My Email For Sponsorship Offers Hungrydansgot2eat@gmail.com INSTAGRAM instagram.com/ifixshet?igshid=NzZlODBkYWE4Ng== The Official I Fix Shet Facebook page To ask questions and Receive help or just partake in the group activities facebook.com/groups/631191488517301/?ref=share_group_link PayPal ID Email For Donations If you feel so inclined to support what I do. Hungrydansgot2eat@gmail.com
Hey Dan , I watch your videos like this one and see and hear you sure do know your stuff when you do Scooter trouble shooting and repair. It's great you offer this service out of your Garage. I know you enjoy what you do.
2700 miles this exact scoot. Broke studs. Then those exact bolts backed out. When replaced one of them sheered off clean. Fixed all that then exhaust fell apart. Then the carb spring that applies tension to close the throttle snapped leaving me stuck at full throttle. Replaced carb Then has mysterious vac leak that couldn't be found even after replacing intake, vac lines, and all.the crap it connects too. After try8ng different carbs and swapping them out all of a sudden the carb that I took out that wasn't helping all of a sudden worked. The bike was exactly 1 year old. I rode it gently as it's a daily driver and it just kept falling apart. It got to the point I have to work on it everyday. I'm still really angry.... I wanted to smash it and then drop a nuke on China. I went in and bought a lance Cabo 200i.
I watched all your videos and even bought some tools like yours.. but anyways I fixed my Gaskets and after trying to turn it on it won’t start 😣😣 do you might know why ?
@@Rainaman- yes, timing chain, changed spark and closed it all up good and tightly. I changed gaskets too. Eventually it turned on and doesn’t leak anymore but always has hard time starting for few seconds but will never stay on unless I start riding
@@Rainaman- it will turn off at stop lights so I turn back on and start riding again and stays on until I stop. But it doesn’t turn off every time it’s like a time limit then it turns off
@@AlphaEyad i am guessing you have a carb not injection right? Maybe the electronic choke is busted or maybe you need to adjust the idle screw on carb. But seeing you done the whole rebuild I guess you already set those things as well. Had a problem where scooter would die at stops(and was hard time starting) and turns out it was that electronic choke for me, so who knows, maybe thats the culprit for you as well
Where do i buy a valve cover like the one your scooter has. Mine is cracked and i cant find it any where. The ones I’ve found have the integrated egr valve. But my egr valve is coming off the exhaust pipe
@@IFixShet i looked all over ebay but didnt find one that looks like your valve cover. I already ordered one but it doesn’t fit bolt pattern is a bit different only three bolts line up
@@IFixShet I tried that but no luck BN157QMJ-3 *D2508743* those are the model numbers. Idk that this engine have so many different valve covers. I might have to settle with jb weld. I really just wanted to buy a new one but im having no luck finding one
I am a shop I do things properly if I was to start it immediately after fixing it it would just ruin the gasket. He came by in the morning and scooped up his scooter sometimes we don't always get lucky and we have to complete a video where it ends Due to time constraints.
@@IFixShet they are small holes in the air filter where thry go ? Do they need to be connected to another thing ? Now i have problem my sccoter was staying with one click without the air filter after finishing repairing the motor and upgrade the cylinder from 125cc to 150cc but after I'm did put the air filter it won't start really easy i need to shock the carburator ( closing the air flow with my hands and try to start and them let breed after having some fule sucked by the carburator.... It's the a solution ???
@@faroukchehata2431 make a video for me and post the link or send me an email of the video asking your question that way it's easier for me to discern what you're talking about hungrydansgot2eat@gmail.com
@@ragadallas1982 yes that's not a valve however a state or is like basically an alternator for small vehicles think about it like a magneto or a stator when the engine starts spinning at a fast enough RPM it creates a magnetic current that charges your battery and runs a lot of your electronics
@@ragadallas1982 if you're curious where it's at it's located behind the fan so you need to remove the heat shroud and then take the fan off and you will see it behind it
It's this hanger bolts you are messing with that made me get rid of bike. The rear end depends on both for structural integrity. I didn't realize until I traded my in that I was really close to having a horrific accident. This bike is pure junk. Of the 3 other Chinese shoots this one is the absolute worst built crap. Don't buy amigo
My Email For Sponsorship Offers Hungrydansgot2eat@gmail.com
INSTAGRAM
instagram.com/ifixshet?igshid=NzZlODBkYWE4Ng==
The Official I Fix Shet Facebook page
To ask questions and Receive help or just partake in the group activities
facebook.com/groups/631191488517301/?ref=share_group_link
PayPal ID Email For Donations If you feel so inclined to support what I do.
Hungrydansgot2eat@gmail.com
Hey Dan , I watch your videos like this one and see and hear you sure do know your stuff when you do Scooter trouble shooting and repair. It's great you offer this service out of your Garage. I know you enjoy what you do.
Your videos are so much better because you have your hands free to do stuff with. That camera headband really makes the difference. Great Video.
2700 miles this exact scoot. Broke studs. Then those exact bolts backed out. When replaced one of them sheered off clean.
