channel! :)
Hi, @sheilajabay2843. Goods sya for small quantity of order. If for bamboo pen po and madami ang volume ng order I would suggest yung laser engraver na kayang mag engrave ng sabay sabay. DAJA DJ6 can only engrave one material at a time.
Hello, pano po ba gamitin ung positioning plate? Ung binili ko unit walang kasamang positioning plate kaya bumili pako separate.. kaso a4 size ung inorder ko pero pinadala a5 size ayynko.. Anyway paano po ba gamitin un base sa app at machine hahaha kc kung ipapatong ko parang wala lng din nmn para lang pala pinatong sa cutting mat dpt pala hndi nako bumili Nainis kc ko sa wrong size na pinadala nila.. luge pa sa presyo huhu
Hi, @MhabsOppus. May mga numbers and guidelines po yung positioning mat para po ma-match/align yung position ng actual material sa software. Pero yung sa akin po ginagamit ko lang for protection ng table ko 😅
Hi, acdi tarlac! Follow niyo lang po yung instruction sa manual, if cell phone po gamit niyo download niyo po yung app nakalagay sa manual. Meron na po sa app automatic settings depende po sa material na gagamitin ninyo.
Hi, @jhemzmontemayordamassn6379. For small production po pwede naman po sya medyo mabagal lang po dahil one by one ang pag engrave, also maliit po yung engraving space. For me this is perfect for personal use kasi its compact, pwede dalhin anywhere. For large production mas better po yung malaking laser engraving machine na pwede magengrave ng maramihan in one run.
Hi, Bebe Quinns! 😊💕 If you've been enjoying this content, consider sending a UA-cam Super Thanks - it's an awesome way to show extra love and support my channel. Just look for the Super Thanks button below the video. Your support means the world to me! Thanks a bunch! 🙏🏻💓"
hello it can cut acrylic or 3mm board?
Can you make print om size 5mm x 10mm? 🙏 help for answer
Does this carve stone and gems as well?
Do you know how to set English language on the up?
How much time printing the bamboo pen?
Hello how do you center your laser to the product? Thanks
Hi, Toni. Just click regional targeting button on the app or the middle button on top of the machine.
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
Anytime I use mine it just says “clearing flash” any help with that please?
same!
Hello, how can you connect it to bluetooth, it says connection failed
Thin wood settings ؟
why its not for bussines ??
I’m wondering too
Hi, @outsideborders8097. For small production po pwede naman po sya medyo mabagal lang po dahil one by one ang pag engrave, also maliit po yung engraving space. For me this is perfect for personal use talaga kasi its compact, pwede dalhin anywhere. For mass production mas better po yung malaking laser engraving machine na pwede magengrave ng maramihan in one run. 😊
Pano po ma center ang engraved@@aquinnvlog
Pano mg.order yan maam
Hello what do you recommend po for business?
I tried many times to engrave on wood but the burning never get balance, other side are black, another side are not..what settings needed to make it proper?
any types of materials po kaya nya engrave?
Hi
I have the same machine suddenly the laser doesn't work any more can you tell me what's the problem plz if you know
What sittings I should for thin metal engraving? My Daja won't engrave it. Please help.
Hi! Is it painted thin metal?
May I ask the settings fpr the picture?
Hi! I have a separate video about engraving photo on wooden keychains kindly check my channel. Thank you.
Did you try it on other than wood?
Yes, I did. Here's the link:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
Does it give out burning smell when it is working?
Yes, it does.
Hello. Why don’t you recommend for business?
Hi, @lathesso1821. DAJA DJ6 is perfect for personal use. One reason that I do not recommend DJ6 for business is it can only engrave one item at a time. No option for mass engraving in one run. Or might be, I haven't figured it out yet. 🤔
Hello can you teach how to engrave such as pencil? I cant get this to work im sorry
Hi, I uploaded new vid about pencil engraving. Check it out. 😁
The First Keychain, How Long It Takes To Finish Thank you
Hi! If you are referring to the kid's photo it took 25mins.
Dit it works on tyres
Greetings! What settings do you use miss maam? Is it black&white? Gray?sketch? And how many percent? Im really stress right now not carving precisely huhu. Please help 🙏🥺
Good day! For the photos I used Grayscale, percentage depends on pic on this vid it's ranging 22-25. Also, before staring you have to adjust the laser to it smalles point. I hope this helps.
@@aquinnvlog OMG! Thank you so much for the help maam ❤️ God bless!
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
@@aquinnvlog every engrave po ba e adjust kada keychain?
how much electricity do you think it will cost per hour?
