Brewzilla (Robobrew) v3.1.1 Unboxing And Assembly Video
Вставка
- Опубліковано 15 лип 2020
- In this video we unbox the newest Brewzilla v3.1.1 We also show you how to assemble the unit to prepare for your first brew day. Looking for an online homebrew supply shop in Canada? Check out our webstore www.graintoglass.ca
the tip about the kettle jacket and kids sold me on the upgrade alone.
Help with the Control Panel! I completed my first batch but had problems with the control panel. Could you please do a video on how the Control Panel works? Love this channel, BTW!
Excellent video. Thanks. The detail, sequence, and pace was very good. Plus, I did not need to watch some guys grubby garage.
Thank you for this Great video.. Explained very well. Just got mine today, still learning.
pro tip .. use a hop spider and put the tube in it at beginning of boil with the pump running , you catch a ton of loose grain and hops that would otherwise end up as gunk at bottom
Fantastic video. I was extraordinarily confused when my unit came without an instruction manual. After finding the "official" manual online, I quickly realized that it's... not very comprehensive. At all. Your step-by-step is absolutely perfect. Thanks!
Cheers!
Agreed. The manual's information density is not very high, and the "use" instructions are mixed in with the "assembly" instructions.
thanks- took a lot of anxiety away putting this together with you- next will be the brewing - first is always the hardest but in time will be fine tuning ! :)
Happy to help! If you're looking for a brew day video showing all of the steps we have one here. It goes over the gen3 and gen4 ua-cam.com/video/vSygE03IxcA/v-deo.html
Great video!! Very very helpful!! I got my brewzilla in Mexico a no manual inside!! So you save my life!! Thanks
Happy to help!
Thank you for this from Halifax! I'm new to home brewing and excited to try this out. Your video was super helpful
My Brewzilla 3.1.1 just showed up today. This video made assembly incredibly simple. I'm looking forward to trying it out
Glad to hear it. Good luck on your first brew day!
Thanks for the walk through. I've pre-ordered mine and am anxious to get started. Cheers MC
Awesome video! Thanks for all the info
So super helpful! I just got my first Brewzilla and this told me everything I needed to know. Thank you!!!
You are so welcome!
I've just bought a Brewzilla. I am spanish speaker, but I understand pretty well your english. I am so anxious to make my first beer!!!!
Thank you!
Thank you!! Helped so much, excited to start brewing in the next few days!
Thank you so much for the upload Paul and crew! I'm upgrading my current set up and this video has all but pushed Robobrew over the line
Got mine today and here we are!!
Good video. I had a few questions about assembly that were completely answered. Bonus material on brewing overview covered a few items I hadn't thought of. I have been brewing on a propane burner for years, looking forward to using for the first time this weekend.
This answered so many questions I had. Thanks!
Nicely done! We look forward to our next brew!
Having just received my Brewzilla, this video was extremely useful. Thanks for making it.
Cheers!
Thank you! New Brewzilla owner and this was really helpful.
Fantastic! slow and clear unboxing video. Really useful. Thank you!
Cheers!
Great video helped a ton. I thought I was missing the cone until you showed that the rubber plug was inside it.
The manual could probably have mentioned this, I had to discover that via an online homebrew forum.
Excellent set up video. Thank you
Cheers!
Great, great video! I'm using my unit in a couple of days later and this video has been all I needed to know the general use and some details to have in mind too. Thanks a lot and cheers from Chile.
Glad it was helpful!
Incredibly helpful video - really, really appreciate it.
Cheers!
Great video Paul. I have over 12 5 Gallon batches on my BrewZilla 3.1 that I purchased 9 months ago from Grain to Glass it is holding up great! Going to take it completely apart on year one for a very in-depth cleaning and resealing of the fittings. Paul also got me hooked on the fermzilla's and I purchased two and rigged up temperature control the combo makes for perfectly consistent batches.
Glad to hear you're liking the Brewzilla and Fermzilla!
very good and informative video. Good job Sherminator
Great video for a newbie like me. You got me through the hard part, my only recommendation would be if you showed parts of an actual brew since I'm wondering how the plate over the grain bed will function and also how the controls operate.
Hi Ryan, we will be uploading a brew day video sometime in the next month. Cheers
Great video, thank you!
Very useful and well presented video. Only aspect missing was the use of the control panel. But hopefully I can figure that out for myself. Cheers.
Thank you I'm planning on purchasing this unit in a few months before summer starts your video is awesome.
