REVEVERSE OFFSET BACKING TIPS. Video 6 of 14

Поділитися
Вставка
  • Опубліковано 2 жов 2024
  • Tips - Reverse Offset Backing
    1. Follow all instructions. 2. Practice, Practice and Practice! 3. Correct a poor set up. 4. Blow your Horn for the final Position only when you are sure your Tractor and Trailer is in the BOUNDARIES!

КОМЕНТАРІ • 60

  • @beatrizsmith7293
    @beatrizsmith7293 Місяць тому +2

    Practice makes perfect. Now its fun doing this maneuver

  • @moonman2467
    @moonman2467 7 місяців тому +3

    I’m on my 3rd try. The school teaches you the bare minimum and then they want 100 bucks every time u wanna practice. On top of the 2000 I spent up front. 🤞🏼🤞🏼

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  7 місяців тому +3

      When you was set up for your CDL Test, was you Proficient in all Skills? If not did you receive extra training before the test.? Did you attend every range class and received enough road time?
      Did you print out your records from the FMCSA website? Is what the CDL school submitted truthfully?
      Students need to learn to fight back if they are not receiving what they are paying for. I have you pass your next test and start your CDL journey.

  • @sherrieleemalisch8700
    @sherrieleemalisch8700 Рік тому +4

    excellent video. always end up straight ...use cone and hash lines.

  • @Adam-qt6qq
    @Adam-qt6qq 10 місяців тому +2

    I'm going through this process now. We just switched over to this process. Going into my 7th week of training. I did it my first time I tried it.. On a 28 pup. Massachusetts.. just found this video and your page Today. Great information I'll bring this back to my instructors.

  • @macmc147
    @macmc147 3 місяці тому +1

    Reverse offset "code" is back up until tandems parallel to corner cone, LR(then straighten up with trailer corner at first cone)RL. hard turns each time.

  • @cashaewilliams8678
    @cashaewilliams8678 Рік тому +4

    I pass my off set test 💪today thank to you

  • @melgriefito1387
    @melgriefito1387 Рік тому +2

    Thank Mr. Steve, your a prolific instructor, hat 🎩 off to you

  • @quintinthompson4931
    @quintinthompson4931 7 місяців тому +1

    Hate this maneuver so much

  • @biggupps2394
    @biggupps2394 10 місяців тому

    Smh I failed my reverse offset, I came in on a angle and instead of pulling up to get straight I went all the way out to setup like a dumbass and came back to the same problem smh. I’ll remember this for next time just in case I have the same problem

  • @mongalrai1860
    @mongalrai1860 11 місяців тому

    Hey Steve, thanks for your instructions on how to do offset backing. I am pretty sure that your video helps a lot. Keep posting such helpful videos.

  • @heart444LALa
    @heart444LALa Рік тому +1

    Do I do a hard left or a regular left just stare schooland I'm struggling back with my off ser

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  Рік тому +1

      Yes turn a full left. You need to learn to stop when the tractor and trailer is straight or before the left rear trailer or the right side of the tractor goes outside the alley. It’s pull up time. Getting the tractor and trailer straight into the alley.

    • @arvelwilliams7441
      @arvelwilliams7441 Рік тому

      Thank you so much your video help me understand more

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  Рік тому

      @@arvelwilliams7441 Thank you for your comment

  • @InfiniteLuvv
    @InfiniteLuvv 8 місяців тому

    Thank you so much im going to north american trade school & this is the explanation😊 i need

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  8 місяців тому

      Glad it was helpful! Pass on my channel to as many classmates as possible. Drive NATS up the wall.

  • @evensrobert6808
    @evensrobert6808 Рік тому

    Thank you for your video sir ! I’m struggling to do the set up .

  • @Adam-qt6qq
    @Adam-qt6qq 10 місяців тому

    So if you get 3 of 4 tests and you fail.the last one. You make another appointment for test do you have to do the whole course over again even though you passed the 3 of 4 course. ??

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  10 місяців тому

      You will redo all range skills.
      View my short videos and about 4 more videos on this test. Several short videos and about 4 longer videos.

  • @tiacraig8412
    @tiacraig8412 10 місяців тому

    Mr. Steve where I messed up at my drive, tires went out of bounds on my right, so I’m trying to figure out how to fix myself not to go out of bounds

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  10 місяців тому +1

      On the new testing, it’s not a failure if you’re drive tries starts to go out of bounds. Tester stops you and you will do a pull up. Two points for the encroachment If the encroachment took you to 9 points, that would be a failure. Always know how far to back the tractor into the alley and when to pull up. Many students back the right side out of bounds. Some third party tester, don’t know all of the testing rules.

