Brilliant video and awesome job, I hate that silver color too and was actually enough to make me not buy that model s4, I think you have changed my view, I love the carbon fiber look, good job 👍🏽
For that second piece, you could maybe of used some knifeless tape to get a fine cut and then possibly used a little heat and squeegied the tape into the crevice. Difficult one, and also odd that that section appears to be plastic welded together to the chrome trim as you say.
Just changed the trims to the new ones. To change the center piece, I highly recommend just removing the center console - it’s not that hard and will take less time.. 😅
Okay, i bought some wood vinyl wrap and trim removal kit. Ready to tackle this thing today... until i saw this video :( Anyone know of a shop in Vegas that would do this for me?
Lol I was going to install all of these trims tomorrow, I’m glad I saw this video because that will not be happening now😂 insane for that center console one. I also have a carbon fiber piece for the gear selector. Hopefully it’s not too expensive to get done at a shop! Good video though man, you are extremely patient
@@UltimateDIY that’s amazing, I watched the video when you done it, great that it’s still looking good 2 years later, I started watching your videos again, i am a big fan and have bought a few things you showcased on the channel, I’m Totally impressed that the wrap is still as good as the day you installed it, I drive an A5 and need to wrap the centre console which is a pain in the ass but some Chinese guys as offering a ready mage carbon overlay so might go that route but the rest of the car interior will be wrapped 👏👍👍👍
The contact is on when you put the key in the ignition, but you don't start the engine. If you "woke" up the car while the button was unplugged, the you get this error. Also, do not replace the button, there are more variants and if you install the wrong one, it will also create this error.
Hey bud, did you have issues with an airbag light after disconnecting the airbag connection near the radio display? I plugged mine back in and reassembled but the airbag light is still on
As far as I can remember this happens when you put on the contact while it's disconnected. To make 100% sure it does not happen, you can also disconnect the battery before. At least this is what I remember.
@@UltimateDIY by the way did you get the carbon fiber wrap online? If you did can I please have the link for it and how many inches was exactly what you bought. Thank you so much planning on doing the same on my Audi
Hey I've also wrapped my panels a few times, but the center one, with navigation is doing as well as the others because mine doesnt have that chrome'ish ring around the center. Do you have part number/link to the that panel? Keep up the good work!
Un Big Like din partea mea....cautam de ceva vreme asa ceva si nu gaseam....am urmarit tot fara sa derulez nici macar o secunda...eu am un a4 b8 din 2015 3.0 v6 tot automatic...am sa te urmaresc cu drag ,m-ai invat si eu ceva. Ms mult
@@carretto13 I painted the plastic trim in my Tahoe years ago. The main thing is to be sure to use at least two coats of plastic primer, preferably three. Do a light dusting with the first coat. Then completely cover evenly with a second but not thick. Then apply the third coat, evenly. Then paint with two coats and apply a protective clear coat to protect the paint. Auto parts stores often sell paint to match OEM colors.
@@carretto13 here's a link to photos of the Tahoe interior paint job. It was done in 2011. Unfortunately, smartphone cameras weren't very good back then. drive.google.com/folderview?id=1UBNf55SZQlq4epaqFMW6NTNvbBFgFJFa
I have picked the same wrap already thanks for sharing its nice to know where all the clips are. I am not going to take the gear stick assembly apart I will just wrap the lot I have the patience of a Saint like yourself. Doing around the roof light and sun glass holder on the roof and my mirror s outside then a complete satin grey wrap
Sorry, but it was bought from a store in my country. And it's not that great of a quality. Try to search on Amazon and read the reviews to get something good.
@@UltimateDIY Im respayring them atm metalic dark black :) I did that also with my Vw Scirocco a year ago. PS. Do you have a vid on how to add a custom amp in the car and connecting the speaker kables ?
@@UltimateDIY am si eu doua intrebari. (am un a4 b8 2011 si vreau sa mi colantez cu fibra de carbon, dar nu prea ma pricep si nici nush pe cineva care m-ar putea ajuta) 1. Esti din bucuresti ? 2. Cat ar fi manopera ?