What's the volume off a final single batch with this unit.
@@keithwaldner7652 I usually brew a 21L batch so after fermentation it fills a 19L corny keg. You could brew a bit more than that if you wanted to.
@@graintoglass
Thank you
Very informative, thanks for taking the time to make this video. I'm looking at buying a Brewzilla but want to know how my brew day will look beforehand.
Superb video! Now I know what I want for Christmas! Well....maybe next Christmas! Haha! Cheers!
This was the exact video I needed in my life after my brewzilla arrived today 😂
Glad it helped!
Update (April 2021): I just unboxed a new 3.1.1, and it did not come with two lower screens - only the one with the threads. The fine-mesh screen was not included. And it sounds like it isn't that useful anyway, since there are lots of videos that say using both screens causes clogging.
Great video! It would be very beneficial if you could actually do a brew day demo! Thanks
I think you are quite a genius
Cheers
Great video to reference when putting it together! Would you also recommend getting a whirlpool arm?
They work well but I prefer the drill attached grainfather whirlpool/aerator
What's wrong with those Robobrew people to make an expensive product and not provide a manual. Love your video.
I think you should come up with a little hang-on basket that fits onto some of the external bits, maybe the bottom of the pump, to put the overflow valve and the pipe blocker .... I can see those getting lost real fast. Another place to put your logo and URL on.
Thank you very much, I am assembling it now and the instructions I found online are inadequate. You your video is so helpful and completes my assembly and gives me ideas about the brewing process with this system. I want to know how long do you sparge for?
I just use a jug and pour my sparge water over top. I don't time it or anything.
Shouldn't you only put the false bottom in for the boil? Otherwise wouldn't recirculation not work correctly? i.e. grains that get past the grain pipe's filter could get stuck above the false bottom instead of beign recirced back to the top of the mash. And then those would stay in the boil and boiling grains is meant to be bad.
This is the missing manual!
Thanks for this video, I just put mine together following your instructions, the only problem I have is one of the lid handles is faulty and doesn't fit, but there's no instructions that can fix that!
Luckily I live near the manufacturer so I'll be taking the lid to them to get fixed
Hopefully they were able to get that fixed for you.
@@graintoglass Yep they had a quick look at it and gave me a new lid handle on the spot
Interesting, I purchased one 08/24/2021 and it did not come with the fine bottom screen. Looking forward to giving it a go this weekend. Thanks for the video.
The shipment of Brewzillas we received after we made this video didn't come with the fine mesh screen.
Great video. First go with my Brewzilla now.
Sparging seems to be taking a long time. Maybe my grain is crushed too fine and blocking the bottom plate somewhat?
Hey, if you are using the fine mesh screen I would recommend not using it. Otherwise grain crush might be to fine or if your recipe had a lot of flakes or wheat malt it tends to cause issues. Using a couple hand fulls of rice hulls next time should help. Cheers!
Very informative video. Can you elaborate on what improvements were made to this 3.1.1? I didn’t notice anything different from my 3.1, I assume it’s something in the control programming.
I honestly couldn't find anything other than improved circuit board when I tried to research the differences. At some point I will take apart the 3.1 and 3.1.1 to see if I can spot any internal differences.
@@graintoglass They added an alteration to the programming: there's now *two* "AUTO" modes. One starts the next step's timer immediately upon finishing each programmed step. The other AUTO mode waits until the next step's set temperature has been achieved and THEN starts the timer. I only know this 'cause I saw a review of the v3 (not the 3.1.1) and the reviewer specifically complained about a lack of a preheat version of the timers. Apparently one of the designers eventually saw the review. Haha.
I'm looking at ditching my propane set up for this. My question, can you really plug this into any outlet? Or do I need to make sure it's on a circuit where not much else is going too? I plan to run this in the garage, maybe a light or 2 on but that's about it. If I wanted to run it in the house, would I run into issues if it's on the same circuit as say, a fridge, or a TV and sound system?
Also, could you just have the mash pipe installed while you heat up your mash water? Why heat it up, THEN put it in?
It draws give or take 1500 watts so it will depend on what else is plugged into that circuit. I have yet to run into any issues and I've plugged it in various outlets inside and outside of my house. I leave the mash pipe in the Brewzilla while it heats up.
Thanks for instructions. I just bought the system yesterday. I noticed that i didnt have the same mesh screens in the grain basket that you show in the video. These are thicker and stainless steel color. Is this what the new models are shipping with?
