great thanks, very much appreciated - just moved into a house and had to really fight the door opening and closing for 6 weeks and i've watched this video twice and the door is fixed after 5 minutes - thank you very much...!
Thank you for the video, it was a lifesaver. I followed your method & my door now shuts/opens perfectly with no catching or rubbing! & that's after weeks/months of fiddling, screwing & adjustments with no success...& lots of swearing 😂
It would be good to see a dismantled hinge to understand how it works. Our back door needs periodic re adjustment. Not sure if it is vibration altering the adjustment? Our front door hasn't needed any adjustment but isn't used as much.
When adjusting the hinge upwards like you've done with the bottom hinge, you should also do the same with the rest of the hinges. Otherwise the other hinges will be under pressure and will end up squeaking and eventually will fail
Thanks for the video and explanation. Does the same process apply to stable doors? i.e. those which are split top and bottom? Should they be treated as two seperate doors when it comes to adjustments? Thanks in advance.
It lifts the whole door ‘slab’ The gap will increase across the bottom evenly. The first method he used basically re - squares the slab in the frame. Stick a spirit level on the frame head and sill , then up the hinge side , see if it is plumb would be a good move as well.
If you mean at the end where he lifts the door at the bottom underneath hinge. The whole door should slightly rise with this adjustment. But we are talking in millimetres.
great thanks, very much appreciated - just moved into a house and had to really fight the door opening and closing for 6 weeks and i've watched this video twice and the door is fixed after 5 minutes - thank you very much...!
Doors needing adjustment after 2mths of use. Why can’t they install things well anymore
They can… you get what you pay for.
Doors will always drop naturally a few months after being installed
Thank you for the video, it was a lifesaver. I followed your method & my door now shuts/opens perfectly with no catching or rubbing! & that's after weeks/months of fiddling, screwing & adjustments with no success...& lots of swearing 😂
It would be good to see a dismantled hinge to understand how it works.
Our back door needs periodic re adjustment. Not sure if it is vibration altering the adjustment? Our front door hasn't needed any adjustment but isn't used as much.
What's the grub screw for between the 2 pips
Great vid!! Can i ask our door has a thumb lock instead of a handle which is a terrible design and stiff to turn. Our these the standard now?
When adjusting the hinge upwards like you've done with the bottom hinge, you should also do the same with the rest of the hinges. Otherwise the other hinges will be under pressure and will end up squeaking and eventually will fail
Many thanks for the video. All sorted out.
Thanks for the video and explanation. Does the same process apply to stable doors? i.e. those which are split top and bottom? Should they be treated as two seperate doors when it comes to adjustments? Thanks in advance.
I've had nothing but trouble with the bottom section of our £3000 stable door - things are just poorly made and fitted compared with what it replaced.
Thank you, very helpful
I think I have the same hinges on my door. Can you tell me the make and if possible the part number please.
When you adjust the Allen key on the underside of the hinge you only did the one, is that enough or are you supposed to do all three? Cheers.
Bottom hinge you said anticlockwise but turned clockwise.
Screw was upside down-thats why
Screw you.
Didn’t work. Looks like the 3 screws holding door to the wall are loose. How the he’ll do I get to them behind the hinge?
Please advise us on the make of door you have. Or send a photo to service@tvwindows.com
Thank you so much just leveled my door 🎉
cheers for the advice.
It lifts the whole door ‘slab’
The gap will increase across the bottom evenly.
The first method he used basically re - squares the slab in the frame.
Stick a spirit level on the frame head and sill , then up the hinge side , see if it is plumb would be a good move as well.
You could do with knowing the difference between clockwise and anti-clockwise lad lol
The screw was upside down !! He was correct
Cheers pal 👍👍
When you say "it lifts the door" its not clear whether you mean the hinge side or the handle side
If you mean at the end where he lifts the door at the bottom underneath hinge. The whole door should slightly rise with this adjustment. But we are talking in millimetres.
Pips? Thought it was a cap.
All i understood, that the main thing in this job is have a Stanley knife, otherwise you'll not adjust without Stanley 😂.
Good
perfect