I love that. You’re very patient and did a wonderful job.
Thank you. I love the result and can't stop looking at it when I'm in the car :)
Great job, the way you express things in English is also entertaining
Thsnks! :)
Brilliant video and awesome job, I hate that silver color too and was actually enough to make me not buy that model s4, I think you have changed my view, I love the carbon fiber look, good job 👍🏽
For that second piece, you could maybe of used some knifeless tape to get a fine cut and then possibly used a little heat and squeegied the tape into the crevice. Difficult one, and also odd that that section appears to be plastic welded together to the chrome trim as you say.
Yup, that would have helped for sure 👍🏻
Is crazy how everyone likes the carbon fiber look. Not the look for me. You did a great job though.
I like the shiny/sparkly look 😄
Carbon fiber was all that gave me the required effect.
Just changed the trims to the new ones. To change the center piece, I highly recommend just removing the center console - it’s not that hard and will take less time.. 😅
Keep the content come brotha you're my Audi connect. I have a 2011 A4 Quattro prestige.
Thank you!
▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !
▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
ua-cam.com/video/5WGOYg0EMaw/v-deo.html
Thank you very much for your amazing video
Welcome!
Just wrapped my A5 interior , I watched this video last year and was impressed, unfortunately I have not started the centre piece yet, wish me luck 😂
Good luck! 😄
Thank you so much! I have the B8 S4 prestige with the absolutely horrid wooden trim and couldn't stand it.
Glad I could help!
bruh no cap you funny asf, good job though!
Thanks :)
Okay, i bought some wood vinyl wrap and trim removal kit. Ready to tackle this thing today... until i saw this video :(
Anyone know of a shop in Vegas that would do this for me?
It's a bit more involved...
Brilliant job well done👍🏽👍🏽👍🏽👍🏽
Thank you!
Why is the centre console trim so complicated to take off?? It would make sense to just clip the plastic bit on and off 🤣🤣
Yup...it would...
Good job! You helped me .Thank you
Welcome! :)
Wow, the last piece was a hassle. Good job. I have 2013 Audi A4 Quattro and I’m wrapping the same trim.
Yes, it was a pain!
Did you wrap it? I’m doing mine today. Wish me luck lol
Awesome job 👍 got my grill swap to do on my b8 and new wheels
Nice. I am also thinking about a grill swap in the future.
Lol I was going to install all of these trims tomorrow, I’m glad I saw this video because that will not be happening now😂 insane for that center console one. I also have a carbon fiber piece for the gear selector. Hopefully it’s not too expensive to get done at a shop! Good video though man, you are extremely patient
Thank you!
It's much more involved than I expected when I started this mod.
Od razu słychać, że to Polak
Romanian, close enough 😁
@@UltimateDIY close 😝
Yup 🤭
Good video, thanks for taking the time to put it together and post.
Welcome and thanks for watching!
Can u make a video about your steering wheel
Already have a video about it: ua-cam.com/video/3QQOjNAhil0/v-deo.html
hi tell me where i can find carbon film like you not too expensive please thanks
Impossible for me to do this. You need to search for yourself in your country.
I was wondering how this is holding up 2 years down the line, do you still own the B8
Looking exactly as it did when I finished the wrap 👍🏼
@@UltimateDIY that’s amazing, I watched the video when you done it, great that it’s still looking good 2 years later, I started watching your videos again, i am a big fan and have bought a few things you showcased on the channel, I’m
Totally impressed that the wrap is still as good as the day you installed it, I drive an A5 and need to wrap the centre console which is a pain in the ass but some
Chinese guys as offering a ready mage carbon overlay so might go that route but the rest of the car interior will be wrapped 👏👍👍👍
I was really afraid it would fail after all that hard work, but it seems not.
Thank you for watching my videos! ✌🏼
Great result, seeing how difficult it was to do the center console, I doubt you will ever do the part surrounding your gear selector ... 😁😁
No, no, enoght wrapping for me 😄
It stays as you see it at the end of the video 🤭
@@UltimateDIY sounds like the wisest thing to do... 🤣🤣🤣
@@UltimateDIY still a great end result for sure!
