So glad I stumbled onto your page! Great work you are producing. I have gotten tons of info from watching your vids. I make a few things here and there, and have seen a few tricks you do to make things go faster. Keep e'm coming!
@ 7:07 there was that clear plastic sheet you placed on the foil , would you please kindly tell me how to get one and under what category I name it or search for ?? thanks
Great Video! Thanks for taking the time to complete a step by step video. I can't tell you how lucky we are to have people like you willing to share their expertise !!!! I do have have one question. What is the name on the large knife or scalpel you used in the video and where can I purchase one??? Thanks again!!!!!!!!!!! Regards, RJ. Fern
i was just about to add "you could save alot of time carving those slots for the bearings by using a dremel", then i see you use a dremel for the wire grooves. why not dreml out those slots? it would be much neater and so much easier. i started carving my lures from scratch. and was so proud that they were 100% handmade by me, right from cutting the wood in the bush to painting them. not one power tool. but, now i have incorporated sanders, dremels, scroll saw, airbrush, lathe, etc. i'm just addicted to making them now, and want to make as many as possible, so i sped up many processes.
breathe and squeeze .you do have a good point but sometimes I just like the intricacies that come with making them by hand and limiting the power tools
it's a Japanese right handed single bevel carving knife by far the best I have ever bought for carving, cuts through the wood, any wood like butter, easy to clean, and sharpen.
Hello, excellent job, congratulations. I want to know what kind of knife, i saw japanese , do you use? In addition to adhere the iridescent paint or a glue?
Massimiliano De Matteo yes the knife is a Japanese right handed single bevel carving knive, you can get it from amazon I think mine was $30, they are definitely worth it, as far as the finish goes its actually translucent gift wrap paper I bought at a hobby store combined with rubber cement and aluminium duct tape, all of them give you that finish
Hello!!! Congratulations for your channel and your work, I find it very interesting !! A question please, what caliber do you have the weights you use for your lures ?? Thank you
muy buen video, muy didáctico, yo fabrico los míos con acrílico, son mas pesados y el problema que tengo es con el color me haces alguna sugerencia ? gracias !!
FishingInstinctsSRQ hola como estas??muy buen trabajo...una preg q es la ultima capa transparente q se le aplica...es laca o una resina transparente? Gracias
usually you can find it at any home improvement store, I think I bought it at home depot, but if you have to search online it's called aluminum Duct Tape
they work both ways, the way it's set up now it's a low rattle, but by placing a small metal disk at the back you for the balls to strike you can change the pitch.
Anthony Moeun I would love to, but for the past month and a half red tide has been in full grasp of my fishing wholes,but ill make sure to make one as soon as the red tide stop.
juan betancor mucho gustó hablar con un fan, y tienes una buena idea, dame tantito tiempo para poder hacer tu idea en una video. ...my correo electrónico es ..luciolopez69@Yahoo.com déjame tu correo en un mensaje para cuando este listo poder hablar contiguo.
I like it.....I LIKE IT A LOT. Loving the idea of gluing the pearlised cellophane to the aluminium a TOP TIP. Thank you for sharing 👍😷👍🏴
Awesome lure making skills man! I wish I was at least half as good as you ....but I keep trying.
So glad I stumbled onto your page! Great work you are producing. I have gotten tons of info from watching your vids. I make a few things here and there, and have seen a few tricks you do to make things go faster. Keep e'm coming!
no problem, I have a few things that I am working on for this weekend
I'll be back to check e'm out for sure!
Nice work well done friend
thank you senior valuable experience shared with us God bless senir always success in every work
wicked looking lure when finished. great job. rattles are always a bonus.
breathe and squeeze thanks for watching
Totally awesome! You are a master in carving- very artistic! Thank you for the video.
watchman316ly thanks for watching.
Nice job! Do you have a video with the swimming action of this lure?
Very nice work!