I want to buy it. But there is power cut sometimes in my locality. If power goes out when it is working, can we resume when power comes back?
You need to start from the beginning po there's no resume feature ang DJ6.
Does the machine still work until now ?
Up
Does this one can laser on stainless steel jewelry? Thanks!
Only on painted metals
Is the picture set as grayscale, sketch or black and white?
Hi, @sharenpendon2947! Grayscale po. Eto po detailed video Ng photo engraving on wooden keychain:
ua-cam.com/video/zBrD-2JpByU/v-deo.htmlsi=5dW9KWeGIuOKXR07
Hi, what settings did you use for the wood engraving? I'm really having a hard time with it. 😔 I hope you can share yours. Thank you! 💜
Hi, @hajlene! For wood engraving, like on this video my settings: Laser Power is 100% and Speed is 70. Make sure to adjust the laser on it smallest point for better results.
@@aquinnvlog thank you! 💜
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
Hi what app do you use to edit picture. Having a hard time editing photos for engraving
You sound like AI Ellen from the Gimme 5 portion of Eat Bulaga! 😂😂
If we put our hands under laser beam, will it burn?
Yes, it will. Don't even try putting your hands under the laser beam it's dangerous.
preciso baixar o software, alguém pode me mandar ?
Hello, ayos pa po ba sya ngayon?
Are engraving using a PC or mobile device?
You can do both but I'm using mobile device.
@@aquinnvlogwhat app po gagamitin for andriod?
@@gilbertrivera3617 "Engraver" po name ng app
Ok pa ba hanggang ngayun yung machine mo maam?
Why is not for business use as well?
It's small, it could not accommodate bulk orders.
Hello po. Naka encounter po ba kayo ng “clearing flash” na message after ma press ang start engraving? Ganito po kase sakin. How to troubleshoot this po? 😢
Hi, @cv432_q. Common error po ito sa IOS 17. Baka po incompatible po sa device na gamit ninyo, try android phone po.
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
Queria colocar em português o app
Why it is not for business?
are spare parts of this machine available?
Hi po, ask ko lang po anong setting nyo for bamboo pen? I'm having a hard time kasi it's always burned sakin kahit anong font 😭
Uploaded na po ang laser engraving on bamboo pen using DAJA DJ6
ua-cam.com/video/1mE-YbwR-GQ/v-deo.html
Hi ,hows the machine.why Is it not recommended for business?
Hi, @airalegaspi1516. The machine is great for personal use. For business, it's better to use a larger one for more production and to save time too.
@@aquinnvlog thank you! Are you planning to do a laser printing business or just merely personal use. I hope you can share which machine's good for a start-up business. Have a good day!
Hello meron ako same unit meron ka ba template para sa pencil jig niya?
hi mam.. may tutorial po kayo for pencil?
Hi, may new upload po ako about pencil engraving. 😁
Can you tell me the name of the app! I lost the direction paper
Hi, @tiennguyenfurniture5903. The name of the app is Engraver.
@@aquinnvlog wonderful, thank you so muchhh🥰
Not MEGA Watts, MILLI watts ... ;)
Ilang minutes mag engrave sa maliit?
Maam hello po... Ask ko po sana if until now nagfafunction parin ang machine mo? Ok po ba quality nya?
Hi, po 👋 Yes, still working pa rin po until now. Okie naman po ang quality for personal use. Kung gagamitin po for maramihang order ay parang hindi po kayanin ng machine since maliit lang sya.
Gano po katagal ang engraving per item? Example po sa keychain po.
Hello, anu po setting ng power and depth nung keychain?
Hi, mga Bebe Quinns! Complete guide po sa wooden keychain engraving is now uploaded. Please watch and share. Thank you 🙂💕
ua-cam.com/video/zBrD-2JpByU/v-deo.html
ua-cam.com/video/zBrD-2JpByU/v-deo.html
ua-cam.com/video/zBrD-2JpByU/v-deo.html
pwede po ba ang plastic?
kagaya ng mga containers po?
Hi! I came across your review on Shopee and found this one useful. Can I ask if aluminum (or soft metals) and stainless steel are possible to be laser engraved using this machine? Example would be laser engraved accessories like bracelets, necklaces, etc.
Thank you for sharing! ♥️
Hi, Danielle! Hindi ko pa po natry sa aluminum. Balikan ko po itong comment mo or upload po ako ng new content soon if magwork sya sa soft metals. 😊
@@aquinnvlog Thank you! Will gladly watch it here. :) Hoping you could do a content using that laser engraving machine. More success on your channel! :)
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
New Upload: Engraving on Different Types of Metal
ua-cam.com/video/0eEV0XrBZuQ/v-deo.htmlsi=F6dbqoh25Zh8ZCWb
Hi, paano po maiwasan madouble yung font?