Yup, thanks! 😊
Are there any other wraps other than carbon? Everyone does carbon
Of course they are. You chose whatever you like. I don't care what everyone does, I did it because I like it.
Ultimate DIY fair point!
I have the ugly “wooden” trim. Need it gone ASAP
🤭
I'd gladly trade you my silver trim for your wood trim
@@Noneurbidnez it’s all yours
Fain frate, te-a ieșit foarte bine da pentru la a mea prefer să mă duc undeva sa mi-o facă 😂
Multumesc! Da, e destul de mult de lucru...
Anyone else have their AIRBAG light on after they’ve done this?
Did you have your contact on while removing the airbag button? Or did you put your contact on while it was removed? That causes the error.
@@UltimateDIY not sure what you mean by contact. But all I did was remove the hazard light/airbag plug then plug it back in.
The contact is on when you put the key in the ignition, but you don't start the engine.
If you "woke" up the car while the button was unplugged, the you get this error. Also, do not replace the button, there are more variants and if you install the wrong one, it will also create this error.
@@UltimateDIY thanks for your brief explanation. How do I remove it? Do I just reset the car?
You need a VCDS interface to clear the error code I think. But I never got the error so I'm not sure.
Hey bud, did you have issues with an airbag light after disconnecting the airbag connection near the radio display? I plugged mine back in and reassembled but the airbag light is still on
As far as I can remember this happens when you put on the contact while it's disconnected. To make 100% sure it does not happen, you can also disconnect the battery before. At least this is what I remember.
Thanks for your reply! I’ll try disconnecting the battery to see if it resets it
Probably not. The idea is the car should never have known you disconnected the button. Now that it knows you need a diagnose tool to reset the error.
Oh gotcha. I ran a scanner and no faults pop up. Maybe I need the dealership to reset it now
Try to also search on forums, maybe something helps.
How can someone who needs to watch a how to video like this one , make a how to like this one ??? Size don't matter? "That's what she said"
That does not really make sense 🤔
Wooow man I really loved your video you did a great job thank you for your patient 🙏
Thank you for watching! ✌🏼
@@UltimateDIY by the way did you get the carbon fiber wrap online? If you did can I please have the link for it and how many inches was exactly what you bought.
Thank you so much planning on doing the same on my Audi
A random online store in my country.
I bought 2 meteres with 1.27m width.
do you remember where or what carbon fiber wrap you used? it looks really nice. about to do this myself as well. great video. thanks.
It's a random material from an online store in my country.
What is with your board comp, my also turn off and i cant fix it you now something?
Not sure what you mean. Mine is ok.
Foarte folositor. Îmi poți spune ce dimensiuni a avut vinyl-ul?
Asta a fost: "Folie carbon auto 3D, 2 x 1.27 M, Negru"
How is the wrap holding up? I'm concerned the sun will cause the wrap to melt and have sticky glue residues
For now it's fine.
salut ai schimbat si ceasurile sau numai trimurile?
Salut. Am facut un fel de upgrade si la ceasuri: ua-cam.com/video/dnlhAoRFnmQ/v-deo.html
Buna ziua! Cum se scoate gura de aerisire din partea pasagerului la audi a4 b8?
Salut. Nu stiu, nu am scos-o niciodata.
Great job. I have to do the same for my car
Thanks and good luck! 👍🏻
I am able to take out the parts, I would like to do carbon dipping. Normally it should last longer.
Yes, I think so.
The piano black plastic on the console it cand be removed separately for polishing it?
I do not know. Never tried it.
Hey I've also wrapped my panels a few times, but the center one, with navigation is doing as well as the others because mine doesnt have that chrome'ish ring around the center. Do you have part number/link to the that panel?
Keep up the good work!
Hi. I'we upgraded that when I installed the A5 cluster: ua-cam.com/video/dnlhAoRFnmQ/v-deo.html
Or where did u buy it or did u wrap it it looks great just wanna know about the steering wheel
Check the other comment.
