Sig Sauer P365 Budget Holster That Won’t Scratch Your Slide
Вставка
- Опубліковано 2 сер 2024
- Amazon Link - amzn.to/3IglT7R
Discount Code - Currently 25% off with Prime
Gun & Flower also has holsters available for Glock 17, 19, 43 - Smith & Wesson M&P 9 and M&P Shield - Springfield Hellcat - Taurus G2C
🚫 No Firearms Sales 🚫
UA-cam: / ohiogunsdeals
Email: ohiogunsndeals@gmail.com
Instagram: / ohio_guns_n_deals
As an Amazon Associate I earn from qualifying purchases
I agree completely! I can’t stand when some holsters absolutely destroy the finish on my pistols. I’m okay with wear over time but not from just a few draws and there is scratch mark all the way down the slide. Especially when gun finishes are not cheap to get redone
- I get so many comments about how your gun is a tool and you shouldn’t care about how it looks. I like mine to look clean. I have pistols that are almost always 20 years old that look brand new
Thanks for this review....Bought this holster 2 weeks ago, replaced plastic clip with soft loops and a Tulster sidekick claw.....for what I've invested, this is perfect for my P365.....Yes, full leather is nice, but like Diesel fuel these days, priced too high. Not needing to show off a fancy leather holster, this is a tool, that's outta sight outta mind, solidly built, works well and won't break the bank.
The reason you add leather to kydex would be for the comfort to the human . Leather absorbs moisture. You have the leather part touching your gun you can have a greater chance of surface rust. The other negative I would say is that that clip the "fomi" type sux balls. It will not lock to your belt and when you draw your gun creates the situation where you also draw the holster. That is just my input.
- I agree with both points however I’ve had an LCP in a leather pocket holster for over 16 years and there still isn’t a speck of rust on it. I don’t carry it daily which probably helps and a pocket isn’t as sweaty as your waist but it’s definitely gotten wet over the years. Those clips definitely suck on that cheap holster. I wouldn’t trust it at all. I like the dcc monoblock clips
With ALL THE "MADE IN USA" quality choices, there is NO REASON to buy a holster made in China.
Thats a deal breaker for me.
Same for me. Trying to stop giving money to the red army.
Parts of eve are Chinese.
...or amazon
@@920WASHBURN - Agreed.
I have a Gun & Flower for my p365x macro with an xl grip module from Wilson Combat. So far so good (I have had it for almost two weeks). Mine isn't leather lined but I like it that way. It's super smooth on the inside and advertised not to scratch the slide.
Looks like a nice holster. To get the click that we all like to hear when holstering, all you need to do is take the retention screw out and flex the holster apart a bit so you can remove some leather at the front of the trigger well. Then you will hear the click.👍
Thanks for sharing. Been interested in a leather lined Kydex holster but the price has always kept me away until now.
Wear on the finish of your firearm is gonna happen over time no matter what and only adds to the asthetics of the look of your pistol. It shows you carry and use(practice) with your pistol. Leather wears the gun too. I blow the dust and grit out of my kydex holsters to minimize the wear anyway.
If your have this holster and want Monoblock clip you need to use the monoblock clip from Tulster, the standard Discreet Carry Monoblock screw holes are wider apart it will fit but it binds up and just doesn't grab your belt as tight. Order the Monoblock clip from Tulster it is the correct size. This is a really a good holster and great for practicing your draw without risk of scratching or wearing your slide, it's worth the price just for that but I've been carrying it and I think it's a good carry holster. It might slow your draw just a little because of the leather the way it grabs your pistol it might slow your draw a little, trade offs for everything but it's cert worth the price.
I've changed all the hardware as I like Monoblock clips on all my holsters and also the button screws for the clip and tension have a ⭐ symbol which I didn't care for so I changed everything.
Get a Kusiak form shaped and treated leather holster made in Texas for the P365.
I need one of these for my P938 & likely the P365 I'm getting tomorrow 👍
Looks pretty solid. I would expect some leather wear over time. Nice review 🇺🇸
It said made in China on the box. Plenty of made in America holsters to choose from. It’s a hard pass from me.
I agree with statements on plastic clips. I like metal ones also for the very same reasons. I believe I missed where you purchase your metal clips at?
Just bought one with leather for $25 at that price you can’t beat it even if it’s garbage 🤘🏻
I just got a canik rival and am looking for a case. I like the leather inside its so quiet, plus my kydex one gets a little Jerry. Wish this one was for a canik
There’s no cover of the mag release either with is a no go for me
Only way to prevent wear is to leave in box and never take out.
Cool holster
my only concern is how long until leather separate from kydex
My thoughts exactly. If you use it daily like most of us do I don't see it taking long.
Nice. My slides are already scratched up. lol.
Leather retains moisture and may cause surface rust
Nice!
Another great video. Can you guide me to the peel and stick claw and metal clip?
Born and raised in NE Ohio not in California, God bless and thanks.
- The claw is made by Tulster and is called the Sidekick. The metal clip I use and recommend is called the DCC Monoblock. Both things can be ordered from the Tulster website
Saw them
Grip sticks out because your stomach LOL mine does the same thing
Not leather wrapped, it’s leather lined
Misleading title. These are not leather lined. They are micro fiber lined.
Even the logo design is a copy. I hope Tulster can sue them.
Do you have a recommendation for a tuckable holster?
- Vedder
P. Doetsch Kusiak leather made in Texas.
@@Steve-Goff I abandoned the idea. Pocket holsters turned out to be a better solution than I would have thought and tuckable holsters were impossible to conceal without adding 30lbs to my gut.
Made in CHIIIII NUH
If you’re worried about the finish on your gun getting ruined, just leave it in your safe. I’m sure it’ll stay nice and clean and pristine in there. But if you plan to actually carry it, then don’t worry about some scratches. You shouldn’t be showing off your carry gun anyways.
- there’s nothing wrong with wanting a tool to perform well and look clean at the same time. If I use a wrench and get grease all over it, I clean it off before it goes back in the toolbox
How has this holster been treating you so far?
- I actually have stuck with the Tulster. I saw your comment on that video about how it scratched your slide. I’ve tried several holsters and prefer the Tulster
@@Steve-Goff The Tulster is really an awesome holster other than the scuffing, but I have gotten so used to it and its wounds give my pistol character
You need a Wilson Combat grip.
- I’ve looked at them a 100 times and have added them to my cart a dozen times and always back out of getting one. They go on sale often for like $45
What’s the discount code?
- it may have expired but they’re frequently on sale for around $30
On your affiliate link don’t see option p365
- they usually only manufacture so many of them at a time. They’re not a huge manufacturer. If you can wait, check back periodically
The only holster that doesn't do that is the l fat guy holster.
That looks to loose…
- You don’t get the clicking sound that locks the trigger guard into the holster but it’s definitely not too loose. It has plenty of retention
Made in China... I'll pass
- just about everything is nowadays including the phone or computer you made the comment on