Вставка
- Опубліковано 13 лип 2023
- We’ve got channels for all your car content needs. Subscribe, nerds!
The Hoonigans: / @thehoonigans
Ken Block: / @kenblockhhic
Project Garage: / @hooniganprojectgarage
Daily Transmission: / @hoonigandailytransmis...
Bonus: / @hooniganbonus
Stay fresh with the latest apparel: hoonigan.com/collections/the-...
Facebook: / thehoonigans
Instagram: / thehoonigans
Follow Our Crew:
Brian Scotto / brianscotto
Ron / roncar
Vin / vin_tra
Zac / mister_zachary
Gary / kinganytime
Big Rich / thatdudebigrich
Jameson / ronin_metalworks
Josh / josh__ohana
Angelo / tpfmfg
Jared / unicorn_tamer
Do yourself a favor and hit the bell so you don’t miss any uploads.
MERCH ➤ shop.hoonigan.com - Авто та транспорт
The celeritech sound so much different and better under load then it does on open rev
Just idle and free rev the borla has it, under load Celeritech all the way.
Just swap them back and forth as desired 😂😂 I'd go Texas Speed/ Borla all day
Big facts borla for the daily n celeritech on the weekends
Needed the shot under load
I like the traditional chop of the borla. But I also love to be different from the bunch. That Celeritech exhaust system sounds insane and menacing!!
Under load and driving around the celeritech sounds sooo good. It's a very unique sound
Whatever gives you MO POWER BABY
Second one sounded clean
Number 2 It has that growl and you can hear the cam✊️😎
Love the Texas speed setup. Can’t lose
Personally I love the celeritch, sounds insane
the celeritech at high revs sounds incredible. imagine combining it with a 9000 rpm build. I think based on everybody's reactions in the video, it might be too loud for a daily though.
Resonator and good performance mufflers would fix that, anything straight piped sounds like shit idc how many cylinders you have
There´s a reason, the Borla exhaust was tested after the Celeritech. The choice is already made. 😉👌
Borla system is an american-sound! 👍
Who cares, doesn't affect the sound😂
@@slickman5969 Repent and believe the gospel of Jesus
If you can, do a half and half. Cut and weld the left side of one to the right side of another. Thats where i thought this was going at first😂
I have the BORLA ATAK with factory manifolds/cats and still sounds amazing!
I love the sound of the Celeritech under load and it sounds nice at idle free rev not so much but the traditional set up sounds good all around the nice deep chop at idle the free rev and under load
I want to hear both under load. The borla has that real throaty sound that I like, but I Wana hear the other kit on a third gear wide open pull.
In the full video, they do a couple pulls and it sounds kinda like a Ferrari v8. Honestly it’s impressive I’d never expect an LS to make those sounds lol
@sethmurphy531 oh shit, I'll have to catch up on some of their newer content, I've been busy and not really on UA-cam much.
Texas Speed w. Borla is the one for you Zach
I wonder how a valvetronic setup would affect celeritech. As I would want that sound until I pulled up next to a cop 😂
I gotta go with the chop.
I'm torn. I love the chop but that other exhaust sounds so good.
The NPP exhaust is the best of both worlds.
Should have used the flyby shot for the sound. They both sound much better on the flyby, especially the flyby.
Personally, I get the allure of the classic Borla setup. But the celeritech sounds so different and good. That's where my vote is going.
I like the second one. Texas with the Borla.
I love the cat back one it’s a classic but I like the idea of turning heads because of a Ferrari sound coming out of a corvette rather than just loud sounds
Sounded more like a rotary to me
With headphones I closed my eyes and heard an Infinity g35 I’m not a fan
I love the growl and chop of the cam with that vodka exhaust
Texas speed w borla 100%
The answer is easy to what sounds better. It's yes
That Texas speed set up with the BA sounds incredible… loud doesn’t always mean sounds better
That Texas speed 👍
Back pressure left the chat
this clip I'd say #2
The 2. Is just Wild
I’m with sound 1 that sounds nutty
Texas speed sounds heavenly
Celeritech all the way
After reading some comments, I’d like see hear them both idle longer and hear them under load, maybe some donuts 🤔
Keep the traditional. That celeritech would be nice behind boost though
I'd go with the borla
The second sound
#2 for sure 💯
Texas speed headers + Borla for sure the celertech sounds like an N/A Honda that's been straight piped
That celeritech sounds wild man
Number 2 definitely for me
Borla has that chop
I say you put a 50/50 one side bora and the other side speed to give it a mad man sound
shoulda include the fly by clips for both
#1 sounds like someone connected some tin cans they found on the side of the road together and called it exhaust.
