How to quickly check if a uPVC door is sitting out of adjustment and needing readjusting

[@DGPSUK]

If not done so already please help the channel grow by pressing that SUBSCRIBE buttom. 🙏🤝

[@famdegroot1988]

Hi, could you show how the door gets adjusted upwards or downwards?

[@DGPSUK]

@@famdegroot1988 Hi, this can be achieved by adjusting the hinges, send an image of you hinge if the following video doesn't help .. ua-cam.com/video/MhkPsMDuwaI/v-deo.htmlsi=tEvo26kmvDLelAXC

[@harveylinney]

Need to be shown how to plumb the door once fitted. IE gap at the bottom tight as the top when lined up against the frame before closing.

[@bjkas9000]

Hi.can you help.mine closes. Lockes easily when door is wide open.but you have to push handle really hard up to lock.do i have to adjust up or down????

[@DGPSUK]

Hi, if you could send us some images of the door lock and the locking positions we could advise. Send to [e-mail]. Thank you

[@explorewithant]

Hi,,yes my door needs lifting a bit because the roller catches at the bottom,,how do I lift it pal

[@DGPSUK]

Hi, there are a few ways to do it via the hinges or heeling and toeing the glazing, what style is your door. Send some images over to [e-mail] 👍

[@tomalex4806]

On my uPVC door the hooks, roller cams and lock sits fine... The only problem is it the catch doesn't latch if that makes sense. The thing that pushes in with the latch...
So for the door to be closed and not locked i have to lift it up for it to stay closed before i even lock it

[@DGPSUK]

Hi, sounds like you need to adjust the latch on the keep. Send me some images and I'll have a look. [e-mail] 👍

[@julianengel492]

So how do I adjust it if it is too low?

[@DGPSUK]

Hi, you can adjust the door via the hinge adjustment or re-pack the glazing to pull the door back into alignment.

[@icooper5236]

The easies check is the welds on the frame and door should line through,if not it needs adjusting or it's not been fitted square

[@DGPSUK]

Yes that's another good check just as long as the door was all lined up properly during manufacture 👍

[@stephenadams9767]

thanks a big help

[@DGPSUK]

Very welcome

[@shakeycola4933]

How do you ''push'' up

[@DGPSUK]

Hi, do you mean push the door up to realign?

[@mickramo498]

great advise

[@DGPSUK]

Thank you 😊

[@ChrisTheSparky]

This is great but try this on my brown door that's right up against the wall...

[@DGPSUK]

Ah yes not so easy 😞

[@ChrisTheSparky]

@@DGPSUK Thanks for the great vid, I managed to get a torch down the wall to see things and now the key turns like silk 👍🏽

[@DGPSUK]

@@ChrisTheSparky excellent I'm glad these videos help, even just to point anyone in the right direction 😊

[@willrandall7689]

Cheers pal

[@DGPSUK]

Very welcome 😊

[@forestranger312]

Clear as mud

[@dggm19]

Wish I could understand what he's saying.

[@DGPSUK]

The joys of being Scottish 😊😊😊

[@Bluewolfe96-r1d]

I can understand him perfectly well. Are you hard of hearing ?

[@colin1493]

Easily understood by me, thanks.