Better trick for the black without masking. Fill the body with water up to the side and front splitting and paint on inside as normal.. better than on the outside
Good video but if I'm not mistaken the can you used was a TS not a PS. But I'm loving the bittydesign bodies as the look fantastic and good accessories etc etc.
How do you fix the wing side pieces to the main wing? IV just bought this body and it's my first from bitty however I think the instructions are missing from the pack. Do I just glue them? Wondering what the little clear egg shaped pieces are as well. Thanks.
I’m curious why they don’t do stickers that go on the inside before paint….. wouldn’t that ensure the stickers never come off? I know they’d have to reverse the stickers… just seems like they could have done it a better way. Awesome informative video. It takes me forever to get a body mounted (like hours)
Glad you enjoyed the video. This one won't but the new 1/7 seven65 GT body may. Click the link and check the dimensions. www.hearnshobbies.com/products/bittydesign-seven65-gt-body-for-arrma-infraction-felony-rtr-1-7-cars-clear-body
Good going very well explain keep up the good work 👍
I’m starting to get into r.c. Cars
That's cool.
@@HearnsHobbiesMelbourne ur nice
@@HearnsHobbiesMelbourne ur vids are cool to
Very helpful tips. I'm just getting into rc, and looking at this clear body and wide kit has me a bit scared but now not so much. Thank you sir!
Glad I could help
Better trick for the black without masking. Fill the body with water up to the side and front splitting and paint on inside as normal.. better than on the outside
Never heard of using water as a mask. Thank you for your suggestion.
Good video but if I'm not mistaken the can you used was a TS not a PS. But I'm loving the bittydesign bodies as the look fantastic and good accessories etc etc.
The bittydesign bodies are great.
What is the cercle stickers on the window masking for?
Aunque no me he enterado de tu explicación porque no se inglés tengo que decir que el video me ha ayudado mucho. Muchas gracias.
sweeet just got this body shell too, thanks for the tips appreciate it
Glad you enjoyed the video. Best of luck with your new body!
How do you fix the wing side pieces to the main wing? IV just bought this body and it's my first from bitty however I think the instructions are missing from the pack. Do I just glue them? Wondering what the little clear egg shaped pieces are as well. Thanks.
Most of us use double sided tape to hold on the wing end plates. Some people glue them on with Shoo Goo.
Can it fit Kyosho MK2 fazer? (Wheelbase 260mm, width 200mm)
It should fit, this is fits most 190mm touring cars.
I’m curious why they don’t do stickers that go on the inside before paint….. wouldn’t that ensure the stickers never come off? I know they’d have to reverse the stickers… just seems like they could have done it a better way. Awesome informative video. It takes me forever to get a body mounted (like hours)
Great suggestion, I am sure that Bittydesign went down that path for a good reason; that said most possibly both ways are an option.
What I learned with planes… spray clear coat after stickers. Keeps stickers on and UV protects.
What wheels do u hav on there
Hi. Is this body fit into vaterra touring?
From memory the Vattera had 30mm rear wheels. It could fit however this is a 190mm body. Check the width and see if you are around 190mm
Nice video. Will it fit yhe arrma limitless?
Glad you enjoyed the video.
This one won't but the new 1/7 seven65 GT body may.
Click the link and check the dimensions.
www.hearnshobbies.com/products/bittydesign-seven65-gt-body-for-arrma-infraction-felony-rtr-1-7-cars-clear-body
Can this use on tamiya TA05ms?
Yes you can
Someone has any recommendations for an 1.12 Boody i use the feyue fy01 fighter
Sorry, I am not familiar with that car.
I guess if it’s going to be a shelf queen......otherwise the black is the most vulnerable to damage😂
🤣🤣 we actually run it! It is not bad... i guess you are going to crush here and there a little!
Can you do zooracing baybee videoclip?
I guess we could.. :) we have not had much dealing with ZooRacing hence why no video. Maybe one day.
Is it 1/10 scale body?
yes, it is
Will this fit a slash 2wd
Most likely not....
Where can I order that? Been looking for a while now.
We have the 1/12 scale Agata in stock www.hearnshobbies.com/products/bittydesign-gt12-clear-body-shell-agata-for-1-12-supastox-class-bdgt12-agt
can i know that bodyshell size?
this is a 1/10 scale, 190mm.
@@HearnsHobbiesMelbourne ohh ok tq so much bro😊
Where can I get these
Here.
where can I buy this if i'm in South Africa??????????
Please contact Bittydesin in Italy
Because I found a race lamb
I hope the lamb doesn't mind.
Never thought to trim the outside for the black bits.
Glad we could assist! Thank you for watching!
why would you want to use ts ? If you wanted to use pearl white as the colour ,you could have used ps pearl clear then ps white over it!
Ts doesn't stick to polycarbonate..... Will flake off.
Ps is the only one that will stay on.
@@ryurc3033i know that im asking why he used ts ,didnt you read my comment i clearly asked why he's using ts instead ps
why didn't you wash the body? thing is going to chip like no other any time the plastic is impacted.
He said he washed the body earlier
No chips as yet.
can this use on tamyia tt-02?
Yes you can.
Does fit a 4tec 2.0
No sorry, The 4tec 2.0 is too wide.