Anglers Pursuit thanks
Would you show us how you made the wooden vice ,looks very helpful
Vincent Foti alright I'll have it up by Sunday
Where i can by this knife ????
Buen video amigo una pregunta, que madera utiliza? gracias
What kind of wood do you use ? Is that balsa wood ?
@ 7:07 there was that clear plastic sheet you placed on the foil , would you please kindly tell me how to get one and under what category I name it or search for ??
thanks
cking_closure its made by Prisma Crafts and its called iriescent wrap I bought mine at a party store.
Brilliant idea brother. I do 3d print lures and your ideas are coming very handy. Thanks.
looks great!
Great Video! Thanks for taking the time to complete a step by step video. I can't tell you how lucky we are to have people like you willing to share their expertise !!!!
I do have have one question. What is the name on the large knife or scalpel you used in the video and where can I purchase one??? Thanks again!!!!!!!!!!!
Regards,
RJ. Fern
there is something similar to this?
Parabens pelo seu trabalho esta isca artificial artesanal ficou muito show 👍🐟
Perfect👍👍👍
where the leads were bought
Great video is that your own design if so like the simplicity
Vincent Foti its is an original, all of them are and thanks for the comments
Excellent job l my self make lures also and I use bass wood what kind wood are you using.keep it up again excellent job.
infiniti2003 I like an good inbetween a hard and soft but mostly use basswood
Perfect job 😉
Marcelo Ferreira thanks for watching
Hi.. great job,
What is the material u use in 7.05 on the silver ?
I mean over the foil? the transparent thing ?
Papagan Egitim that is semi translucent wrapping paper
FishingInstinctsSRQ Hi and congratulations for your job. it is amazing. where can I find that papagam egitim ? if you can say it.
Daniele Mari its Aluminum Duct tape, spy can get it at any general store.
Are talking about translucent paper ? It looks like nail art foil.
merry christmas.from
where did you purchase this weldwood?
nikosfazer nikos merry Christmas to you too and i bought it at a home improvement store called home depot, but its just regular rubber cement
is the same for cook?
You can use that. But this one is used for heating and cooling, you can get it at a home improvement store next to the duct tape .
Trens de Pesca - Brasil - Belo trabalho, parabéns!
magnifique et quelle maitrise !!! Bravo...
thank you for sharing...👍👍👍
i was just about to add "you could save alot of time carving those slots for the bearings by using a dremel", then i see you use a dremel for the wire grooves. why not dreml out those slots? it would be much neater and so much easier. i started carving my lures from scratch. and was so proud that they were 100% handmade by me, right from cutting the wood in the bush to painting them. not one power tool. but, now i have incorporated sanders, dremels, scroll saw, airbrush, lathe, etc. i'm just addicted to making them now, and want to make as many as possible, so i sped up many processes.
breathe and squeeze .you do have a good point but sometimes I just like the intricacies that come with making them by hand and limiting the power tools
Good job!
Thanks
Where do you get the lure holders at with the alligator clips?
They sell them at a store called Harbor Freight.
What kind of carving knife is that?
it's a Japanese right handed single bevel carving knife by far the best I have ever bought for carving, cuts through the wood, any wood like butter, easy to clean, and sharpen.
Hello, excellent job, congratulations. I want to know what kind of knife, i saw japanese , do you use? In addition to adhere the iridescent paint or a glue?
Massimiliano De Matteo yes the knife is a Japanese right handed single bevel carving knive, you can get it from amazon I think mine was $30, they are definitely worth it, as far as the finish goes its actually translucent gift wrap paper I bought at a hobby store combined with rubber cement and aluminium duct tape, all of them give you that finish
FishingInstinctsSRQ , forgive me I saw a can , what it was?
Massimiliano De Matteo if it was a big metallic can that was the rubber cement
I would ask you a lot in post photos of the products you use? I can notunderstand what it is?
By adding the bearings did you achieve neutral bouyancy? or are those rattles only?