My new unit just arrived and it only has one bottom screen (the one with the threads), and the upper screen with the two little grips.
@@T_Mo271 my local brewstore said apparently they are shipping them without them. They said they had reached out to the company and are waiting for confirmation.
I have no experience with any all in one electric brew system, but I'm wondering if it is possible to ferment in the brewzilla or other electric all in one systems? If how?
I've seen people do it but I personally wouldn't.
When rinsing and cleaning the Brewzilla, can the controller on the bottom get wet?
It should be fine but I do my best to avoid getting it wet.
Two questions:
1. How much sparge water are you supposed to use?
2. What fittings attach to the Chiller?
Sparge water will vary based on amount of grain and batch size. Use a calculator like the one in Brewfather to calculate mash and sparge volumes. On the chiller for the cold water in I have 1/2" tubing connected with a hose clamp that goes to a garden hose fitting and for the hot water out I use high temperature silicon tubing. Cheers
Hi, very good thanks, but what new in 3.1..1 please and is there any real difference other than price between this and the Grainfather, thanks
The Grainfather has a very good 3 year warranty, bluetooth connection and a counterflow chiller. Other than that they are the same and I find both make equally good beer. Cheers
You said 1/2" x 5/8" for the silicon hose. Does that mean either will do? Or is it 1/2" inside diameter and 5/8" outside?
1/2" inside 5/8" outside. Cheers
I am getting E3 error. The machine doesn’t start. I filled up my brew zilla with 20+ litres of water. Waited for half hour. But still doesn’t start. Any trouble shooting ideas. ?
Hello, according to the manual:
E3 error: This indicates the boil dry protection has been triggered. This can be triggered for several reasons including:
If the BrewZilla has been operated when it has not been filled at least to the minimum liquid fill line. If this happens it will trigger the boil dry error. Please make sure the BrewZilla is always filled to at least the minim fill line.
The pump has pumped the boiler dry. For instance if you block off the overflow tube that allows excess liquid to return to the boiler this can result in pumping all the liquid into the malt pipe and then the liquid level in the boiler will be too low and cause this error to occur. Always make sure to have enough liquid in the BrewZilla so even when the pump has pumped liquid into your malt pipe you still have enough in the bottom of the boiler to ensure the boil dry protection has not been triggered.
Solids in the boiler such as excessive hops, sugars or other solids. For instance if you pour a kg of sugar into the boiler all at once this will cover the element and act like a blanket. This will allow the element to reach temperatures that are above boiling point and this will result in triggering the boil dry protection. The same thing can happen when excessive hops, and other solids sit and cover up the element.
This error may also indicate that a wire may have come loose from a terminal, a wire is connected to the incorrect terminal or the main circuit board/LCD are malfunctioning.
I've also heard of many people fixing this error by replacing the circuit board or both circuit board and lcd screen. Just make sure that both are version 3.1.1
Do you use the "falsebottom" all the time...? A friend of mine tells me to throw it away..
Hello, yes I use the false bottom all the time. Not sure why you wouldn't want to, it will block hops and other stuff from getting into the pump.
Maybe your friend is referring to the secondary mash screen? if thats the case then yeah i threw mine away...my sparges were taking HOURS
Ciao, per caso mi aiuteresti a sapere l'efficenza dell'importo?
Ciao, scusa ma ho usato google translate e non sono sicuro di quale sia la tua domanda.
Scusa, intendevo L'efficienza in percentuale dell'impianto generation 3.1.1 35L
@@montefabio8067 Ciao, non sono ancora sicuro di cosa intendi. Se stai chiedendo dell'efficienza del mash, di solito ottengo %75-80.
I got the whirlpool arm too..how would you use that ?
Use it instead of the recirculation arm during chilling.
@@graintoglass does it matter what direction it's flowing ?
@@pfunk10sp it shouldn't matter.
DwR!!!
Before putting that on a milk crate the company should put taller feet on the bottom,
Can I get it in India ??
Not sure, we unfortunately only ship within Canada.
You mention gallons, as a Canadian I have no idea what you mean or what gallon. Please refer to litres as they are universally understood without ambiguity. The same to Fahrenheit, have not used that for over 40 years and find it meaningless.
Mate, get an online converter if you can’t do it yourself. He didn’t do this vid just for you. I live in a metric world too and just appreciate what he’s done. Really, it ain’t that hard.