One person brake bleed, the basic principle most people don't get

Поділитися
Вставка
  • Опубліковано 23 лис 2024

КОМЕНТАРІ • 6

  • @Sandysand701
    @Sandysand701 5 днів тому

    You can still have the collection bottle/pot lower than the nipple if you use a long pipe, just make sure it has a curve in it higher than the nipple, then any bubbles will rise to the curve and not go around it. I like the idea of putting grease on the thread, I've always been worried air would get back round it if loose. I've used a stick (broom handle) in the past, push the brake pedal down with it and jam it against the seat backrest so it stays down, then tighten the nipple up.

  • @sm400
    @sm400 6 днів тому

    For 20 years I've been putting a knot in the bleed tube...

  • @DougAskin
    @DougAskin 8 днів тому

    Cool, I never thought of putting the bottle higher, make sense. My problem is it wont stay on the nipple unless I put a hose clamp on it, I open it and push the pedal down and put the jack handle between the pedal and the seat then close the nipple

    • @bruceaskin9645
      @bruceaskin9645  7 днів тому +3

      The bottle was only high because I didnt have a long enough hose. The whole purpose of the hose running up is to keep the air away from the nipple so it cant be drawn back into the system.

    • @trustjesus1250
      @trustjesus1250 6 днів тому +1

      Some good mechanical physics! the atomic state of gas is lighter than liquid so it rises. Bravo. ​@bruceaskin9645

    • @supercraig2009
      @supercraig2009 5 днів тому +1

      Ive heard some put a tie wrap around the hose that's connected to the nipple
      I'm looking at performing a brake flush on my Nissan Frontier here soon. Never done a flush myself so will be my 1st time