Ben Hollinger both where achieved
How can I have those razors in Mexico?
Jaime Corona you can get them shippedthete directly from amazon
Hello!!! Congratulations for your channel and your work, I find it very interesting !! A question please, what caliber do you have the weights you use for your lures ?? Thank you
Alexpescasanpedro thanks for watching and they are mostly 0.22
muy buen video, muy didáctico, yo fabrico los míos con acrílico, son mas pesados y el problema que tengo es con el color me haces alguna sugerencia ? gracias !!
Leonel Moreno con El acrilico se puede mezclar globos de vidrio para que floté, con la pintura se puede usar un sellador antes dé aplicar la pintura.
gracias hermano.... lo tomaré en cuenta
FishingInstinctsSRQ hola como estas??muy buen trabajo...una preg q es la ultima capa transparente q se le aplica...es laca o una resina transparente? Gracias
Hi brother can you tell me.
Size of barring balls you use
Size of Wood thickness and long many sentimeeter ????
Great work! what kind of motor is that for your lure dryer?
Dexter Acasio it originally was a type of light that rotates, but you can use golf microwave motor, discobal motor.
Nice work. Whats the name of the knife you use ?
The first shaping knife not the craft knife. Thanks
what paper is? aluminium?
yes its aluminum duct tape
I subscribed and left a like
Really nice work! Where did you get this aluminum foil are you using? It has an adhesive side? Thanks!
usually you can find it at any home improvement store, I think I bought it at home depot, but if you have to search online it's called aluminum Duct Tape
Very nice :)
morinjo morski thank you
good job man
Cana Trens de Pesca - Brasil - SP - Belo trabalho.
what wood are you using
MR-FLIP its b
Bass wood
thank you. amazing work
MR-FLIP thanks for the compliment
man bro... you're awesome at making these. some I will definitely try to learn. do you use the slingshot ammo for weight or for rattle?
they work both ways, the way it's set up now it's a low rattle, but by placing a small metal disk at the back you for the balls to strike you can change the pitch.
Un verdadero virtuoso!!
Buen trabajo. El video genial
Great video as usual! How long did you wait for the contact cement to dry with the iridescent wrap until you put it onto the lure body?
Not long just enough to have it be tacky
Ok, cool. Thanks!
Super 👍
I am from GREECE
and when I tried to buy it do not send too me.
nikosfazer nikos have you tried amazon for it they usually do a hood job of getting things done
Out of curiosity would you make a video of you fishing with one of the lures you've made?
Anthony Moeun I would love to, but for the past month and a half red tide has been in full grasp of my fishing wholes,but ill make sure to make one as soon as the red tide stop.
What did you use to make your videos
Vinfish F it's the go pro sesh
FishingInstinctsSRQ Thx that’s for editing also
Thank you bro!! have facebook?
the lip is missing ( ' __ ' )?
Leo Tan with this type of bait the lip isn't needed.
FishingInstinctsSRQ saw the one behind has a lip XP
Thinking you are going to make the same type
Leo Tan it was more to show the type of finish and how two types of lure can be made form the same design.
Ya read it on the tittle of video
Just mentioning
Thx anyway
parabens,shou,belo video
Hola soy de Canarias, me gustaría tener un señuelo fabricado por ti, te sigo y me gustaría tenerlo, un saludo gracias
juan betancor mucho gustó hablar con un fan, y tienes una buena idea, dame tantito tiempo para poder hacer tu idea en una video. ...my correo electrónico es ..luciolopez69@Yahoo.com déjame tu correo en un mensaje para cuando este listo poder hablar contiguo.
Superrrr, thanks
Great Job.
xxxmirekxxx1 thanks its always good to hear back from the people who watch it.
FishingInstinctsSRQ You're welcome.
Yes, I watch and make lures too !
xxxmirekxxx1 grate finally e fellow lure smith
muito show
jerri souza dos santos souza dos santos Obrigado