Fixed all that then exhaust fell apart.
Then the carb spring that applies tension to close the throttle snapped leaving me stuck at full throttle.
Replaced carb Then has mysterious vac leak that couldn't be found even after replacing intake, vac lines, and all.the crap it connects too.
After try8ng different carbs and swapping them out all of a sudden the carb that I took out that wasn't helping all of a sudden worked.
The bike was exactly 1 year old. I rode it gently as it's a daily driver and it just kept falling apart. It got to the point I have to work on it everyday.
I'm still really angry.... I wanted to smash it and then drop a nuke on China.
I went in and bought a lance Cabo 200i.
That "gouge" in the head is factory. Mine had it. The exhaust leak melted shroud.
Great videos. Did you use a new or the old valve cover gasket with r TV or only rTV?
my 1p61qmk is leaking just like this one ill try what you did .great vid
My scooter leaking oil too but it’s brand new trying figure out why
Even new bikes have defects when you just have to get in there and figure out what's going on it's a great way to learn your new scooter
@@IFixShet hey man thanks so much for the reply I may hit you up in the future for advice I love your channel man I’m def a fan
I watched all your videos and even bought some tools like yours.. but anyways I fixed my Gaskets and after trying to turn it on it won’t start 😣😣 do you might know why ?
Also why do the valve tappers change quickly
Well, you either don't have spark or compression. When changing cylinder gaskets did you set timing right?
@@Rainaman- yes, timing chain, changed spark and closed it all up good and tightly. I changed gaskets too. Eventually it turned on and doesn’t leak anymore but always has hard time starting for few seconds but will never stay on unless I start riding
@@Rainaman- it will turn off at stop lights so I turn back on and start riding again and stays on until I stop. But it doesn’t turn off every time it’s like a time limit then it turns off
@@AlphaEyad i am guessing you have a carb not injection right? Maybe the electronic choke is busted or maybe you need to adjust the idle screw on carb. But seeing you done the whole rebuild I guess you already set those things as well. Had a problem where scooter would die at stops(and was hard time starting) and turns out it was that electronic choke for me, so who knows, maybe thats the culprit for you as well
Where do i buy a valve cover like the one your scooter has. Mine is cracked and i cant find it any where. The ones I’ve found have the integrated egr valve. But my egr valve is coming off the exhaust pipe
Ebay
@@IFixShet i looked all over ebay but didnt find one that looks like your valve cover. I already ordered one but it doesn’t fit bolt pattern is a bit different only three bolts line up
@@supertitan21 you order parts by looking up the model number of your engine wich is located on the bottom of the engine on the Kickstand side
@@IFixShet I tried that but no luck BN157QMJ-3
*D2508743* those are the model numbers.
Idk that this engine have so many different valve covers. I might have to settle with jb weld. I really just wanted to buy a new one but im having no luck finding one
So that rubber part that melted in the video that’s bad? My rubber part for my exhaust melted a bit didn’t think it was a big deal though
Yeah it's a big deal
@@IFixShetis there a way to put another rubber piece on? How would you recommend me fix it?
unfortunate you didnt record it running
I am a shop I do things properly if I was to start it immediately after fixing it it would just ruin the gasket. He came by in the morning and scooped up his scooter sometimes we don't always get lucky and we have to complete a video where it ends Due to time constraints.
Man o have so many questions on a oil leak issue
So ask your questions
I need to. Get. Fix. Moped scooter.
Can you help i don't know how to connect small air filter Small tube
I'm not sure what you're talking about
@@IFixShet they are small holes in the air filter where thry go ? Do they need to be connected to another thing ? Now i have problem my sccoter was staying with one click without the air filter after finishing repairing the motor and upgrade the cylinder from 125cc to 150cc but after I'm did put the air filter it won't start really easy i need to shock the carburator ( closing the air flow with my hands and try to start and them let breed after having some fule sucked by the carburator.... It's the a solution ???
@@faroukchehata2431 make a video for me and post the link or send me an email of the video asking your question that way it's easier for me to discern what you're talking about hungrydansgot2eat@gmail.com
@@IFixShet okay i will thanks a lot man
Is there anything by the name: sater valve seal or something similar ??
I have no idea what you're talking about
stator
@@ragadallas1982 yes that's not a valve however a state or is like basically an alternator for small vehicles think about it like a magneto or a stator when the engine starts spinning at a fast enough RPM it creates a magnetic current that charges your battery and runs a lot of your electronics
@@ragadallas1982 if you're curious where it's at it's located behind the fan so you need to remove the heat shroud and then take the fan off and you will see it behind it
It's this hanger bolts you are messing with that made me get rid of bike.
The rear end depends on both for structural integrity. I didn't realize until I traded my in that I was really close to having a horrific accident.
This bike is pure junk. Of the 3 other Chinese shoots this one is the absolute worst built crap.
Don't buy amigo
Hello my friend, what would cause a 150cc gy6 motor not to take oil when I'm filling it after changing the oil?