  • @btaylor8849
    @btaylor8849 4 місяці тому

    Should the back left tire be on the 4th hashtag?

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  4 місяці тому +1

      From the rear cone - heading into the alley - if the trailer is 48 to 53 feet three hash marks or less
      28 feet - 4 to 6 hash marks.
      It’s all about the angle - the tractor should be one yard ( or about ) away from the front cone. See this on the videos on having a good setup. The video on fixing a poor setup.
      If the student has learned how to control the movement of the trailer, that student will always be successful with this SKILL.

    • @btaylor8849
      @btaylor8849 4 місяці тому

      @@truckerstevecdlinstructor thanks for the info

  • @MuhammadShahzad-ev7zo
    @MuhammadShahzad-ev7zo Рік тому

    What about kentucky rules plz

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  Рік тому

      Refer to your drivers manual. Offset/ parallel parking and alley dock. View my videos on off-set to the right and parallel parking.

  • @roblueker5001
    @roblueker5001 11 місяців тому

    Hi Steve, I really enjoy watching your videos. I tested today and unfortunately did not pass. This was my first attempt and I failed on the reverse offset backing. I'm very frustrated because I am just not getting it no matter how many times I try. It would be great if there was a specific formula (1 full turn to the left, right, whatever) but I haven't been able to find one. I just keep either not turning wide enough or cut it too tight on the forward offset tracking. I aced my pre trip, brakes, and in cab so It was really disappointing to fail the offset parts of the skills test. Any advice you could give would be greatly appreciated. Again, thanks for the great informative videos.

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  11 місяців тому

      What is the size of the trailer- 48 or 53 feet? Day cab or sleeper?
      When you started the reverse offset, how many points if any did you have? When you failed, did you run out of time or points. Any other reason?
      Will try to give you an answer tomorrow.

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  11 місяців тому

      Will you be able to get additional practice time?
      Please go to the FMCSA website and get a copy of your records. Your CDL school sends information to the FMCSA- certified that you are proficient in all skills.

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  11 місяців тому

      Uploaded a video for you- reverse offset for Rob. May be of some help

    • @roblueker5001
      @roblueker5001 11 місяців тому

      It was a 53 foot trailer with a sleeper. I hit a cone on the forward offset tracking which were my first points. Then on the reverse I hit more on the passenger side backing up. At that point the examiner called it and said that 8 points is the limit and that I already had 9 so he ended the exam.

    • @roblueker5001
      @roblueker5001 11 місяців тому

      I can retake the exam November 22 but it will cost $300 to be paid to the school and it will include one practice day. However during that practice session I will likely get only one chance since there are other students and the session is only 2 1/2 hours. It was a real let down because I never really had the move down on my own without instructor direction.

  • @nevaehmorgan4030
    @nevaehmorgan4030 Рік тому

    During the maneuver, is there a timer running to complete the maneuver? Because l go slowly and carefully when I park.

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  Рік тому +2

      Yes. You will have ten minutes per maneuver. More than enough time. Most students do this maneuver in 5 minutes or less.

    • @nevaehmorgan4030
      @nevaehmorgan4030 Рік тому +2

      @@truckerstevecdlinstructor thanks for the information. I'm terrified of failing, especially when I think of the time, effort and money I am putting in.

    • @showtime591
      @showtime591 Рік тому +2

      Omg..Love you for this.. nobody is good at teaching in Maryland for the new test they got out... No wonder they have it where you can't make any comments they don't want to be accountable for the bad teaching so grateful for you you know your stuff and I can tell you have a passion for it

    • @truckerstevecdlinstructor
      @truckerstevecdlinstructor  Рік тому +1

      Hi Show Time, what CDL school are you training with? All students must or should voice their concerns ( complaints) to the highest levels at their schools. Thank you for your comment.

    • @showtime591
      @showtime591 Рік тому +2

      @@truckerstevecdlinstructor 160 driving academy in Maryland which leaves a lot to be desired and it's a shame that we have to do our research elsewhere when we paid all that money to go to school but when I'm talking about online I'm talking about other people that make videos for Maryland but yet they don't do a good job nor do they try to put in any effort they be all over the place still using the old skills when we're trying to learn the new Maryland skills and verbiage I know you know him cuz I've seen you around them but I just didn't want to put it out on here