Hi, @mheantv. One repetition lang po if you are using the app.
How i buy and price i am from India
hi goods po ba ros small business ng engrave ? for bamboo pen etc.thanks
Hi, @sheilajabay2843. Goods sya for small quantity of order. If for bamboo pen po and madami ang volume ng order I would suggest yung laser engraver na kayang mag engrave ng sabay sabay. DAJA DJ6 can only engrave one material at a time.
Ma'am San po sya mas maganda SA bamboo or wood?
Hi, @terearillas6222. Maganda po output both bamboo and wood. Ang gamit ko po sa keychain ay beech wood, sa pen naman po ay bamboo.
good pm po, tanong ko lang anong settings po gamit nyo dyan? tnx
Hi, Chase! Bamboo settings po sa app.
Not recommended for business? Why po
Hello, pano po ba gamitin ung positioning plate? Ung binili ko unit walang kasamang positioning plate kaya bumili pako separate.. kaso a4 size ung inorder ko pero pinadala a5 size ayynko..
Anyway paano po ba gamitin un base sa app at machine hahaha kc kung ipapatong ko parang wala lng din nmn para lang pala pinatong sa cutting mat dpt pala hndi nako bumili
Nainis kc ko sa wrong size na pinadala nila.. luge pa sa presyo huhu
Hi, @MhabsOppus. May mga numbers and guidelines po yung positioning mat para po ma-match/align yung position ng actual material sa software. Pero yung sa akin po ginagamit ko lang for protection ng table ko 😅
@@aquinnvlog
thank you
. Para po kasi hndi match ung sa app at sa positioning mat kaya dko alam gamitin hehe
Milliwatts.. Megawatts would be able to engrave the surface of the moon. Hahaha
pwede po ba sa acrylic? thanks
Hi, @user-wx5gg8df5v. I'll check po if magwork sa acrylic, mag-upload po ako video soon.
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
Name po ng app mam for android? Gusto ko sana itry mag edit.
Engraver app po, check my other DAJA DJ6 videos din po. Thanks for watching.
Pwede din po ba sa glass, plastic at stainless? Thank you.
Hi, @joypineda7102. I'll make a vid for this po. Upload ko po results soon.
@@aquinnvlog done?
Hello po. Pwde po ba sya sa stailess steel? Like sa necklace?
Hi, @erikatagalag5545. Subukan ko po ma'am then upload ko po dito sa UA-cam yung result.
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
DISCOUNTED PRODUCT LINK
DAJA DJ6 best deal on Lazada
s.lazada.com.ph/s.iineh?cc
Hello po.
I also bougth this machine pero nag try ako wala man na engrave😢 anu po ginawa nio set up? Please Share po
Hi, acdi tarlac! Follow niyo lang po yung instruction sa manual, if cell phone po gamit niyo download niyo po yung app nakalagay sa manual. Meron na po sa app automatic settings depende po sa material na gagamitin ninyo.
Check out this new content:
DAJA DJ6 on Different Materials
ua-cam.com/video/1KnXhtQKD3U/v-deo.html
ano po apps gamit
Engraver po name ng app
Cepat ya kk pengerjaannya
Binebenta ko po yung sakin. Need ko po mas malaking engraver. 5k nalang sakin. 3x ko lang na try sa pencil and wood.
Worth it po ba siya for startup business? Like side hustle
May pang pen ka na tutorial
Uploaded na po ang laser engraving on bamboo pen using DAJA DJ6
ua-cam.com/video/1mE-YbwR-GQ/v-deo.html
hi
Please contact my homepage email. I would like to have further cooperation with you,
bat di pwde pang business?
Hi, @jhemzmontemayordamassn6379. For small production po pwede naman po sya medyo mabagal lang po dahil one by one ang pag engrave, also maliit po yung engraving space. For me this is perfect for personal use kasi its compact, pwede dalhin anywhere. For large production mas better po yung malaking laser engraving machine na pwede magengrave ng maramihan in one run.
Pati ba naman pagcut ng tape sa box kailangan banggitin… 😂😂😂😂
@3dots166 para wala pong dead air 😂
3000 megawatt laser? It will burn through to your basement! ;-)
Lol! True enough 😜 mW is milliwatts guys. Sorry for the error 😅
@@aquinnvlog nice video! mine has just arrived, and i can't wait to try it...;-)
@@schottilie that's awesome! I hope you enjoy your DAJA DJ6 💕
can u engrave on thin pen?