Un Big Like din partea mea....cautam de ceva vreme asa ceva si nu gaseam....am urmarit tot fara sa derulez nici macar o secunda...eu am un a4 b8 din 2015 3.0 v6 tot automatic...am sa te urmaresc cu drag ,m-ai invat si eu ceva. Ms mult
Multumesc! Ma bucur ca a fost de ajutor video meu :)
Great video and great job! Quick question, can those parts be painted?
Thank you. Yes, they can be painted.
@@UltimateDIY thanks 👍🏼
@@carretto13 I painted the plastic trim in my Tahoe years ago. The main thing is to be sure to use at least two coats of plastic primer, preferably three. Do a light dusting with the first coat. Then completely cover evenly with a second but not thick. Then apply the third coat, evenly. Then paint with two coats and apply a protective clear coat to protect the paint. Auto parts stores often sell paint to match OEM colors.
@@carretto13 here's a link to photos of the Tahoe interior paint job. It was done in 2011. Unfortunately, smartphone cameras weren't very good back then.
drive.google.com/folderview?id=1UBNf55SZQlq4epaqFMW6NTNvbBFgFJFa
@@greezythumb thank you so much! I really appreciate it! 👍🏼
Great work
Thank you!
I have picked the same wrap already thanks for sharing its nice to know where all the clips are. I am not going to take the gear stick assembly apart I will just wrap the lot I have the patience of a Saint like yourself. Doing around the roof light and sun glass holder on the roof and my mirror s outside then a complete satin grey wrap
Nice!
Where or what quality wrap u used ? If u have a Amazon Ali link wil be great.
Sorry, but it was bought from a store in my country. And it's not that great of a quality. Try to search on Amazon and read the reviews to get something good.
@@UltimateDIY thnx u also didn't clean the parts before put IT on the trim ? I thinking of painting.itnor put this carbon look on IT.
I cleaned them really well with alcohool.
@@UltimateDIY Im respayring them atm metalic dark black :) I did that also with my Vw Scirocco a year ago. PS. Do you have a vid on how to add a custom amp in the car and connecting the speaker kables ?
I'm also thinking of a respray when I get bored with the carbon fiber. Sadly, I don't have a custom amp. Not enough time for installing one.
Is it possible to do it on a4 panel without that chrome around ?
I would say yes. It's just a bit different and might require some heat to mold it properly.
👍🏽
Salut, cum ai adaugat pe ecranul de la navigatie, langa ora, temperatura exterioara?
amazing job!
Thant you!
Why did he not use a heat gun
I don't know, but I will ask him.
Just jocking. I said in the video it's the first time I wrap something, so I don't know the proper way to do it.
glossy carbon will look better
Probably.
Do this work for the 2012 s4 b8?
it should. Same model, but if it is a 2013 or newer it is similar process
What fiber Vinyl? 3M?
I used some random no name.
iti dau subscribe pentru videourile cu masina
Merci
... felicitari !!!!! ...e perfect !!!!!!!!!!!!!!!!!!!!!!!!!!
Multumesc :)
Great vid
Thanks!
Salut prin ce te pot contacta ?
Salut. Doar aici prin comentarii.
Great job
Thank you!
De ce nu ai pus din ala 5d lucios?
Nu am vrut sa fie lucios :)
faci treaba buna, dar lasa engleza ca numa te caci pe tine vorbind asa...\
Foarte frumos comentariul tau si exemplifica perfect unul dintre motivele pentru care nu fac si nu voi face vreodata in romana.
Цыганский тюнинг ))
As long as I like it, I really don't care what others think.
salut frate, ai un profil de instagram sau facebook ?
Salut. Nu. Putem vorbi aici.
@@UltimateDIY am si eu doua intrebari. (am un a4 b8 2011 si vreau sa mi colantez cu fibra de carbon, dar nu prea ma pricep si nici nush pe cineva care m-ar putea ajuta)
1. Esti din bucuresti ?
2. Cat ar fi manopera ?
Din pacate nu fac lucrari platite, dar oricum nu sunt din Bucuresti.