1st one sounds like ima take on le man and 2nd sounds beefy 🫠🤌🏾💪🏾😩
The exhaust with the borla Cat-Back sounds better at idle, but it loses the chop at higher RPMs
Put half of each exhaust on the car from the headers back. Two sounds at one time from one car. 🤯
I said this on the original video, but the Lotus engineered LT5 that came in the C4 ZR1 deserves that Celeritech exhaust
2! So good!
#2
The second with borla
I need to hear that first one under a strong pull before I can say for sure what's gonna be the best sound
I'm still confused on how they got the exhaust pulses to sound so equal, WITHOUT a crossover primary on the out-of-sequence cylinders 🤯
Borla sounded like some old school muscle in my opinion
Option 1
We need revive Ken Block. Make the second Hoonicorn pls
The 2nd one sounds much better to me
Is there any way to get a celeritech??
Definitely the BORLA exhaust.😎👍🏁
Corsa with Kooks LTs and off road pipes
Texas speed with borla. Got to have the chop.
Me personally I love the first one, guess I just like the more traditional sound. But hey man you do you right👍🏼 granted they both sound great just 4me I definitely like 1. Have a great day✌🏼 Brother, 🇺🇸🇺🇸🇺🇸💪🏼😎
Obviously the Texas Speed and Borla setup. That’s the sound of a cross plane 2 valve American V8. The other is trying to be a B18C1 VTec from an Integra GS-R. Nothing wrong with Integras, had one myself back in the day. But the Texas Speed is sexy.
#2 for sure
Hi peach sounds very good
One of each
I thought they were going to cut both the exhausts in half and put them on the same car but obviously they weld it back
I’d always take the traditional Corvette V8 sound on a Vette, that’s just my personal taste. The Celeritech at idle sounds insane though.
I’m curious as to the Celeritech paired with the Ataks.
Borla hands down
Need to hear it on a wot 3-4 gear pull😂
Do half and half, a throaty V4 with a flat plane crank.
The Celeritech is a mind bender. It sounds a little off to me just being so buzzy. Sounded great under load but the Texas Speed/Borla combo is the sound I kind of fell in love with Vettes for. Little sports car, big knocker of a V8.
What wheels are those. Thnks
Civic and civic with uel headers yes you can for sure.
Lol, I thought you'd take half from each system and put them together. I'm curious what that would sound like now 🤔
I want to hear more audio of celleritec… can’t find many other vids of the same setup
Sound 1!
Traditional.Celeritech sounds insane but not for a corvette.
TSP and Borla
The second one
I thought each side of exhaust was going have different systems and thus one car two car sounds
Why are the headers listed at $0 on the website?
Install half of it to left manifold and install half of it to the right side of engine 😂
Where do they sale this kit
What would happen if you put both of those headers on both sides of the engine?
I've never been a fan of the quad tips. I prefer dual tips so I wonder what the second kit would be like without thr quad tips and maybe just two 4.5 inch tips.....just a thought
2
Texas speed baby
Celeritech sounds like a rotary tbh
The typical LS sound is good, but I'm over it. The best sounding LS, to me, has long tubes with true dual exhaust. Meaning no crossover pipe.
Borla hands down!
The borla exhaust
Celeritech needs at least a resonator
celeritech sounds sick. every grandpa corvette chops
Maybe the mic cans handle the Celeritech but I thought it sounds like garbage. Borla has my vote.
cant decide, cut them in half and weld one half of each to each side